Inherent risk assessment—A new concept to evaluate risk in preliminary design stage

Quantitative Risk Assessment (QRA) has been a very popular and useful methodology which is widely accepted by the industry over the past few decades. QRA is typically carried out at a stage where complete plant has been designed and sited. At that time, the opportunity to include inherent safety design features is limited and may incur higher cost. This paper proposes a new concept to evaluate risk inherent to a process owing to the chemical it uses and the process conditions. The risk assessment tool is integrated with process design simulator (HYSYS) to provide necessary process data as early as the initial design stages, where modifications based on inherent safety principles can still be incorporated to enhance the process safety of the plant. The risk assessment tool consists of two components which calculate the probability and the consequences relating to possible risk due to major accidents. A case study on the potential explosion due to the release of flammable material demonstrates that the tool is capable to identify potential high risk of process streams. Further improvement of the process design is possible by applying inherent safety principles to make the process under consideration inherently safer. Since this tool is fully integrated with HYSYS, re-evaluation of the inherent risk takes very little time and effort. The new tool addresses the lack of systematic methodology and technology, which is one of the barriers to designing inherently safer plants.     

Carbon content of common airborne fungal species and fungal contribution to aerosol organic carbon in a subtropical city

Interest in the role and contribution of fungi to atmospheric aerosols and processes grows in the past decade. Substantial data or information such as fungal mass or carbon loading to ambient aerosols is however still lacking. This study aimed to quantify the specific organic carbon content (OC per spore) of eleven fungal species commonly found airborne in the subtropics, and estimated their contribution to organic carbon in aerosols. The specific OC contents showed a size-dependent relationship (r = 0.64, p < 0.05) and ranged from 3.6 to 201.0 pg carbon per spore or yeast cell, giving an average of 6.0 pg carbon per spore (RSD 51%) for spore or cell size less than 10 μm. In accounting for natural variations in the composition and abundance of fungal population, weighted-average carbon content for field samples was adopted using the laboratory determined specific OC values. An average of 5.97 pg carbon per spore (RSD 3.8%) was enumerated from 28 field samples collected at the university campus. The mean fungal OC concentration was 3.7, 6.0 and 9.7 ng m^?3 in PM_2.5, PM_2.5–10 and PM₁₀, respectively. These corresponded to 0.1%, 1.2% and 0.2% of the total OC in PM_2.5, PM_2.5–10 and PM₁₀, respectively. In the study period, rain provided periods with low total OC but high fungal prevalence and fungi contributed 7–32% OC in PM_2.5–10 or 2.4–7.1% OC in PM₁₀. More extensive studies are deserved to better understand the spatial-, temporal- and episodic dependency on the fungal OC contribution to the atmospheric aerosols.     

Nutrients and nonessential elements in soil after 11 years of wastewater irrigation

Irrigation of citrus (Citrus aurantium L. × Citrus paradise Macf.) with urban reclaimed wastewater (RWW) can be economical and conserve fresh water. However, concerns remain regarding its deleterious effects on soil quality. We investigated the ionic speciation (ISP) of RWW and potential impacts of 11 yr of irrigation with RWW on soil quality, compared with well-water (WW) irrigation. Most of nutrients (～53-99%) in RWW are free ionic species and readily available for plant uptake, such as: NH(4+), NO(3-), K(+), Ca(2+), Mg(2+), SO(4)(2-), H(3)BO(3), Cl(-), Fe(2+), Mn(2+), Zn(2+), Co(2+), and Ni(2+), whereas more than about 80% of Cu, Cr, Pb, and Al are complexed with CO(3-), OH(-), and/or organic matter. The RWW irrigation increased the availability and total concentrations of nutrients and nonessential elements, and soil salinity and sodicity by two to three times compared with WW-irrigated soils. Although RWW irrigation changed many soil parameters, no difference in citrus yield was observed. The risk of negative impacts from RWW irrigation on soil quality appears to be minimal because of: (i) adequate quality of RWW, according to USEPA limits; (ii) low concentrations of metals in soil after 11 yr of irrigation with RWW; and (iii) rapid leaching of salts in RWW-irrigated soil during the rainy season.     

Functional gene expression of oil-degrading bacteria resistant to hexadecane toxicity

Contamination with oil poses a threat to the environment and to human health worldwide. Biological methodologies have proved to be economical, versatile and efficient for the remediation of pollutants. In this paper, a highly efficient oil-degrading bacterial strain USTB-2 was isolated from an oil production well of Dagang oil field in Tianjin, China. The 16S rRNA sequence of USTB-2 showed 100% similarity with that of Bacillus subtilis BSn5. Hexadecane is one of the most important components in petroleum. The half inhibitory ratio (IC₅₀) of hexadecane inhibited organisms, determined by microcalorimetry, was lower in USTB-2 than in B. BSn5. The results indicate that the strain USTB-2 degrades hexadecane to make it less toxic compared with the normal strain. RT-PCR was used to evaluate the expression of oil-degrading enzymes, specifically 4-hydroxyphenylacetate 3-monooxygenase genes (HPMO). A sharp increase in the expression of HPMO genes was observed for USTB-2, while the expression of HPMO genes in reference strain B. BSn5 remained relatively stable. These methods can be used to study the metabolic potential of microorganisms for in situ oil decontamination.     

Gasification characteristics of sewage sludge combined with wood biomass

The gas products from gasification processes have been considered to have some limitations in gas composition and heating value from the previous studies. Gasification characteristics of sewage sludge and wood mixture were investigated using different mixing ratios with the purpose of better quality of gas product suitable for energy/power generation. The gasification experiment was performed by an indirectly heated fluidized bed reactor. As reaction temperature increased from 600 to 900 °C, the yield of gas product increased with higher generation of CO, H₂ and CH₄ by more activated gas conversion reactions. As the equivalence ratio increased from 0.2 to 0.4, composition ratio of CO₂ increased while CO, CH₄, H₂ decreased as expected. Several operating variables including mixing ratio of wood with dried sludge were also tested. From this initial stage of experiment, optimal operating conditions for the bubbling fluidized bed gasifier, could be considered 900 °C in temperature; 0.2 in equivalence ratio and 40 % in wood mixing ratio within test variables range. These results will be more thoroughly investigated for the application to the larger scale pilot system.     

Recycling of iron and silicon from drinking water treatment sludge for synthesis of magnetic iron oxide@SiO<Subscript>2</Subscript> composites

More attention has been paid to the deterioration of water bodies polluted by drinking water treatment sludge (DWTS) in recent years. It is important to develop methods to effectively treat DWTS by avoiding secondary pollution. We report herein a novel investigation for recovery of Si and Fe from DWTS, which are used for the synthesis of two iron oxide@SiO₂ composites for adsorption of reactive red X-3B (RRX-3B) and NaNO₂. The results show that Fe³⁺ (acid-leaching) and Si⁴⁺ (basic-leaching) can be successfully recovered from roasted DWTS. Whether to dissolve Fe(OH)₃ precipitation is the key point for obtaining Fe₃O₄ or γ-Fe₂O₃ particles using the solvothermal method. The magnetic characteristics of Fe₃O₄@SiO₂ (390.0 m² g^?1) or Fe₂O₃@SiO₂ (220.9 m² g^?1) are slightly influenced by the coated porous SiO₂ layer. Peaks of Fe–O stretching vibration (580 cm^?1) and asymmetric Si–O–Si stretching vibrations (1080 cm^?1) of Fe₃O₄@SiO₂ indicate the successful coating of a thin silica layer (20–150 nm). The adsorption capacity of RRX-3B and NaNO₂ by Fe₃O₄@SiO₂ is better than that of Fe₂O₃@SiO₂, and both composites can be recycled through an external magnetic field. This method is an efficient and environmentally friendly method for recycling DWTS.     

A High-Volume Sampler for the Determination of Particle Size Distributions in Ambient Air

A size selective particle sampler has been developed for continuous sampling of the urban aerosol over periods ranging from hours to weeks, providing relatively large sample weights. The system, which is now operating in New York City, uses a parallel array of two-stage samplers. The cyclones used as the first stage collectors have 50% particle retention at 3.5,2.5,1.5 and 0.5 µm aerodynamic diameter, respectively. Undersize particles which pass through the cyclones are captured on glass fiber filters. Equal intake velocities are assured by using flow equalizers on the inlets to the cyclones. Accurate control of the flow through the cyclones is obtained by the use of an integrated circuit pressure transducer in conjunction with a specially designed feedback control circuit. The collection efficiencies of the cyclone were calibrated using monodisperse ferric oxide test aerosols tagged with Tc-99m. Mass balances of the par-ticulates collected on the cyclones and filters are obtained for the five sampling stages. Preliminary results show the distributions of the total suspended particulates in New York City to be bimodal. The distributions of lead, copper, and manganese with particle size are also discussed.     

Site Representativeness of Urban Air Monitoring Stations

Abstract

This paper describes a statistic to quantify spatial representativeness for the air measurements of an urban fixed-site ambient air monitoring station. The application of such a statistic of representativeness has also been successfully demonstrated by two data sets collected at the Gu-Ting monitoring station in Taipei. By measuring NO2 at 22 sites simultaneously around the Gu-Ting station, the statistic has characterized different degrees of spatial representativeness for nitrogen dioxide (NO2) at various areas and microenvironments surrounding this fixed-site monitoring station. By measuring ambient air concentrations at six sites sequentially around the Gu-Ting station, the statistic has also characterized different degrees of representativeness for particulates less than 10 urn in size—(PM10), carbon monoxide (CO), sulfur dioxide (SO2), ozone (O3), NO2, nitrogen oxides (NOX), nitrogen monoxide (NO), total hydrocarbons (THC), and nonmethane hydrocarbons (NMHQ—at an open area surrounding this fixed-site monitoring station. This statistical method identifies the Gu-Ting station is well representative of outdoor concentrations of all nine air pollutants for a period of three weeks at the areas within a 700 m radius around this station. The indoor NO2 concentrations, however, are not represented by the measurements at the fixed-site monitoring station.     

Characterization of Carbonaceous Species of Ambient PM2.5 in Beijing,China

Abstract

One-week integrated fine particulate matter (i.e., particles <2.5 μm in diameter; PM_2.5) samples were collected continuously with a low-flow rate sampler at a downtown site (Chegongzhuang) and a residential site (Tsinghua University) in Beijing between July 1999 and June 2000. The annual average concentrations of organic carbon (OC) and elemental carbon (EC) at the urban site were 23.9 and 8.8 μg m^?3, much higher than those in some cities with serious air pollution. Similar weekly variations of OC and EC concentrations were found for the two sampling sites with higher concentrations in the winter and autumn. The highest weekly variations of OC and EC occurred in the winter, suggesting that combustion sources for space heating were important contributors to carbonaceous particles, along with a significant impact from variable meteorological conditions. High emissions coupled with unfavorable meteorological conditions led to the max weekly carbonaceous concentration the week of November 18–25, 1999. The weekly mass ratios of OC:EC ranged between 2 and 4 for most samples and averaged 2.9, probably suggesting that secondary OC (SOC) is present most weeks. The range of contemporary carbon fraction, based on the C14 analyses of eight samples collected in 2001, is 0.330–0.479. Estimated SOC accounted for ～38% of the total OC at the two sites. Average OC and EC concentrations at Tsinghua University were 25% and 18%, respectively, higher than those at Chegongzhuang, which could be attributed to different local emissions of primary carbonaceous particles and gaseous precursors of SOC, as well as different summer photochemical intensities between the two locations.