印刷环节挥发性有机物无组织排放特征测定研究

对使用溶剂型油墨的凹版印刷设备和使用水性油墨的柔版印刷设备无组织排放的挥发性有机物(VOCs)浓度进行了实际监测,并采用计算流体动力学模拟无组织排放VOCs的收集效率。结果表明：(1)使用溶剂型油墨的凹版连续印刷过程非甲烷总烃(NMHC)最高均值达到5 975.67 mg/m³,约为使用水性油墨的柔版印刷(191.67 mg/m³)的31.2倍。虽然使用水性油墨可明显降低NMHC的排放,但其操作空间的浓度依然存在超过《工作场所有害因素职业接触限值第1部分：化学有害因素》(GBZ 2.1—2019)的现象。(2)印刷车间应该设置专门的调墨室,能缓解印刷车间内挥发性污染气体浓度的波动。(3)计算流体动力学模拟显示,设置合理的集气罩可有效降低VOCs的无组织排放,收集效率为70%～75%。     

基于Access的海原特大地震黄土地震滑坡数据库的构建

自2016年以来,防灾科技学院对1920年海原特大地震形成的黄土地震滑坡开展了全面系统的野外调查工作,获取了数百个黄土地震滑坡的详细调查资料,为便于资料的管理和应用,建立了首个海原特大地震黄土地震滑坡数据库系统.主要从资料来源、access 2019软件系统的可行性、数据库的设计及建设4个方面详细介绍了海原特大地震黄土...     

燃油锅炉烟气尿素法同时脱硫脱氮技术

针对2th燃油锅炉烟气,采用尿素添加剂湿法同时脱硫脱氮技术进行治理。通过工程应用试验,确定工程运行时液气比为3Lm3,吸收剂尿素浓度为5%,添加剂浓度随其种类不同而不同。工程环保验收各指标均优于当地标准。     

Waste landfill plant and waste disposal plant efficiencies in China

Journal of Material Cycles and Waste Management - As resident awareness of environmental issues has grown, waste disposal has become an important part of urban environmental governance. Most...     

临安区不同功能区道路降雨径流重金属污染特征及源解析

于2017—2018年对临安区不同功能区的道路进行道路降雨径流采样,分析降雨量、季节变化和街尘对临安区道路降雨径流重金属污染特征的影响,并运用主成分分析法进行重金属源解析。结果表明,临安区道路降雨径流污染较严重;降雨强度越大,重金属浓度下降更快且末期浓度更低;道路降雨径流中Cu呈现春夏季大于秋冬季,Zn、Cr呈现秋冬季大于春夏季,Pb、Ni呈现冬春季大于夏秋季的季节变化趋势;临安区街尘与道路降雨径流重金属污染存在一定的相关性;主成分分析表明重金属污染源主要为以电线电缆为主的工业活动和汽车损耗。     

污泥含炭吸附剂对挥发性有机废气吸附实验研究

研究了污泥含炭吸附剂对挥发性有机污染物的吸附特性。结果表明,污泥含炭吸附剂对苯系物的吸附为典型的物理吸附,其吸附甲苯等温线的类型系优惠型吸附等温线,表明具有良好的吸附能力;在吸附反应温度为20℃,气体流量为500 mL/m in(停留时间为0.424 s),甲苯浓度为2 700 mg/m3时,甲苯的饱和吸附容量为150.0 mg/g;同时,研究表明污泥含炭吸附剂对苯系物的饱和吸附容量和吸附强弱次序为二甲苯甲苯苯。结果表明污泥含炭吸附剂适合对中低浓度有机废气的吸附净化。     

Perennial filter strips reduce nitrate levels in soil and shallow groundwater after grassland-to-cropland conversion

Many croplands planted to perennial grasses under the Conservation Reserve Program are being returned to crop production, and with potential consequences for water quality. The objective of this study was to quantify the impact of grassland-to-cropland conversion on nitrate-nitrogen (NO3-N) concentrations in soil and shallow groundwater and to assess the potential for perennial filter strips (PFS) to mitigate increases in NO3-N levels. The study, conducted at the Neal Smith National Wildlife Refuge (NSNWR) in central Iowa, consisted of a balanced incomplete block design with 12 watersheds and four watershed-scale treatments having different proportions and topographic positions of PFS planted in native prairie grasses: 100% rowcrop, 10% PFS (toeslope position), 10% PFS (distributed on toe and as contour strips), and 20 PFS (distributed on toe and as contour strips). All treatments were established in fall 2006 on watersheds that were under bromegrass (Bromus L.) cover for at least 10 yr. Nonperennial areas were maintained under a no-till 2-yr corn (Zea mays L.)--soybean [Glycine max. (L.) Merr.] rotation since spring 2007. Suction lysimeter and shallow groundwater wells located at upslope and toeslope positions were sampled monthly during the growing season to determine NO3-N concentration from 2005 to 2008. The results indicated significant increases in NO3-N concentration in soil and groundwater following grassland-to-cropland conversion. Nitrate-nitrogen levels in the vadose zone and groundwater under PFS were lower compared with 100% cropland, with the most significant differences occurring at the toeslope position. During the years following conversion, PFS mitigated increases in subsurface nitrate, but long-term monitoring is needed to observe and understand the full response to land-use conversion.     

燃煤烟气低温SCR脱硝中试研究

低温选择性催化还原(SCR)脱硝是国内外脱硝技术研发的热点,但目前主要集中在实验室小试范围,无法完全反映催化剂在实际烟气中的运行状况。在30 t/h循环流化床燃煤锅炉脱硫除尘装置后建设了2 000~5 000 m3/h的SCR脱硝中试装置,经系统研究发现,中试使用的蜂窝式催化剂对SO2和NO具有很强的吸附能力,且反应温度、喷氨速率和气体空速均会影响催化脱硝效率。为期5 d的连续运行实验结果表明,催化剂的脱硝效率一直稳定在30%~50%,并未发现明显的失活,这证明设计除雾除尘器、较大的混合器、混合器与反应器间较长的管路均有利于缓解催化剂因SO2、H2O和飞灰中的碱性金属导致的失活。     

Physicochemical and biological quality of soil in hexavalent chromium-contaminated soils as affected by chemical and microbial remediation

Chemical and microbial methods are the main remediation technologies for chromium-contaminated soil. These technologies have progressed rapidly in recent years; however, there is still a lack of methods for evaluating the chemical and biological quality of soil after different remediation technologies have been applied. In this paper, microbial remediation with indigenous bacteria and chemical remediation with ferrous sulphate were used for the remediation of soils contaminated with Cr(VI) at two levels (80 and 1,276 mg kg^?1) through a column leaching experiment. After microbial remediation with indigenous bacteria, the average concentration of water-soluble Cr(VI) in the soils was reduced to less than 5.0 mg kg^?1. Soil quality was evaluated based on 11 soil properties and the fuzzy comprehensive assessment method, including fuzzy mathematics and correlative analysis. The chemical fertility quality index was improved by one grade using microbial remediation with indigenous bacteria, and the biological fertility quality index increased by at least a factor of 6. Chemical remediation with ferrous sulphate, however, resulted in lower levels of available phosphorus, dehydrogenase, catalase and polyphenol oxidase. The result showed that microbial remediation with indigenous bacteria was more effective for remedying Cr(VI)-contaminated soils with high pH value than chemical remediation with ferrous sulphate. In addition, the fuzzy comprehensive evaluation method was proven to be a useful tool for monitoring the quality change in chromium-contaminated soils.     

Some technical issues in managing PCBs

Polychlorinated biphenyls (PCBs) were important industrial chemicals featuring high thermal and chemical stability and low flammability. They were widely used as dielectric and thermal fluid in closed electro-technical applications (transformers, capacitors…) and also in numerous dispersive uses, ranking from auto-copying paper to sealant or coatings. During the 1960s, severe environmental consequences started becoming apparent. The stability of PCBs contributed to their persistence in the environment, their lipophilic character to bio-magnification. Fish-eating species seemed threatened in their existence. In Japan and in Taiwan, thousands of people consumed PCB-contaminated oil. The production of PCBs stopped completely during the 1980s. Usage could continue in closed applications only. In this paper, particular attention is given to two issues: the cleaning of PCB electric transformers and the potential impact of PCB-containing building materials. Other contributions will cover the management and treatment of PCB-contaminated soil, sludge or fly ash. The complete survey is being prepared by request of the Knowledge Center for Engineers and Professionals.