Biofiltration of trimethylamine-containing waste gas by entrapped mixed microbial cells

The study provides novel attempt to use an aerobic biofiltration system containing entrapped mixed microbial cells (EMMC) for removal of (CH3)3N-dominant waste gases. In the study, heterotrophic microflora-immobilized cellulose was packed into an EMMC reactor to degrade (CH3)3N. Effects of (CH3)3N inlet concentrations in continuous mode of operation at various flow rates are indicated. The result indicated that the (CH3)3N removal efficiency is higher than 90% at inlet loading below 27.2 mgNh(-1) and retention time 5.3 min. In addition, the maximal mass loading to reach approximately 99% efficiency was 95.5 mgNh(-1) for trimethylamine treatment. This EMMC biofiltration system also showed higher tolerance to endure fluctuations in concentrations and flow rates and still maintained in stable performance for removal. Adaptability test in response to gradual shift up and down of inlet TMA loading indicated that lack of steady-state multiplicity and hysteresis guarantees the microbial communities more precisely adapted to continuous treatment for maintaining stability.     

Evaluation of the emission characteristics of PCDD/Fs from electric arc furnaces

Distribution of PCDD/F (polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran) congeners at two electric arc furnaces (EAFs) in Taiwan is evaluated via intensive stack sampling and analysis. Two kinds of exhaust system in EAFs including stack system and shutter system are selected for measuring dioxin emissions. In addition, dioxin emissions during oxidation and reduction stages at EAF-A were characterized. Results indicate that the PCDD/F concentration of stack gas in EAF-A was 4.39 ng/N m³ while total Toxic Equivalent Quantity (TEQ) concentration was 0.35 ng I-TEQ/N m³. The PCDD/F concentration of stack gas in EAF-B was 2.20 ng/N m³ and the TEQ concentration was 0.14 ng I-TEQ/N m³. 1,2,3,4,6,7,8-H_pCDF, OCDD and OCDF are the major contributors of the dioxin concentrations for two EAFs investigated and the percentage of PCDD/F in particulate phase increases as the chlorination level of the PCDD/F congener increases. The results obtained on gas/particulate partitioning of PCDD/Fs in flue gases prior to the APCD in EAFs indicate that more than 90% exists in particulate phase. In EAF-A, the PCDD/F concentration during oxidation stage is slightly higher than that measured during reduction stage, including the sampling points of CO converter outlet, prior to bag filter and stack. Majority of PCDD/Fs emitted from steel-making processes exists in particulate-phase (about 60–70%) at both EAFs investigated.     

Synthesis of branched allylic sulfones by regioselective boron-catalysed hydrosulfonylation

Environmental Chemistry Letters - Branched allylic sulfones are scaffolds widely distributed in bioactive molecules and organic functional materials. The synthesis of allylic sulfones has been...     

Vegetation dynamics and climate change on the Loess Plateau,China: 1982–2011

Monitoring the dynamics of vegetation growth and its response to climate change is important to understand the mechanisms underlying ecosystem behaviors. This study investigated the relationship between vegetation growth and climate change during the growing seasons on the Loess Plateau in China by analyzing the normalized difference vegetation index (NDVI) derived from the Land Long Term Data Record dataset from 1982 to 2011. Results showed that growing-season NDVI had increased at an annual rate of 0.0028, particularly in the semi-arid and semi-humid regions. By contrast, the NDVI first increased from 1982 to 1994 (0.0013 year^?1, P < 0.05) and then decreased from 1994 to 2011 (0.0016 year^?1, P < 0.05) in the arid region. Temperature had a positive effect on NDVI in most periods within and across seasons in the semi-humid region but had no significant effect in the arid region. Precipitation had a positive effect on NDVI in the arid region in summer and in the semi-arid region in autumn. Summer precipitation was important for autumn vegetation growth in the arid region, whereas summer temperature increased autumn vegetation growth in the semi-arid and semi-humid regions. Further analyses supported the lag-time effects of climate change on vegetation growth on the Loess Plateau. Precipitation shifts had 15- to 18-month time lag effects on vegetation growth in the three climate regions. Vegetation NDVI had a 17-month lag response to temperature in the semi-arid region. Human activities should not be neglected in analyzing the relationship between vegetation growth and climate change on the Loess Plateau.     

Forecasting municipal solid waste generation in a fast-growing urban region with system dynamics modeling

Both planning and design of municipal solid waste management systems require accurate prediction of solid waste generation. Yet achieving the anticipated prediction accuracy with regard to the generation trends facing many fast-growing regions is quite challenging. The lack of complete historical records of solid waste quantity and quality due to insufficient budget and unavailable management capacity has resulted in a situation that makes the long-term system planning and/or short-term expansion programs intangible. To effectively handle these problems based on limited data samples, a new analytical approach capable of addressing socioeconomic and environmental situations must be developed and applied for fulfilling the prediction analysis of solid waste generation with reasonable accuracy. This study presents a new approach--system dynamics modeling--for the prediction of solid waste generation in a fast-growing urban area based on a set of limited samples. To address the impact on sustainable development city wide, the practical implementation was assessed by a case study in the city of San Antonio, Texas (USA). This area is becoming one of the fastest-growing regions in North America due to the economic impact of the North American Free Trade Agreement (NAFTA). The analysis presents various trends of solid waste generation associated with five different solid waste generation models using a system dynamics simulation tool--Stella. Research findings clearly indicate that such a new forecasting approach may cover a variety of possible causative models and track inevitable uncertainties down when traditional statistical least-squares regression methods are unable to handle such issues.     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

陕西省1990年自然灾害和救灾工作回顾：兼谈1991年减灾对策

本文在回顾1990年陕西省灾情及救灾工作基础上,提出了强化政府在减灾中的职能,搞好灾情预测预报、及早制定防灾预案及灾前准备工作的减灾对策。     

Subcellular localisation and identification of95mTc- and241Am-binding ligands in the hepatopancreas of the lobsterHomarus gammarus

Following uptake of technetium-95m and americium-241 by lobsters (Homarus gammarus) from food, the subcellular distribution and binding in the major organ of accumulation, the digestive gland, were analysed.^95mTc was predominantly bound to soluble proteins; approximately 40% was bound to two proteins displaying the same elution characteristics as Cdthioneins as indicated by gel permeation and ion-exchange chromatography, indicating reduction and sequestration by metallothionein in vivo. The identity of a third anionic low molecular weight Tc-binding component was not established. No evidence was found for binding of Tc to haemocyanin, ferritin or transferrin. Particulate Tc [probably TcO(OH)₂] was bound to plasma membranes and was also present in lysosomes, indicating reduction of pertechnetate and pinocytosis in the digestive gland. In contrast,²⁴¹Am was mainly sequestered by the lysosomal/vacuolar system, indicative of uptake by pinocytosis. Approximately 2 to 3% of the Am was bound to ferritin and 20% was bound to unidentified ligands of 10 and 20 kdaltons mol. wt. There was no evidence for sequestration of Am by metallothionein. These studies prove that waste radionuclides discharged by the nuclear industry are metabolically active and enter the normal metal metabolism and detoxication pathways of a marine shellfish.     

化工反应装置危险性分析模式的研究

从近年来化工企业的安全生产事故可以看出,化工生产由于其自身的特点,具有较大的火灾爆炸危险性,因此,正确地对化工企业生产的危险性进行分析,对准确地评价化工企业的安全生产状况非常重要.针对化工企业的安全生产特点,提出了一种针对化工反应装置的危险性分析模式,不仅考虑了生产原料及工艺设备,同时也对工艺过程进行了危险性分析.应用实例表明,该模式对于化工装置的危险性分析具有较强的针对性和可靠性.     

光纤传感器在个体防护装备上的应用进展

1引言 在战场上,个体防护装备对士兵有效地发挥战斗力和避免伤亡起到关键的作用。现代科学技术在军事领域的广泛应用,使得防护装备突破了传统模式,新一代的单兵防护装备不仅要抵御武器的袭击,而且要避免自然环境、化学试剂、火焰和其他战场灾难的危害,须成为高度智能化的作战服。