Constrained Laboratory vs. Unconstrained Steering-Induced Rollover Crash Tests

Objective: The goal of this study was to evaluate how well an in-laboratory rollover crash test methodology that constrains vehicle motion can reproduce the dynamics of unconstrained full-scale steering-induced rollover crash tests in sand.

Methods: Data from previously-published unconstrained steering-induced rollover crash tests using a full-size pickup and mid-sized sedan were analyzed to determine vehicle-to-ground impact conditions and kinematic response of the vehicles throughout the tests. Then, a pair of replicate vehicles were prepared to match the inertial properties of the steering-induced test vehicles and configured to record dynamic roof structure deformations and kinematic response.

Results: Both vehicles experienced greater increases in roll-axis angular velocities in the unconstrained tests than in the constrained tests; however, the increases that occurred during the trailing side roof interaction were nearly identical between tests for both vehicles. Both vehicles experienced linear accelerations in the constrained tests that were similar to those in the unconstrained tests, but the pickup, in particular, had accelerations that were matched in magnitude, timing, and duration very closely between the two test types. Deformations in the truck test were higher in the constrained than the unconstrained, and deformations in the sedan were greater in the unconstrained than the constrained as a result of constraints of the test fixture, and differences in impact velocity for the trailing side.

Conclusions: The results of the current study suggest that in-laboratory rollover tests can be used to simulate the injury-causing portions of unconstrained rollover crashes. To date, such a demonstration has not yet been published in the open literature. This study did, however, show that road surface can affect vehicle response in a way that may not be able to be mimicked in the laboratory. Lastly, this study showed that configuring the in-laboratory tests to match the leading-side touchdown conditions could result in differences in the trailing side impact conditions.     

Fragmentation effects on an endangered species across a gradient from the interior to edge of its range

Understanding how habitat fragmentation affects individual species is complicated by challenges associated with quantifying species-specific habitat and spatial variability in fragmentation effects within a species’ range. We aggregated a 29-year breeding survey data set for the endangered marbled murrelet (Brachyramphus marmoratus) from >42,000 forest sites throughout the Pacific Northwest (Oregon, Washington, and northern California) of the United States. We built a species distribution model (SDM) in which occupied sites were linked with Landsat imagery to quantify murrelet-specific habitat and then used occupancy models to test the hypotheses that fragmentation negatively affects murrelet breeding distribution and that these effects are amplified with distance from the marine foraging habitat toward the edge of the species’ nesting range. Murrelet habitat declined in the Pacific Northwest by 20% since 1988, whereas the proportion of habitat comprising edges increased by 17%, indicating increased fragmentation. Furthermore, fragmentation of murrelet habitat at landscape scales (within 2 km of survey stations) negatively affected occupancy of potential breeding sites, and these effects were amplified near the range edge. On the coast, the odds of occupancy decreased by 37% (95% confidence interval [CI] –54 to 12) for each 10% increase in edge habitat (i.e., fragmentation), but at the range edge (88 km inland) these odds decreased by 99% (95% CI 98 to 99). Conversely, odds of murrelet occupancy increased by 31% (95% CI 14 to 52) for each 10% increase in local edge habitat (within 100 m of survey stations). Avoidance of fragmentation at broad scales but use of locally fragmented habitat with reduced quality may help explain the lack of murrelet population recovery. Further, our results emphasize that fragmentation effects can be nuanced, scale dependent, and geographically variable. Awareness of these nuances is critical for developing landscape-level conservation strategies for species experiencing broad-scale habitat loss and fragmentation.     

Material Flow Analysis: a tool to support environmental policy decision making. Case-studies on the city of Vienna and the Swiss lowlands

This paper discusses the use of Material Flow Analysis (MFA) as a tool to support policy decision making in the field of resource and environmental management. In terms of policy, MFA can be used for early recognition, priority setting, to analyse and improve the effectiveness of measures and to design efficient material management strategies in view of sustainability. MFA has a high potential to be implemented as a guiding tool at the regional level, for example as part of a regional environmental management and audit system or as a part of the Local Agenda 21 process. Material management based on MFA is complementary to traditional environmental and resource management strategies, which have tended to focus heavily on specific environmental compartments, and measure the concentration of substances in various media. MFA, in contrast, provides an overview of the total system by linking the anthroposphere (that part of the biosphere in which humans' activities take place) with the environment. This system approach shifts the focus away from the back-end so-called 'filter strategies' to more pro-active front-end measures. MFA examines short- and long-term loadings rather than concentrations and highlights current and potential material accumulations, called material stocks. These stocks represent either potential environmental problems (e.g. large stocks of hazardous materials) or a potential source of future resources (e.g. urban mining). In this way, MFA can assist precautionary policy making by highlighting future environmental or resource issue problems without relying on signals of environmental stress. The objective of materials management is: firstly, to analyse material flows and stocks; secondly, to evaluate these results; and thirdly, to control material flows in view of certain goals such as sustainable development. MFA is an excellent tool for the first objective and is well suited to generate a base for the other two objectives. MFA results can be compared against environmental standards or can be interpreted using assessment or indicator methodologies (such as environmental impact assessment or ecological footprints). Selected results from two studies, carried out for the city of Vienna (substance management) and the Swiss lowlands (timber management), illustrate the use of MFA as a tool for early recognition (resource depletion and environmental quality), for priority setting and for effective policy making.     

Forest to reclaimed mine land use change leads to altered ecosystem structure and function.

The United States' use of coal results in many environmental alterations. In the Appalachian coal belt region, one widespread alteration is conversion of forest to reclaimed mineland. The goal of this study was to quantify the changes to ecosystem structure and function associated with a conversion from forest to reclaimed mine grassland by comparing a small watershed containing a 15-year-old reclaimed mine with a forested, reference watershed in western Maryland. Major differences were apparent between the two watersheds in terms of biogeochemistry. Total C, N, and P pools were all substantially lower at the mined site, mainly due to the removal of woody biomass but also, in the case of P, to reductions in soil pools. Mineral soil C, N, and P pools were 96%, 79%, and 69% of native soils, respectively. Although annual runoff from the watersheds was similar, the mined watershed exhibited taller, narrower storm peaks as a result of a higher soil bulk density and decreased infiltration rates. Stream export of N was much lower in the mined watershed due to lower net nitrification rates and nitrate concentrations in soil. However, stream export of sediment and P and summer stream temperature were much higher. Stream leaf decomposition was reduced and macroinvertebrate community structure was altered as a result of these changes to the stream environment. This land use change leads to substantial, long-term changes in ecosystem capital and function.     

Climate change mitigation and productivity gains in livestock supply chains: insights from regional case studies

Livestock can contribute to climate change mitigation by reducing their greenhouse gas emissions and by increasing soil carbon sequestration. Packages of mitigation techniques can bring large environmental benefits as illustrated in six case studies modeled in the Global Livestock Environmental Assessment Model developed by FAO. With feasible technical interventions in livestock production systems, the mitigation potential of each of the selected species, systems and regions ranges from 14 to 41 %. While comparably high mitigation potentials were estimated for ruminant and pig production systems in Asia, Latin America and Africa, large emission reductions can also be attained in dairy systems with already high levels of productivity, in OECD countries. Mitigation interventions can lead to a concomitant reduction in emissions and increase in production, contributing to food security. This is particularly the case for improved feeding practices and better health and herd management practices. Livestock systems also have a significant potential for sequestrating carbon in pasturelands and rangelands through improved management, as illustrated in two of the six case studies in this paper.     

Identifying sources of fecal contamination inexpensively with targeted sampling and bacterial source tracking

Most bacterial source tracking (BST) methods are too expensive for most communities to afford. We developed targeted sampling as a prelude to BST to reduce these costs. We combined targeted sampling with three inexpensive BST methods, Enterococcus speciation, detection of the esp gene, and fluorometry, to confirm the sources of fecal contamination to beaches on Georgia's Jekyll and Sea Islands during calm and stormy weather conditions. For Jekyll Island, the most likely source of contamination was bird feces because the percentage of Ent. faecalis was high (30%) and the esp gene was not detected. For the Sea Island beach during calm conditions, the most likely sources of fecal contamination were leaking sewer lines and wildlife feces. The leaking sewer lines were confirmed with fluorometry and detection of the esp gene. For the Sea Island beach during stormflow conditions, the most likely sources of fecal contamination were wildlife feces and runoff discharging from two county-maintained pipes. For the pipes, the most likely source of contamination was bird feces because the percentage of Ent. faecalis was high (30%) and the esp gene was not detected. Sediments were also a reservoir of fecal enterococci for both Jekyll and Sea Islands. Combining targeted sampling with two or more BST methods identified sources of fecal contamination quickly, easily, and inexpensively. This combination was the first time targeted sampling was conducted during stormy conditions, and the first time targeted sampling was combined with enterococcal speciation, detection of the esp gene, and fluorometry.     

Determination of steroidal estrogens in flushed dairy manure wastewater by gas chromatography-mass spectrometry

There is a critical need to accurately measure the concentrations of natural steroidal estrogens in flushed dairy manure wastewater (FDMW) to assess any potential risk of waterway contamination resulting from land application. Estrogens are a concern because low concentrations (10-100 ng L-1) in water can adversely affect aquatic vertebrate species such as fish, turtles, and frogs by disrupting the normal function of their endocrine systems. The objective of this study was to develop a sample preparation method that permits the quantification of four natural steroidal estrogens (17alpha-estradiol, 17beta-estradiol, estrone, and estriol) in FDMW by gas chromatography-mass spectrometry (GC-MS). Solid-phase extraction with graphitized carbon black was used for the bulk extraction of estrogens from FDMW and additional sample purification was accomplished with C-18. The sample preparation method allowed estrogens to be detected accurately by GC-MS in FDMW. Spiked recovery experiments indicated that the method is satisfactory for measuring the estrogens of interest in FDMW with average recovery of >90%. As expected in FDMW, characterization of the estrogen profile revealed a large abundance of 17alpha-estradiol relative to 17beta-estradiol and estrone. Estriol was not detected in FDMW. The methodology developed in this research helps provide an analytical foundation for the quantification of steroidal estrogens in FDMW by GC-MS.     

Trends of total cadmium, copper, and zinc in the zebra mussel (Dreissena polymorpha) along the upper reach of the St. Lawrence River: 1994—2005

This study examines spatial and temporal variability of bioaccumulation of cadmium, copper, and zinc in tissues of zebra mussels in the upper reach of the St. Lawrence River which originates at the outflow of Lake Ontario. It was hypothesized that concentrations of these metals in mussel tissues would decline over time and decrease with increasing distance from the outlet of Lake Ontario as a result of on-going efforts to reduce contaminant discharges into the lake. Size of mussels was also evaluated as a factor influencing bioaccumulation. Mussels were collected annually in October from six sites from 1994 to 2005, including one site near a local industry. Individuals were grouped into five or more size classes per site in each year. Soft tissues were analyzed for total cadmium, copper and zinc. Concentrations of cadmium and copper in tissues varied significantly both spatially and temporally. Cadmium concentrations were elevated at most sites; copper concentrations were moderately elevated compared with other studies in the Lake Ontario basin and St. Lawrence River. Zinc showed the most uniformity in mussels possibly due to internal regulation and to low levels of environmental exposure. Animal size correlated with copper concentrations of tissues in approximately 30% of samples but infrequently for cadmium and zinc. Cadmium and copper levels were found to decline downstream over time. Inter-annual variability of metal concentrations in mussel tissues suggests utilization in long-term monitoring programs to discern significant trends.     

The effects of tertiary treated municipal wastewater on fish communities of a small river tributary in Southern Ontario, Canada

Fish community changes associated with a tertiary treated municipal wastewater effluent outfall in the Speed River, Ontario, Canada, were evaluated at nine sites over two seasons (2008) using standardized electrofishing. Habitat evaluations were conducted to ensure that the riffle sites selected were physically similar. The fish community was dominated by several species of darters that differed in their response to the effluent outfall. There was a significant decrease in Greenside Darter (Etheostoma blennioides) but an increase in Rainbow Darter (E. caeruleum) abundance directly downstream of the outfall. Stable isotope signatures (δ¹³C and δ¹⁵N), which indicate shifts in energy utilization and flow, increased in Rainbow Darter downstream, but showed no change in Greenside Darter. Rainbow Darter may be exploiting a food source that is not as available at upstream sites giving them a competitive advantage over the Greenside Darter immediately downstream of the outfall.     

Objectives for management of socio-ecological systems in the Great Barrier Reef region,Australia

A wide range of goals and objectives have to be taken into account in natural resources management. Defining these objectives in operational terms, including dimensions such as sustainability, productivity, and equity, is by no means easy, especially if they must capture the diversity of community and stakeholder values. This is especially true in the coastal zone where land activities affect regional marine ecosystems. In this study, the aim was firstly to identify and hierarchically organise the goals and objectives for coastal systems, as defined by local stakeholders. Two case study areas are used within the Great Barrier Reef region being Mackay and Bowen–Burdekin. Secondly, the aim was to identify similarities between the case study results and thus develop a generic set of goals to be used as a starting point in other coastal communities. Results show that overarching high-level goals have nested sub-goals that contain a set of more detailed regional objectives. The similarities in high-level environmental, governance, and socio-economic goals suggest that regionally specific objectives can be developed based on a generic set of goals. The prominence of governance objectives reflects local stakeholder perceptions that current coastal zone management is not achieving the outcomes they feel important and that there is a need for increased community engagement and co-management. More importantly, it raises the question of how to make issues relevant for the local community and entice participation in the local management of public resources to achieve sustainable environmental, social, and economic management outcomes.