Shifts and stasis in marine HAB monitoring in New Zealand

This review article outlines harmful algal bloom (HAB) monitoring practices in New Zealand and highlights the shift from light microscope (LM)-based identification and quantification of the early 1990s to the use of molecular tools to support the HAB monitoring programmes two decades later. Published research and available client information from the monitoring programmes have been reviewed; HAB events and programme changes are highlighted. The current HAB monitoring practices allow for rapid determination of potential biotoxin issues for the shellfish industry and of potential ichthyotoxic events for finfish farmers. The use of molecular tools, including quantitative PCR, has improved risk assessments for those HAB species that are difficult to differentiate to species level using LM. This has enabled rapid feedback to aquaculture managers during HAB events. Tests for biotoxins in flesh remain the regulatory tools for commercially harvested shellfish, but this is supported by the weekly phytoplankton monitoring data. Recreational (non-commercial) shellfish harvesting and commercial finfish aquaculture rely solely on phytoplankton monitoring to assess the biotoxin risk. HAB monitoring in New Zealand continues to maintain internationally recognised standards, and the government-funded research programmes feed the latest knowledge and technical methods into the programmes. The early dependence on light microscopy continues but is now supported by molecular tools, with a view to employing multi-species detection systems in the future. The traditional mouse bioassay test has been fully replaced by chemical tests.     

Numerical Simulation of the Thermal Destruction of Some Chlorinated C1 and C2 Hydrocarbons

We have numerically modeled the breakdown of small quantities of several chlorinated hydrocarbons (CH₃CI, CH₂CI₂, CHCI₃, CCI₄, C₂H₃CI, and C₂H₅CI) in a lean mixture of combustion products between 800 and 1480 K. This simulates the fate of poorly atomized waste in a liquid-Injection Incinerator. Kinetics calculations were performed using the CHEMKIN and SENKIN programs, with a reaction mechanism that was developed at Louisiana State University to model flat-flame burner experiments.

A 99.99-percent destruction efficiency was attained In one second at temperatures ranging from 1280 to 960 K, with CCI4 requiring the highest temperature for destruction and C₂H₅CI the lowest. For all compounds except C₂H₅CI, there was a range of temperatures at which byproducts accounted for several percent of the elemental chlorine at the outlet. The more heavily chlorinated compounds formed more byproducts even though the amount of elemental chlorine was the same in all cases. The sensitivity of results to residence time, equivalence ratio, temperature profile, and the presence of additional chlorine, was examined for the case of CHCI₃.     

Integrated spatial health assessment of yellow perch (Perca flavescens) populations from the St. Lawrence River (QC,Canada), part B: cellular and transcriptomic effects

Environmental Science and Pollution Research - Multi-biological level assessments have become great tools to evaluate the health of aquatic ecosystems. Using this approach, a complementary study...     

Assessing the quality of marine coastal environments: comparison of scope for growth and Microtox bioassay results of pollution gradient areas in eastern Mediterranean (Greece)

Methods for assessing the quality of marine coastal environments are numerous and rapidly evolving. The integration of physiological parameters termed as Scope for Growth (SfG) and the luminescent bioassay Microtox were applied in several sites of Saronikos and Amvrakikos Gulfs (Greece) to assess the environmental quality and compare the results of the two methods. Each site in the two areas undergoes different types and levels of pollution. Both methods could identify a pollution gradient reflecting the quality of each site. A very good linear correlation was noticed between the two methods (r = 0.98). The stress order, which was similar in both methods, exhibited the expected pollution gradient according to the pressure that each site undergoes. Results suggest that for screening and fast isolation of polluted sites before further analysis, the rapid and simple Microtox assay could operate as an alternative to the more complex SfG method.     

Polycyclic aromatic hydrocarbon sampling in wastewaters using semipermeable membrane devices: accuracy of time-weighted average concentration estimations of truly dissolved compounds

Semipermeable membrane devices (SPMDs) previously spiked with performance reference compounds were exposed in wastewater. After 6 days of exposure, 13 polycyclic aromatic hydrocarbons (PAHs) were quantified in SPMDs. Exchange rate constants and time-weighted average (TWA) concentrations of SPMD-available PAHs in water were calculated. The bias of using SPMDs to estimate an actual TWA concentration if the concentration in water fluctuates, as can be expected in wastewater, was studied with numerical simulations. The bias increased with the exchange rate constant. However, most exchange rate constants evaluated in SPMDs exposed in wastewater were small enough for SPMDs to estimate a TWA concentration of PAHs even when the water concentration varied. TWA-SPMD-available concentrations were always below total dissolved (operationally defined as 0.7 microm) concentrations, indicating that part of the dissolved PAHs was not available for sampling. In situ partitioning coefficients K(DOC) were computed and found to be slightly higher than data from the literature. This confirms that only truly dissolved PAHs should be sampled by SPMDs in wastewater.     

Bioaccessibility of trace elements as affected by soil parameters in smelter-contaminated agricultural soils: a statistical modeling approach

An investigation was undertaken to identify the most significant soil parameters that can be used to predict Cd, Pb, and Zn bioaccessibility in smelter-contaminated agricultural soils. A robust model was established from an extended database of soils by using: (i) a training set of 280 samples to select the main soil parameters, to define the best population to be taken into account for the model elaboration, and to construct multivariate regression models, and (ii) a test set of 110 samples to validate the ability of the regression models. Total carbonate, organic matter, sand, P(2)O(5), free Fe-Mn oxide, and pseudototal Al and trace element (TE) contents appeared as the main variables governing TE bioaccessibility. The statistical modeling approach was reasonably successful, indicating that the main soil factors influencing the bioaccessibility of TEs were taken into account and the predictions could be applicable for further risk evaluation in the studied area.     

Kinetic study of γ-hexabromocyclododecane orally given to laying hens (Gallus domesticus)

Introduction  

High concentrations of hexabromocyclododecane (HBCD) sometimes recorded in free-range hens' eggs are thought to be due to soil ingestion. Of the three stereoisomers of HBCD (α-, β-, and γ-HBCD), γ-HBCD is the main component in the commercial mixture, as well as in environmental matrices, whereas the isomer profile is α-dominated in biota. In fish and in mammals, this shift is thought to be due to a rapid elimination of γ-HBCD and to its bioisomerization to the more persistent α-HBCD. The aim of the current controlled study was to better understand the fate of ingested HBCD in laying hens. The isomer profile in soil being γ-dominated, excretion kinetics of γ-HBCD into egg yolk, and accumulation in liver and in abdominal fat were investigated.     

Developmental toxicity of two common corn pesticides to the endangered southern bell frog (Litoria raniformis)

To examine the link between corn agriculture and the observed decline of the endangered southern bell frog (SBF), the effects of two corn crop pesticides on larval growth and development were investigated. Tadpoles were exposed to terbufos sulfone (10 μg/L), a major breakdown product of the insecticide terbufos, and the herbicide atrazine (25 μg/L) individually and as a mixture until the completion of metamorphosis. Atrazine did not interact synergistically with terbufos sulfone or result in significant effects on growth and development alone, although there was some indication of accelerated metamorphosis in the pilot study. Terbufos sulfone alone and as a mixture (terbufos/atrazine) significantly slowed larval development and ultimately delayed metamorphosis. The observed developmental effects from an environmentally relevant concentration of terbufos sulfone indicates a risk posed by this persistent degradation product to the endangered SBF, which breeds and develops in the rice bays adjacent to corn fields treated with pesticides.     

Metal bioaccumulation and metallothionein concentrations in larvae of Crassostrea gigas

Larval stages of bivalve molluscs are highly sensitive to pollutants. Oysters from a hatchery from Normandy (English Channel) were induced to spawn, and fertilized eggs were exposed to copper or cadmium for 24 h. Metal accumulation (from 0.125 to 5 microg Cu L(-1) and from 25 to 200 microg Cd L(-1)) and MT concentrations were measured in larvae. Compared to controls, larvae accumulated copper and cadmium with an increase in MT concentrations particularly with cadmium (i.e. 130.96 ng Cu (mg protein)(-1) and 12.69 microg MT (mg protein)(-1) at 1 microg Cu L(-1) versus 23.19 ng Cu (mg protein)(-1) and 8.92 microg MT (mg protein)(-1) in control larvae; 334.3 ng Cd (mg protein)(-1) and 11.70 microg MT (mg protein)(-1) at 200 microg Cd L(-1) versus 0.87 ng Cd (mg protein)(-1) and 4.60 microg MT (mg protein)(-1) in control larvae). Larvae were also obtained from oysters of a clean area (Arcachon Bay) and a polluted zone (Bidassoa estuary) and exposed to copper in the laboratory, their MT concentration was measured as well as biomarkers of oxidative stress. Biomarker responses and sensitivity to copper for the larvae from Arcachon oysters were higher than for those from Bidassoa.