Extent of pyrolysis impacts on fast pyrolysis biochar properties

A potential concern about the use of fast pyrolysis rather than slow pyrolysis biochars as soil amendments is that they may contain high levels of bioavailable C due to short particle residence times in the reactors, which could reduce the stability of biochar C and cause nutrient immobilization in soils. To investigate this concern, three corn ( L.) stover fast pyrolysis biochars prepared using different reactor conditions were chemically and physically characterized to determine their extent of pyrolysis. These biochars were also incubated in soil to assess their impact on soil CO emissions, nutrient availability, microorganism population growth, and water retention capacity. Elemental analysis and quantitative solid-state C nuclear magnetic resonance spectroscopy showed variation in O functional groups (associated primarily with carbohydrates) and aromatic C, which could be used to define extent of pyrolysis. A 24-wk incubation performed using a sandy soil amended with 0.5 wt% of corn stover biochar showed a small but significant decrease in soil CO emissions and a decrease in the bacteria:fungi ratios with extent of pyrolysis. Relative to the control soil, biochar-amended soils had small increases in CO emissions and extractable nutrients, but similar microorganism populations, extractable NO levels, and water retention capacities. Corn stover amendments, by contrast, significantly increased soil CO emissions and microbial populations, and reduced extractable NO. These results indicate that C in fast pyrolysis biochar is stable in soil environments and will not appreciably contribute to nutrient immobilization.     

Rapid Nitrate Loss from PM10 Filters

The Monterrey Metropolitan Area (MMA) has shown a high concentration of PM_2.5 in its atmosphere since 2003. The contribution of possible sources of primary PM_2.5 and its precursors is not known. In this paper we present the results of analyzing the chemical composition of sixty 24-hr samples of PM_2.5 to determine possible sources of PM_2.5 in the MMA. The samples were collected at the northeast and southeast of the MMA between November 22 and December 12, 2007, using low-volume devices. Teflon and quartz filters were used to collect the samples. The concentrations of 16 airborne trace elements were determined using x-ray fluorescence (XRF). Anions and cations were determined using ion chromatography. Organic carbon (OC) and elemental carbon (EC) were determined by thermal optical analysis. The results show that Ca had the maximum mean concentration of all elements studied, followed by S. Enrichment factors above 50 were calculated for S, Cl, Cu, Zn, Br, and Pb. This indicates that these elements may come from anthropogenic sources. Overall, the major average components of PM_2.5 were OC (41.7%), SO₄ ^2? (22.9%), EC (7.4%), crustal material (11.4%), and NO₃ ^? (12.6%), which altogether accounted for 96% of the mass. Statistically, we did not find any difference in SO₄ ^2? concentrations between the two sites. The fraction of secondary organic carbon was between 24% and 34%. The results of the factor analysis performed over 10 metals and OC and EC show that there are three main sources of PM_2.5: crustal material and vehicle exhaust; industrial activity; and fuel oil burning. The results show that SO₄ ^2?, OC, and crustal material are important components of PM_2.5 in MMA. Further work is necessary to evaluate the proportion of secondary inorganic and organic aerosol in order to have a better understanding of the sources and precursors of aerosols in the MMA.

Implications: The MMA has become one of the most air polluted areas in Mexico. High levels of PM_2.5 have been measured and effective actions need to be taken to reduce air pollution and the associated health risks. Several sources of primary PM_2.5 and precursors of secondary particles exist in the MMA. This study provides valuable information for the local environmental authorities to identify possible sources of primary PM_2.5 and its precursors. The effectiveness of the actions taken to improve air quality will lead to health benefits for the population, reducing their associated costs.     

Nontarget deposition and losses of chlorothalonil in irrigation runoff water from a commercial foliage plant nursery

Commercial foliage plant production requires the use of pesticides for controlling pests and pathogens that can reduce aesthetic qualities of crops, rendering them unwanted by consumers. Chlorothalonil is a common, broad-spectrum, foliar fungicide used for protecting plants from a variety of fungal diseases. This fungicide may also be acutely toxic to nontarget aquatic organisms due to its mode of action. This study evaluated the amount of chlorothalonil deposited on nontarget ground surfaces during normal sprayer applications at a commercial nursery using Teflon targets. One day following application, irrigation runoff events were initiated and runoff water samples were collected and analyzed for chlorothalonil. Discharge volumes were also measured to allow estimation of the total mass of chlorothalonil discharged during each event. Results indicated that 9.8 to 53.6% of the active ingredient applied landed on nontarget ground surfaces depending on plant size, spacing, and row lengths (short rows sprayed from one side vs. longer rows sprayed from both ends). On an entire production-area scale, 29.2% of the active ingredient applied was deposited on ground surfaces. Of the total nontarget deposition, 0.25 to 0.53% was detected in runoff water discharged from the production area. Concentrations ranged from 1.2 to 500 microg/L during the first runoff events following application.     

Applicability of polar organic compound integrative samplers for monitoring pesticides in groundwater

Polar organic chemical integrative samplers (POCISs) for the monitoring of polar pesticides in groundwater were tested on two sites in order to evaluate their applicability by comparison with the spot-sampling approach. This preliminary study shows that, as in surface water, POCIS is a useful tool, especially for the screening of substances at low concentration levels that are not detected by laboratory analysis of spot samples. For quantitative results, a rough estimation is obtained. The challenge is now to define the required water-flow conditions for a relevant quantification of pesticides in groundwater and to establish more representative sampling rates for groundwater.     

Bioavailability of particulate metal to zebra mussels: biodynamic modelling shows that assimilation efficiencies are site-specific

This study investigates the ability of the biodynamic model to predict the trophic bioaccumulation of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) in a freshwater bivalve. Zebra mussels were transplanted to three sites along the Seine River (France) and collected monthly for 11 months. Measurements of the metal body burdens in mussels were compared with the predictions from the biodynamic model. The exchangeable fraction of metal particles did not account for the bioavailability of particulate metals, since it did not capture the differences between sites. The assimilation efficiency (AE) parameter is necessary to take into account biotic factors influencing particulate metal bioavailability. The biodynamic model, applied with AEs from the literature, overestimated the measured concentrations in zebra mussels, the extent of overestimation being site-specific. Therefore, an original methodology was proposed for in situ AE measurements for each site and metal.     

When good neighbors don't need fences: temporal landscape partitioning among baboon social groups

Intraspecific competition is a key factor shaping space-use strategies and movement decisions in many species, yet how and when neighbors utilize shared areas while exhibiting active avoidance of one another is largely unknown. Here, we investigated temporal landscape partitioning in a population of wild baboons (Papio cynocephalus). We used global positioning system (GPS) collars to synchronously record the hourly locations of five baboon social groups for ～900 days, and we used behavioral, demographic, and life history data to measure factors affecting use of overlap areas. Annual home ranges of neighboring groups overlapped substantially, as predicted (baboons are considered non-territorial), but home ranges overlapped less when space use was assessed over shorter time scales. Moreover, neighboring groups were in close spatial proximity to one another on fewer days than predicted by a null model, suggesting an avoidance-based spacing pattern. At all time scales examined (monthly, biweekly, and weekly), time spent in overlap areas was greater during time periods when groups fed on evenly dispersed, low-quality foods. The percent of fertile females in social groups was negatively correlated with time spent in overlap areas only during weekly time intervals. This suggests that broad temporal changes in ecological resources are a major predictor of how intensively overlap areas are used, and groups modify these ecologically driven spacing patterns at short time scales based on female reproductive status. Together, these findings offer insight into the economics of territoriality by highlighting the dynamics of spacing patterns at differing time scales.     

Temperature, salinity and growth rate dependences of Mg/Ca and Sr/Ca ratios of the skeleton of the sea urchin Paracentrotus lividus (Lamarck): an experimental approach

The skeletal Mg/Ca ratio of echinoderms is known to increase with temperature but the relation has never been established in controlled experimental conditions. The present study investigated the effect of temperature, salinity and growth rate on Mg/Ca and Sr/Ca ratios in calcite skeletons of juvenile sea urchins grown in experimental conditions. Mg/Ca ratio was positively related to temperature, increasing until a plateau at high but field occurring temperatures. It was not linked to salinity nor growth rate. We suggest that this plateau is due to properties of the organic matrix of mineralization and recommend to take it into account for the use of Mg/Ca as proxy of seawater Mg/Ca. Skeletal Sr/Ca ratio was mainly dependent on temperature and growth rate, as usually observed in calcite skeletons.     

Floral scents: their roles in nursery pollination mutualisms

Mutualisms are interspecies interactions in which each participant gains net benefits from interacting with its partner. In nursery pollination mutualisms, pollinators reproduce within the inflorescence they pollinate. In these systems, each partner depends directly on the other for its reproduction. Therefore, the signal responsible for partner encounter is crucial in these horizontally transmitted mutualisms, in which the association between specific partners must be renewed at each generation. As in many other interspecies interactions, chemical signals are suspected to be important in the functioning of these mutualisms. We synthesized and compared the published data available on the role of floral scents in the functioning of the 16 known independently evolved nursery pollination mutualisms. So far, attraction of pollinators to their specific hosts has been investigated in only seven of these systems, and the majority of the studies have been conducted on one of them, fig/fig wasp interactions. While such unevenness of the information limits the potential for meta-analysis, some patterns emerge from this review concerning the role of flower volatiles in maintaining the specificity of pollinator attraction, in signaling the appropriate phenological stage for pollinator visit, in attracting the pollinator toward the rewardless sex in dioecious plant species and in aiding the location and exploitation of resources by parasites and predators associated with these mutualisms. Finally, we highlight new perspectives on the evolution of signals in these diversified systems depending on the age and the degree of specificity of the interaction, and on the effect of phylogenetic inertia on the evolutionary dynamics of plant signals.