The potential for adoption of climate smart agricultural practices in Sub-Saharan livestock systems

Livestock systems play an important role in the livelihoods of many rural communities in Sub-Saharan Africa while being responsible for an important share of human-induced greenhouse gas emissions. This study aimed to evaluate the potential for adoption of climate smart agricultural practices in Sub-Saharan livestock systems, related to the improvement in feed, animal husbandry, and grassland management. These practices present productivity and mitigation benefits and in some cases may also contribute to enhance resilience. In this study, we used a data set of 1538 farm households across nine Sub-Saharan countries. A mixed logit model was used to assess the influence on adoption and to estimate the probability of adoption. Our results show that there seems to be stronger influence of physical and financial capitals on adoption than the other capitals. Different types of capitals influence the uptake of different agricultural practices. Yet the probability of adoption would change across countries. The results of this study could help to refine adoption estimates calculated through global or regional modelling approaches and to inform the design of policies to better target investments in order to foster adoption.     

Distribution coefficients of potentially toxic elements in soils from the eastern Amazon

The solid-solution distribution or partition coefficient (Kd) is a measure of affinity of potentially toxic elements (PTE) for soil colloids. Kd plays a key role in several models for defining PTE guideline values in soils and for assessing environmental risks, and its value depends on edaphic and climatic conditions of the sites where the soils occur. This study quantified Kd values for Cd, Co, Cr, Cu, Hg, Ni, Pb, and Zn from representative soil samples from Brazil’s eastern Amazon region, which measures 1.2 million km². The Kd values obtained were lower than those set by both international and Brazilian environmental agencies and were correlated with the pH, Fe and Mn oxide content, and cationic exchange capacity of the soils. The following order of decreasing affinity was observed: Pb?>?Cu?>?Hg?>?Cr?>?Cd?≈?Co?>?Ni?>?Zn.     

Environmental monitoring of water resources around a municipal landfill of the Rio Grande do Sul state,Brazil

Environmental Science and Pollution Research - In Brazil, landfills are commonly used as a method for the final disposal of waste that is compliant with the legislation. This technique, however,...     

The NAMEA as Validation Instrument for Environmental Macroeconomics

This paper shows how environmental issues can be incorporated into macroeconomic accounting and analysis by the construction and use of a National Accounting Matrix including Environmental Accounts (NAMEA). The paper firstly elaborates on a number of conceptual issues on the harmonisation of environmental statistics and the national accounts. Specific attention is given to the consistent allocation of pollution to production and consumption activities and the importance of aggregated environmental indicators. Further, various applications are presented which vary from simple comparisons of macroeconomic performance indicators for economy and environment to more comprehensive modelling exercises. The paper does not only review recent experiences in the Netherlands but also those from other countries.     

Effect of impeller type and agitation on the performance of pilot scale ASBR and AnSBBR applied to sanitary wastewater treatment

The objective of this work was to assess the effect of agitation rate and impeller type in two mechanically stirred sequencing batch reactors: one containing granulated biomass (denominated ASBR) and the other immobilized biomass on polyurethane foam (denominated AnSBBR). Each configuration, with total volume of 1 m³, treated 0.65 m³ sanitary wastewater at ambient temperature in 8-h cycles. Three impeller types were assessed for each reactor configuration: flat-blade turbine impeller, 45°-inclined-blade turbine impeller and helix impeller, as well as two agitation rates: 40 and 80 rpm, resulting in a combination of six experimental conditions. In addition, the ASBR was also operated at 20 rpm with a flat-blade turbine impeller and the AnSBBR was operated with a draft tube and helix impeller at 80 and 120 rpm. To quantify how impeller type and agitation rate relate to substrate consumption rate, results obtained during monitoring at the end of the cycle, as well as the time profiles during a cycle were analyzed. Increasing agitation rate from 40 rpm to 80 rpm in the AnSBBR improved substrate consumption rate whereas in the ASBR this increase destabilized the system, likely due to granule rupture caused by the higher agitation. The AnSBBR showed highest solids and substrate removal, highest kinetic constant and highest alkalinity production when using a helix impeller, 80 rpm, and no draft tube. The best condition for the ASBR was achieved with a flat-blade turbine impeller at 20 rpm. The presence of the draft tube in the AnSBBR did not show significant improvement in reactor efficiency. Furthermore, power consumption studies in these pilot scale reactors showed that power transfer required to improve mass transfer might be technically and economically feasible.     

Metal extractability patterns to evaluate (potentially) mobile fractions in periurban calcareous agricultural soils in the Mediterranean area—analytical and mineralogical approaches

A set of periurban calcareous agricultural Mediterranean soils was spiked with a mixture of Cd, Cu, Pb and Zn at two levels within the limit values proposed by current European legislation, incubated for up to 12 months, and subjected to various one-step extraction procedures to estimate mobile (neutral salts) and potentially mobile metal fractions (complexing and acidic extraction methods). The results obtained were used to study metal extractability patterns according to the soil characteristics. The analytical data were coupled with mineralogical investigations and speciation modelling using the Visual Minteq model. The formation of soluble metal-complexes in the complexing extracts (predicted by the Visual Minteq calculations) led to the highest extraction efficiency with complexing extractants. Metal extractability patterns were related to both content and composition of carbonate, organic matter, Fe oxide and clay fractions. Potentially mobile metal fractions were mainly affected by the finest soil fractions (recalcitrant organic matter, active lime and clay minerals). In the case of Pb, scarce correlations between extractable Pb and soil constituents were obtained which was attributed to high Pb retention due to the formation of 4PbCO₃·3PbO (corroborated by X-ray diffraction). In summary, the high metal proportion extracted with complexing agents highlighted the high but finite capacity to store potentially mobilizable metals and the possible vulnerability of these soils against environmental impact from metal accumulation.     

Study of the solubility and stability of polystyrene wastes in a dissolution recycling process

Dissolution with suitable solvents is one of the cheapest and more efficient processes for polystyrene waste management. In this work the solubility of polystyrene foams in several solvents benzene, toluene, xylene, tetrahydrofuran, chloroform, 1,3-butanediol, 2-butanol, linalool, geraniol, d-limonene, p-cymene, terpinene, phellandrene, terpineol, menthol, eucalyptol, cinnamaldheyde, nitrobenzene, N,N-dimethylformamide and water has been determined.Experimental results have shown that to develop a “green process” the constituents of essential oils, d-limonene, p-cymene, terpinene, phellandrene, are the most appropriate solvents. The action of these solvent does not produce any degradation of polymer chains. The solubility of the polymer in the mentioned solvents at different temperatures has been investigated. The solvent can be easily recycled by distillation.     

Progress on including CCS projects in the CDM: Insights on increased awareness,market potential and baseline methodologies

The inclusion of CO₂ capture and storage (CCS) in the Kyoto Protocol's Clean Development Mechanism (CDM) is still subject to controversy and discussion. A myriad of barriers prevents CCS in the CDM. Apart from political barriers, economic, social and procedural barriers play a role. This paper discusses relevant new results on the human capacity, procedural feasibility and economic potential of CCS in the CDM. The conclusions of a capacity building effort in Africa show that awareness and knowledge are low but that capacity building efforts are well received. A reality check on methodologies for hypothetical CCS projects shows that most of the issues can be resolved, and the CDM institutional arrangements can accommodate CCS. A bottom-up estimate of the potential of natural gas processing CCS in the CDM, based on a previously proprietary database from the oil and gas industry, suggests that there is an annual potential of about 174 MtCO₂ in 2020 in that sector. Most of that potential can be realized at CER prices between $20 and $30/tCO₂ but there is no sign of flooding the CDM market with cheap credits from CCS projects. Despite these results and more open information, the CCS and CDM debate, progress in the negotiations on CCS in the CDM is slow and there is no clear view on a solution.