Transmissometer Measurement of Participate Emissions from a Jet Engine Test Facility

The body of information presented in this paper is directed toward those individuals involved with handling hazardous materials, whether in actual use of such chemicals, or in monitoring atmospheric emissions. Although specifically relating experience in the design and testing of phosgene emission control equipment, it attempts to establish general guidelines for effectively dealing with emissions of hazardous materials. An approach for handling chemical pollutants having no established air quality emission standards is developed. The paper presents a technique for establishing process emissions at acceptably low levels to insure the health and safety of the general population as well as that of the process workers themselves. Methods, suitable for measuring phosgene at these low levels, have been investigated, and problems associated with such an investigation are discussed. While complete theoretical scrubber design criteria are beyond the scope of this paper, many of the "real world" problems which affected scrubber performance are presented. Finally, the practical aspects of process emissions control are illustrated by actual results from the system test.     

Testing and Commercialization of Byproduct Dibasic cids as Buffer Additives for Limestone Flue Gas esulfurization Systems

Pilot plant (0.1 MW) tests and utility boiler full scale demonstration (194 MW) of byproduct organic dibasic acids (DBA) as buffer additives to limestone scrubbers have shown performance improvements equivalent to those achieved by the addition of pure adipic acid. Both SO₂ removal efficiency and limestone utilization increased, and no significant operating problems were observed with three of the four DBA tested. Chemical and biological evaluations of scrubber samples taken during the DBA testing indicated no detectable tOxicity or mutagenicity, and no significant environmental impact is expected as a result of DBA addition. Economic estimates indicate that substitution of DBA for pure adipic acid as a buffer additive will result in additive cost savings of 30 % or greater.     

Trends and Relationships of O3, NOx and HC in the South Coast Air Basin of California

A basin-wide air quality trend analysis for the South Coast Air Basin of California is conducted for hydrocarbons (HC), NO_x, O₃ and CO using multi-station composite daily maximum-hour average ambient concentrations for the third quarter (July, August and September) from 1968 to 1985. Emissions and air quality trends are compared for the period 1968-1984. Ambient HC and NOX trends are somewhat different from estimated emission trends of HC and NO_x, while a definite, downward trend of ambient CO is consistent with vehicular emission control measures. Basin-wide ambient HC, NO_x and O₃ appear to show downward trends for the period 1970-1985, but because of high fluctuations it is difficult to delineate trends for shorter periods. The meteorology (850 mb temperature)-adjusted O₃ shows a more consistent downward trend than does unadjusted O₃. Polynomial and multiplicative regression models for basin-wide empirical O₃-HC-NO_x relationships Indicate that the O₃ variation is explained largely by the meteorological variable (850 mb temperature) although model estimations are improved by adding HC and NO_x concentration terms.     

The Potential of Pulse-Jet Baghouses for Utility Boilers. Part 2: Performance of Pulse-Jet Fabric Filter Pilot Plants

Pulse-jet fabric filters (PJFFs) are widely used in U.S. industrial boiler applications and in utility and industrial boilers abroad. Their small size and reduced cost relative to more conventional reverse-gas baghouses makes the use of PJFFs appear to be an attractive particulate control option for utility boilers. This paper (Part 2 of a three-part series) summarizes the results of pilot PJFF studies sponsored by the Electric Power Research Institute at different utility sites in the United States. The purpose of these tests is to evaluate PJFF performance for U.S. fossil-fuel-fired applications. These data are also used to corroborate the results of a recent worldwide survey of PJFF user experience, as described in Part 1 of this series. Part 3 will provide a cost comparison of PJFFs to other particulate control options such as electrostatic precipitators and reverse-gas baghouses.     

Calculation Of Electric Field Strength Distributions For New Electrostatic Precipitator Discharge Electrode Designs

New collecting and discharge electrode configurations are being used in electrostatic precipitators. In order to mathematically model preclpitators with these arrangements, it is necessary to develop reliable models of the field strength distributions of these electrodeplate geometries. This paper presents the concept of an equivalent wire diameter and attenuation functions, permitting use of the well-known wire-plate calculations. Experimental data presented in this paper shows the approximation techniques are sufficiently accurate.     

A temporal trend study (1972-2008) of perfluorooctanesulfonate, perfluorohexanesulfonate, and perfluorooctanoate in pooled human milk samples from Stockholm, Sweden

The widespread presence of perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and perfluorohexanesulfonate (PFHxS) in human general populations and their slow elimination profiles have led to renewed interest in understanding the potential human neonatal exposures of perfluoroalkyls (PFAs) from consumption of human milk. The objective of this study was to evaluate the concentrations of PFOS, PFHxS, and PFOA in pooled human milk samples obtained in Sweden between 1972 and 2008 (a period representing the most significant period of PFA production) and to see whether the time trend of these analytes parallels that indicated in human serum. Chemical analysis of PFOS, PFHxS, and PFOA was performed on pooled Swedish human milk samples from 1972 to 2008 after methodological refinements. The 20 samples which formed the 2007 pool were also analyzed individually to evaluate sample variations. Analyses were performed by HPLC-MS/MS. Due to the complexities of the human milk matrix and the requirement to accurately quantitate low pg/mL concentrations, meticulous attention must be paid to background contamination if accurate results are to be obtained. PFOS was the predominant analyte present in the pools and all three analytes showed statistically significant increasing trends from 1972 to 2000, with concentrations reaching a plateau in the 1990s. PFOA and PFOS showed statistically significant decreasing trends during 2001-2008. At the end of the study, in 2008, the measured concentrations of PFOS, PFHxS, and PFOA in pooled human milk were 75 pg/mL, 14 pg/mL, and 74 pg/mL, respectively. The temporal concentration trends of PFOS, PFHxS, and PFOA observed in human milk are parallel to those reported in the general population serum concentrations.     

XAFS study of starch-stabilized magnetite nanoparticles and surface speciation of arsenate

It has been shown that starch can effectively stabilize nanoscale magnetite particles, and starch-stabilized magnetite nanoparticles (SMNP) are promising for in situ remediation of arsenic-contaminated soils. However, a molecular level understanding has been lacking. Here, we carried out XAFS studies to bridge this knowledge gap. Fe K-edge XAFS spectra indicated that the Fe-O and Fe-Fe coordination numbers of SMNP were lower than those for bare magnetite particles, and these coordination numbers decreased with increasing starch concentration. The decrease in the average coordination number at elevated stabilizer concentration was attributed to the increase in the surface-to-volume ratio. Arsenic K-edge XAFS spectra indicated that adsorbed arsenate on SMNP consisted primarily of binuclear bidentate (BB) complexes and monodentate mononuclear (MM) complexes. More BB complexes (energetically more favorable) were observed at higher starch concentrations, indicating that SMNP not only offered greater adsorption surface area, but also stronger adsorption affinity toward arsenate.     

Uptake and distribution of metals by water lettuce (<Emphasis Type="Italic">Pistia stratiotes</Emphasis> L.)

Background, aim and scope  

Water quality impairment by heavy metal contamination is on the rise worldwide. Phytoremediation technology has been increasingly applied to remediate wastewater and stormwater polluted by heavy metals.     

Investigation on gene transfer from genetically modified corn (Zea mays L.) plants to soil bacteria

Knowledge about the prevalence and diversity of antibiotic resistance genes in soil bacteria communities is required to evaluate the possibility and ecological consequences of the transfer of these genes carried by genetically modified (GM) plants to soil bacteria. The neomycin phosphotransferase gene (nptII) conferring resistance to kanamycin and neomycin is one of the antibiotic resistance genes commonly present in GM plants. In this study, we investigated kanamycin-resistant (Km(R)) and neomycin-resistant (Nm(R)) soil bacterial populations in a 3-year field trial using a commercial GM corn (Zea mays L.) carrying the nptII gene and its near isogenic line. The results showed that a portion (2.3 - 15.6 %) of cultivable soil bacteria was naturally resistant to kanamycin or neomycin. However, no significant difference in the population level of Km(R) or Nm(R) soil bacteria was observed between the GM and non-GM corn fields. The nptII gene was not detected in any of the total 3000 Km(R) or Nm(R) isolates screened by PCR. Further, total soil bacterial cells were collected through Nycodenz gradient centrifugation and bacterial community DNA was subjected to PCR. Detection limit was about 500 cells per gram of fresh soil. Our study suggests that the nptII gene was relatively rare in the soil bacterial populations and there was no evidence of gene transfer from a GM corn plant to soil bacteria based on the data from total soil bacterial communities.