Auramine dyes induce toxic effects to aquatic organisms from different trophic levels: an application of predicted non-effect concentration (PNEC)

Environmental Science and Pollution Research - The dyes Auramine and Auramine O are used in several industrial products, despite the scarce information regarding their ecotoxicity. The aim of the...     

Bioluminescent yeast estrogen assay (BLYES) as a sensitive tool to monitor surface and drinking water for estrogenicity

Estrogenic Endocrine Disrupting Chemicals (EDCs) are a concern due to their ubiquity and recognized adverse effects to humans and wildlife. Methods to assess exposure to and associated risks of their presence in aquatic environment are still under development. The aim of this work is to assess estrogenicity of raw and treated waters with different degrees of pollution. Chemical analyses of selected EDCs were performed by liquid chromatography-tandem mass spectrometry, and estrogenic activity was evaluated using in vitro bioluminescent yeast estrogen assay (BLYES). Most raw water samples (18/20) presented at least one EDC and 16 rendered positive in BLYES. When EDCs were detected, the bioassay usually provided a positive response, except when only bisphenol A was detected at low concentrations. The highest values of estrogenic activity were detected in the most polluted sites. The maximum estrogenic activity observed was 8.7 ng equiv. of E2 L(-1). We compared potencies observed in the bioassay to the relative potency of target compounds and their concentrations failed to fully explain the biological response. This indicates that bioassay is more sensitive than the chemical approach either detecting estrogenic target compounds at lower concentrations, other non-target compounds or even synergistic effects, which should be considered on further investigations. We have not detected either estrogenic activity or estrogenic compounds in drinking water. BLYES showed good sensitivity with a detection limit of 0.1 ng equiv. E2 L(-1) and it seems to be a suitable tool for water monitoring.     

Plastic pollution: A focus on freshwater biodiversity

Plastics are dominant pollutants in freshwater ecosystems worldwide. Scientific studies that investigated the interaction between plastics and freshwater biodiversity are incipient, especially if compared to the marine realm. In this review, we provide a brief overview of plastic pollution in freshwater ecosystems around the world. We found evidence of plastic ingestion by 206 freshwater species, from invertebrates to mammals, in natural or semi-natural ecosystems. In addition, we reported other consequences of synthetic polymers in freshwater ecosystems—including, for instance, the entanglement of animals of different groups (e.g., birds). The problem of plastic pollution is complex and will need coordinated actions, such as recycling programs, correct disposal, stringent legislation, regular inspection, replacement of synthetic polymers with other materials, and ecological restoration. Current information indicates that the situation in freshwater ecosystems may be as detrimental as the pollution found in the ocean, although highly underappreciated.Supplementary InformationThe online version of this article (10.1007/s13280-020-01496-5) contains supplementary material, which is available to authorized users.     

Steam gasification of waste tyre: Influence of process temperature on yield and product composition

An experimental survey of waste tyre gasification with steam as oxidizing agent has been conducted in a continuous bench scale reactor, with the aim of studying the influence of the process temperature on the yield and the composition of the products; the tests have been performed at three different temperatures, in the range of 850–1000 °C, holding all the other operational parameters (pressure, carrier gas flow, solid residence time). The experimental results show that the process seems promising in view of obtaining a good quality syngas, indicating that a higher temperature results in a higher syngas production (86 wt%) and a lower char yield, due to an enhancement of the solid–gas phase reactions with the temperature. Higher temperatures clearly result in higher hydrogen concentrations: the hydrogen content rapidly increases, attaining values higher than 65% v/v, while methane and ethylene gradually decrease over the range of the temperatures; carbon monoxide and dioxide instead, after an initial increase, show a nearly constant concentration at 1000 °C. Furthermore, in regards to the elemental composition of the synthesis gas, as the temperature increases, the carbon content continuously decreases, while the oxygen content increases; the hydrogen, being the main component of the gas fraction and having a small atomic weight, is responsible for the progressive reduction of the gas density at higher temperature.     

New objective function for data reconciliation in water balance from industrial processes

The promotion of a better rational use of water in industry requires an adequate knowledge of aqueous streams inside industrial plants. The main difficulty found in this respect is a lack of accurate measurement of such streams. In order to overcome this difficulty, a water balance tool with data reconciliation is used. This paper presents a method based on the idea that an estimated assumption can be made for any flow rate based on the best available information (quality of information). The quality of information is inversely proportional to the uncertainty of the estimated or measured flow rate and therefore there is a proportionality constant that relates these two. This paper demonstrates that the values of the proportionality constants in the real system are proximally the same for any stream. Furthermore, the proposed method has been applied to real systems with very poor measurement. This method enables the data reconciliation from water balances without data redundancy and without having to ignore flow rates with high levels of uncertainty.     

Evaluation of violations in water quality standards in the monitoring network of São Francisco River basin,the third largest in Brazil

The São Francisco River is the largest river located entirely within Brazil, and water scarcity problems have been a major concern of Brazilian society and government. Water quality issues are also a concern and have worsened with the recent intensification of urbanization and industrialization. In this study, violations to water quality standards established by local legislation were calculated as a percentage for 26 selected parameters over a monitoring period of 14 years. The violation percentages were analyzed spatially using the Kruskal-Wallis test, followed by multiple comparison analysis. Temporal analysis was performed using the Mann-Kendall test and Spearman correlation. Some parameters could be identified as cause for concern due to high violation levels, such as the fecal coliform indicator (FCI) and phosphorus—both related to domestic and effluent disposal without treatment or with insufficient treatment—and color, turbidity, manganese, and total suspended solids—which can be affected by erosive processes of natural and anthropogenic causes. The study found that these violations are concentrated in the most urbanized and industrialized areas of the basin. Some metallic parameters, such as iron and arsenic violations, may be related to mining activities in the rich soil of the Iron Quadrangle area located within the Minas Gerais State. Trend analysis results indicated that most monitoring stations did not have significant modification (elevation or reduction) trends over time, which, together with the high violation percentages, might indicate the maintenance of a scenario of constant pressure upon water resources, in particular in those more urbanized areas.