Elimination of 2-halogenobenzanilides

The elimination of 2-halogenobenzanilides has been studied in the rat, over 75% of the oral dose being excreted in 3 days. The higher the molecular weight of the compound, the more important was the faecal elimination route. No such association was seen for biliary secretion.     

Observations of 2,4,6-trichlorophenol degradation by ozone

The aqueous reactivity of 2,4,6-trichlorophenol (TCP) with ozone has been studied at laboratory-scale using a simple gas bubble/liquid contacting system. Degradation rate constants were measured directly and found to be 7.6 and 77.2 M(-1)s(-1) at pH 2 and 7.5, respectively. At pH 7.5, 10 min of ozonation ( identical with 15 mM ozone consumption) achieved a 90% degradation of TCP, which corresponded to the release of approximately 2 mol Cl(-) per mol TCP. The presence of hydrogen peroxide in solution did not significantly increase the TCP degradation but increased the overall dechlorination to 2.7 mol Cl(-) per mol TCP. The presence of humic acid (HA) in solution was found to enhance the degradation rate of TCP at low relative HA concentrations (<0.6 g/g HA:TCP), but to reduce the rate at higher HA concentrations.     

The future for electrocoagulation as a localised water treatment technology

Electrocoagulation is an electrochemical method of treating polluted water whereby sacrificial anodes corrode to release active coagulant precursors (usually aluminium or iron cations) into solution. Accompanying electrolytic reactions evolve gas (usually as hydrogen bubbles) at the cathode. Electrocoagulation has a long history as a water treatment technology having been employed to remove a wide range of pollutants. However electrocoagulation has never become accepted as a 'mainstream' water treatment technology. The lack of a systematic approach to electrocoagulation reactor design/operation and the issue of electrode reliability (particularly passivation of the electrodes over time) have limited its implementation. However recent technical improvements combined with a growing need for small-scale decentralised water treatment facilities have led to a re-evaluation of electrocoagulation. Starting with a review of electrocoagulation reactor design/operation, this article examines and identifies a conceptual framework for electrocoagulation that focuses on the interactions between electrochemistry, coagulation and flotation. In addition detailed experimental data are provided from a batch reactor system removing suspended solids together with a mathematical analysis based on the 'white water' model for the dissolved air flotation process. Current density is identified as the key operational parameter influencing which pollutant removal mechanism dominates. The conclusion is drawn that electrocoagulation has a future as a decentralised water treatment technology. A conceptual framework is presented for future research directed towards a more mechanistic understanding of the process.     

Experimental determination of sorption in fractured flow systems

Fracture "skins" are alteration zones on fracture surfaces created by a variety of biological, chemical, and physical processes. Skins increase surface area, where sorption occurs, compared to the unaltered rock matrix. This study examines the sorption of organic solutes on altered fracture surfaces in an experimental fracture-flow apparatus. Fracture skins containing abundant metal oxides, clays, and organic material from the Breathitt Formation (Kentucky, USA) were collected in a manner such that skin surface integrity was maintained. The samples were reassembled in the lab in a flow-through apparatus that simulated approximately 2.7 m of a linear fracture "conduit." A dual-tracer injection scheme was utilized with the sorbing or reactive tracer compared to a non-reactive tracer (chloride) injected simultaneously. Sorption was assessed from the ratio of the first temporal moments of the breakthrough curves and from the loss of reactive tracer mass and evaluated as a function of flow velocity and solute type. The breakthrough curves suggest dual-flow regimes in the fracture with both sorbing and non-sorbing flow fields. Significant sorption occurs for the reactive components, and sorption increased with decreasing flow rate and decreasing compound solubility. Based on moment analysis, however, there was little retardation of the center of solute mass. These data suggest that non-equilibrium sorption processes dominate and that slow desorption and boundary layer diffusion cause extensive tailing in the breakthrough curves.     

Photodechlorination of polychlorinated biphenyls in the presence of hydroquinone in aqueous alcoholic media

On exposure to sunlight or photolysis at λ >300nm, the dechlorination of a polychlorinated biphenyl mixture (Aroclor 1254) in the H donor alcohol 2-propanol under neutral conditions is enhanced by the presence of the photosensitizer hydroquinone. Dechlorination is strongly promoted by an increasingly aqueous solvent (1:1 water:alcohol) and by maintaining neutral conditions (pH 7.0 buffer) both in the presence and absence of sensitizer. Atmospheric oxygen (continuous aeration) retards the hydroquinone induced dechlorination less than the direct photolysis process.     

Comparison of vehicle exhaust emissions from modified diesel fuels

Three diesel fuels, one oil sand-derived (OSD) diesel serving as base fuel, one cetane-enhanced base fuel, and one oxygenate [diethylene glycol dimethyl ether (DEDM)]-blended base fuel, were tested for their emission characterizations in vehicle exhaust on a light-duty diesel truck that reflects the engine technology of the 1994 North American standard. Both the cetane-enhanced and the oxygenate-blended fuels were able to reduce regulated [CO, particulate matter (PM), total hydrocarbon (THC)] and nonregulated [polyaromatic hydrocarbons (PAHs), carbonyls, and other volatile organic chemicals] emissions, except for nitrogen oxides (NO(x)), compared with the base fuel. Although burning a fuel that contains oxygen could conceivably yield more oxygenated compounds in emissions, the oxygenate-blended diesel fuel resulted in reduced emissions of formaldehyde along with hydrocarbons such as benzene, 1,3-butadiene, and PAHs. Reductions in nitro-PAH emissions have been observed in both the cetane-enhanced and oxygenated fuels. This further demonstrates the benefits of using a cetane enhancer and the oxygenated fuel component.     

Considering science needs to deliver actionable science

Conservation practitioners, natural resource managers, and environmental stewards often seek out scientific contributions to inform decision-making. This body of science only becomes actionable when motivated by decision makers considering alternative courses of action. Many in the science community equate addressing stakeholder science needs with delivering actionable science. However, not all efforts to address science needs deliver actionable science, suggesting that the synonymous use of these two constructs (delivering actionable science and addressing science needs) is not trivial. This can be the case when such needs are conveyed by people who neglect decision makers responsible for articulating a priority management concern and for specifying how the anticipated scientific information will aid the decision-making process. We argue that the actors responsible for articulating these science needs and the process used to identify them are decisive factors in the ability to deliver actionable science, stressing the importance of examining the provenance and the determination of science needs. Guided by a desire to enhance communication and cross-literacy between scientists and decision makers, we identified categories of actors who may inappropriately declare science needs (e.g., applied scientists with and without regulatory affiliation, external influencers, reluctant decision makers, agents in place of decision makers, and boundary organization representatives). We also emphasize the importance of, and general approach to, undertaking needs assessments or gap analyses as a means to identify priority science needs. We conclude that basic stipulations to legitimize actionable science, such as the declaration of decisions of interest that motivate science needs and using a robust process to identify priority information gaps, are not always satisfied and require verification. To alleviate these shortcomings, we formulated practical suggestions for consideration by applied scientists, decision makers, research funding entities, and boundary organizations to help foster conditions that lead to science output being truly actionable.     

Work–family conflicts of women in the Air Force: their influence on mental health and functioning

This paper examined the effects of work and family stressors and conflicts on Air Force women's mental health and functioning. We analyzed data from a 1993 survey of representative stratified samples of 525 Air Force women from the active duty reserve and guard forces. The analyses of the data are guided by the comprehensive model of work–family conflict that has been tested by Frone, Russell, and Cooper (1992) using a large representative community sample. Structural equation modeling analyses provided support for the work–family conflict model. The analyses also provided support for an extension of the model, which included the separate effects of marital and parental roles on mental health. The extended model demonstrated that job and parental stresses had direct effects on work–family conflicts and that job and marital distress and family–work conflict had an independent adverse effect on mental health. Whereas job and parental involvement had a beneficial effect on distress, they had an adverse effect on work–family conflicts. Copyright © 1999 John Wiley & Sons, Ltd.     

Alarming decline of freshwater trigger species in western Mediterranean key biodiversity areas

Theidentification of key biodiversity areas (KBA) was initiated by the International Union for Conservation of Nature in 2004 to overcome taxonomic biases in the selection of important areas for conservation, including freshwater ecosystems. Since then, several KBAs have been identified mainly based on the presence of trigger species (i.e., species that trigger either the vulnerability and or the irreplaceability criterion and thus identify a site as a KBA). However, to our knowledge, many of these KBAs have not been validated. Therefore, classical surveys of the taxa used to identify freshwater KBAs (fishes, molluscs, odonates, and aquatic plants) were conducted in Douro (Iberian Peninsula) and Sebou (Morocco) River basins in the Mediterranean Biodiversity Hotspot. Environmental DNA analyses were undertaken in the Moroccan KBAs. There was a mismatch between the supposed and actual presence of trigger species. None of the trigger species were found in 43% and 50% of all KBAs surveyed in the Douro and Sebou basins, respectively. Shortcomings of freshwater KBA identification relate to flawed or lack of distribution data for trigger species. This situation results from a misleading initial identification of KBAs based on poor (or even inaccurate) ecological information or due to increased human disturbance between initial KBA identification and the present. To improve identification of future freshwater KBAs, we suggest selecting trigger species with a more conservative approach; use of local expert knowledge and digital data (to assess habitat quality, species distribution, and potential threats); consideration of the subcatchment when delineating KBAs boundaries; thoughtful consideration of terrestrial special areas for conservation limits; and periodic field validation.