工业废水生物综合毒性监测与评价

蚕豆微核、发光细菌急性毒性、鱼类急性毒性等实验基础上，采用PEEP（潜在的毒性效应）和CHIMIOTOX（预测毒性）等指数对6个重点行业的10家受试企业的工业废水生物综合毒性进行了监测与评价。结果表明，受试企业所排放废水的生物毒性均较大，迫切需要治理.     

The EDTA effect on phytoextraction of single and combined metals-contaminated soils using rainbow pink (Dianthus chinensis)

Rainbow pink (Dianthus chinensis), a potential phytoextraction plant, can accumulate high concentrations of Cd from metal-contaminated soils. The soils used in this study were artificially added with different metals including (1) CK: original soil, (2) Cd-treated soil: 10 mg Cd kg(-1), (3) Zn-treated soil: 100 mg Zn kg(-1), (4) Pb-treated soil: 1000 mg Pb kg(-1), (5) Cd-Zn-treated soil: 10 mg Cd kg(-1) and 100 mg Zn kg(-1), (6) Cd-Pb-treated soil: 10 mg Cd kg(-1) and 1000 mg Pb kg(-1), (7) Zn-Pb-treated soil: 100 mg Zn kg(-1) and 1000 mg Pb kg(-1), and (8) Cd-Zn-Pb-treated soil: 10 mg Cd kg(-1), 100 mg Zn kg(-1), and 1000 mg Pb kg(-1). Three concentrations of 2Na-EDTA solutions (0 (control), 2, and 5 mmol kg(-1) soil) were added to the different metals-treated soils to study the influence of applied EDTA on single and combined metals-contaminated soils phytoextraction using rainbow pink. The results showed that the Cd, Zn, Pb, Fe, or Mn concentrations in different metals-treated soil solutions significantly increased after applying 5 mmol EDTA kg(-1) (p<0.05). The metal concentrations in different metals-treated soils extracted by deionized water also significantly increased after applying 5 mmol EDTA kg(-1) (p<0.05). Because of the high extraction capacity of both 0.005 M DTPA (pH 5.3) and 0.05 M EDTA (pH 7.0), applying EDTA did not significantly increase the Cd, Zn, or Pb concentration in both extracts for most of the treatments. Applying EDTA solutions can significantly increase the Cd and Pb concentrations in the shoots of rainbow pink (p<0.05). However, this was not statistically significant for Zn because of the low Zn concentration added into the contaminated soils. The results from this study indicate that applying 5 mmol EDTA kg(-1) can significantly increase the Cd, Zn, or Pb concentrations both in the soil solution or extracted using deionized water in single or combined metals-contaminated soils, thus increasing the accumulated metals concentrations in rainbow pink shoots. The proposed method worked especially well for Pb (p<0.05). The application of 2 mmol EDTA kg(-1) might too low to enhance the phytoextraction effect when used in silty clay soils.     

Inhalation transfer factors for air pollution health risk assessment

To facilitate routine health risk assessments, we develop the concept of an inhalation transfer factor (ITF). The ITF is defined as the pollutant mass inhaled by an exposed individual per unit pollutant mass emitted from an air pollution source. A cumulative population inhalation transfer factor (PITF) is also defined to describe the total fraction of an emitted pollutant inhaled by all members of the exposed population. In this paper, ITFs and PITFs are calculated for outdoor releases from area, point, and line sources, indoor releases in single zone and multizone indoor environments, and releases within motor vehicles. Typical PITFs for an urban area from emissions outdoors are approximately 10(-6)-10(-3). PITFs associated with emissions in buildings or in moving vehicles are typically much higher, approximately 10(-3)-10(-1).     

Trends in concentration of ground-level ozone and meteorological conditions during high ozone episodes in the Kao-Ping Airshed, Taiwan

This work analyzes the variations in daily maximum 1-hr ozone (O3) concentrations and the long-term trends in annual means of hourly ambient concentrations of O3, nitrogen oxides (nitrous oxide + nitrogen dioxide), and nonmethane hydrocarbons in the three administrative regions of Kao-Ping airshed in southern Taiwan over a recent 8-yr period. The annual or monthly means of all maxima, most 95th percentiles, and some 90th percentiles of the daily maximum 1-hr O3 concentrations exceed the daily limit of 120 parts per billion by volume in all three regions, namely, Kao-hsiung City, Kso-hsiung County, and P'ing-tung County. The monthly means of daily maximum 1-hr O3 concentrations exhibit distinct seasonal variations, with a bimodal form with the maxima in autumn and late winter to the middle of spring and a minimum in summer. The long-term variations in the annual means of hourly O3 concentrations in the three regions exhibit increasing trends. These increases in O3 are associated with the decline in ambient concentrations of nitrogen oxides and nonmethane hydrocarbons. High O3 episodes occur most often in autumn and most rarely in summer. The seasonal mean mixing heights in descending order follow the order of spring, summer, autumn, and winter. Meteorological parameters in autumn and winter indicate that the ground-level O3 tends to accumulate and trigger a high O3 episode on a warm day with sufficient sunlight and low wind in a high-pressure system, consistent with the low mixing heights in these two seasons.     

我国城市的柴油车污染及防治对策探讨

当今城市大气污染物中 6 0 %— 70 %来自机动车的排放 ,而其中很大部分是柴油车的排放。作者对柴油车在城市生活中的重要地位、对在用柴油车的技术改造措施和城市环境保护的其他举措进行了研究探讨 ,提出了一些具体方案     

Profiles of PAH emission from steel and iron industries

In order to characterize the polycyclic aromatic hydrocarbons (PAHs) emission from steel and iron industries, this study measured the stack emission of twelve steel and iron plants in southern Taiwan to construct a set of source fingerprints. The study sampled the emissions by the USEPA's sampling method 5 with the modification of Graseby for the gas and particulate phase PAH and, then, used Hewlett-Packard 5890 gas chromatograph equipped with mass spectrometer detector to analyze the samples. The steel and iron industries are classified into three categories on the basis of auxiliary energy source: Category I uses coal as fuel, Category II uses heavy oil as fuel and Category III uses electric arc furnace. The pollution source profiles are obtained by averaging the ratios of individual PAH concentrations to the total concentration of 21 PAHs and total particulate matter measured in this study. Results of the study show that low molecular weight PAHs are predominant in gas plus particulate phase for all three categories. For particulate phase PAHs, however, the contribution of large molecular weight compounds increases. Two-ring PAHs account for the majority of the mass, varying from 84% to 92% with an average of 89%. The mass fractions of 3-, 4-, 5-, 6-ring PAHs in Category I are found to be more than those of the other two categories. The mass of Category III is dominated by 7-ring PAHs. Large (or heavy) molecular weight PAHs (HMW PAHs) are carcinogenic. Over all categories, these compounds are less than 1% of the total-PAH mass on the average. The indicatory PAHs are benz[a]anthracene, benzo[k]fluoranthene, benzo[ghi]perylene for Category I, benzo[a]pyrene, acenaphthene, acenaphthylene for Category II and coronene, pyrene, benzo[b]chrycene for Category III. The indicatory PAHs among categories are very different. Thus, dividing steel and iron industry into categories by auxiliary fuel is to increase the precision of estimation by a receptor model. Average total-PAH emission factors for coal, heavy oil and electric arc furnace were 4050 μg/kg-coal, 5750 μg/l-oil, 2620 μg/kW h, respectively. Carcinogenic benzo[a]pyrene for gas plus particulate phase was 2.0 g/kg-coal, 2.4 μg/l-oil and 1.4 μg/kW h for Category I, II and III, respectively.     

Performance characteristics of PM10 samplers under calm air conditions

The size range of airborne particles that is closely related to specific deposition regions in the human respiratory tract and excess lung burden of these deposited particles is associated with disease. Size-selective sampling, therefore, needs to be performed to assess the related health risks. Performance criteria applied to these samplers must be well characterized in order to provide accurate and reliable results. The PM10 samplers that have been used in place of the total suspended particulate samplers for the collection of ambient air particles are more relevant to potential inhalation hazards. In order to be certified, a PM10 sampler must meet reliable performance specifications, primarily the aerosol penetration test with liquid and solid particles in a wind tunnel (wind speeds of 2, 8, and 24 km/hr). This testing is intended to assure reasonable accuracy in aerosol measurements. However, the sampler performance under calm air conditions has not been well studied. In the present study, the sampling heads of three devices--the Harvard impactor, the Personal Environmental Monitor (PEM), and the Sierra Andersen model 241 dichotomous sampler PM10 inlet head--were tested for aerosol separation efficiency. With the consideration of bias and imprecision of the measurements, five specimens of each type of sampler were chosen for performance testing, repeating the tests 5 times for each specimen. An ultrasonic atomizing nozzle was used to nebulize potassium sodium tartrate tetrahydrate and dioctyl phthalate particles as the solid and liquid challenge aerosols, respectively. The aerosol number concentrations and size distributions upstream and downstream of the samplers were measured by using an aerosizer calibrated against a settling velocity chamber. The results showed that among the samplers tested, the dichotomous sampler PM10 inlet head had the best fit to the PM10 convention, while the other two samplers not only appeared to have a steeper separation-curve slope but also had significant particle bounce when challenged with solid particles. Analysis of variance also confirmed the superiority of the dichotomous samplers. Surface-coating with oil or grease greatly reduced the problem of particle bounce.     

大弹涂鱼(Boleophthalmus Pectinirostris)作为放射性核素指示物的研究

以大弹涂鱼为对象,模拟其两栖生活的环境,采用示踪法并用S-80智能多道分析器与Ge(Li)探头研究了大弹涂鱼的整体及其组织器官对~(137)Cs、~(134)Cs、~(65)Zn、~(60)Co的富集与排出.探讨了其积累量、残留量与海水中核素浓度的相关性,推荐性腺、肌肉、头部作为监测海洋中~(137)Cs、~(134)Cs、~(65)Zn、~(60)Co污染的生物指示物.     

查干湖汇水区面源污染风险识别及管控

面源污染是我国流域面临的主要水环境问题,为了识别面源污染高风险区和潜在风险路径,实现流域水环境保护,以查干湖水质目标为约束条件,构建4类关键“源”景观.选取高程、坡度、土地利用类型、污染强度、距居民点距离、距公路距离、距铁路距离、距水体距离等8个评价因子构建阻力面,对查干湖汇水区面源污染风险区和风险路径进行识别,提出管控分区和治理措施.结果表明:①查干湖汇水区关键“源”景观有4类,分别为面源污染单位面积高负荷区、坡度>3°区域、污染传输通道和临湖区域,面积共126.33 km2.②查干湖汇水区面源污染高风险区即面源污染重点管控区,占汇水区总面积的27.10%,主要位于乾安灌区有字泡区域、查干湖及周边泡沼沿岸.区内现有耕地不再增加,同时对坡度较大的区域退耕还湿、退耕还草,并设置污染降解设施.③查干湖汇水区面源污染较高风险区即面源污染一般管控区,占汇水区总面积的20.23%.该区鼓励开展有机农业,发展生态旅游.④查干湖北岸和东南岸、库里泡周边设置一定宽度的植被缓冲带,汇水区设置生态降解渠道333.41 km,生态湿地节点9个.研究显示,污染排放强度是查干湖汇水区面源污染风险的主要威胁因素,需要重点加强查干湖汇水区乾安灌区有字泡、湖区北岸及东南岸的面源污染管控.      

Association of serum levels of perfluoroalkyl substances with gestational diabetes mellitus and postpartum blood glucose

This study was conducted to examine the association of perfluoroalkyl substance(PFAS)exposure with gestational diabetes mellitus(GDM) risk and postpartum fasting blood glucose.We used a 1:2 matched case–control study with 84 GDM subjects and 168 healthy pregnant women from Beijing, China. The maternal blood was collected at 1–2 days before delivery, and eight linear isomers and fourteen branched isomers were determined in maternal serum.Logistic regression analyses were performed to evaluate the associations after adjusting for potential confounders. The median of the sum of levels of total PFASs was 4.24 ng/m L with a interquartile range(IQR) of 2.82–6.54 ng/m L. Although maternal PFAS exposure was not associated with risk of GDM, significant positive associations were observed between evaluated exposure to specific PFAS congeners and increasing blood glucose. The odds ratio(ORs) of the highest category of postpartum fasting blood glucose for perfluoro-1-metylheptylsulfonat(1 m-PFOS), perfluoro-3/4-metylheptylsulfonat(3 m+4 m-PFOS), perfluoro-5-metylheptylsulfonat(5 m-PFOS), and perfluorohexane sulfonate(PFHx S) were 2.03(95% CI: 1.09–3.77), 1.93(95% CI:1.04–3.58), 2.48(95% CI: 1.33–4.65), and 2.26(95% CI: 1.21–4.21), respectively, suggesting negative effects of maternal exposure to specific PFAS compounds on glucose metabolism.