Process analysis of a regional air pollution episode over Pearl River Delta Region,China, using the MM5-CMAQ model

This study focuses on the influences of a warm high-pressure meteorological system on aerosol pollutants, employing the simulations by the Models-3/CMAQ system and the observations collected during October 10–12, 2004, over the Pearl River Delta (PRD) region. The results show that the spatial distributions of air pollutants are generally circular near Guangzhou and Foshan, which are cities with high emissions rates. The primary pollutant is particulate matter (PM) over the PRD. MM5 shows reasonable performance for major meteorological variables (i.e., temperature, relative humidity, wind direction) with normalized mean biases (NMB) of 4.5–38.8% and for their time series. CMAQ can capture one peak of all air pollutant concentrations on October 11, but misses other peaks. The CMAQ model systematically underpredicts the mass concentrations of all air pollutants. Compared with chemical observations, SO₂ and O₃ are predicted well with a correlation coefficient of 0.70 and 0.65. PM_2.5 and NO are significantly underpredicted with an NMB of 43% and 90%, respectively. The process analysis results show that the emission, dry deposition, horizontal transport, and vertical transport are four main processes affecting air pollutants. The contributions of each physical process are different for the various pollutants. The most important process for PM₁₀ is dry deposition, and for NO_x it is transport. The contributions of horizontal and vertical transport processes vary during the period, but these two processes mostly contribute to the removal of air pollutants at Guangzhou city, whose emissions are high. For this high-pressure case, the contributions of the various processes show high correlations in cities with the similar geographical attributes. According to the statistical results, cities in the PRD region are divided into four groups with different features. The contributions from local and nonlocal emission sources are discussed in different groups.

Implications: The characteristics of aerosol pollution episodes are intensively studied in this work using the high-resolution modeling system MM5/SMOKE/CMAQ, with special efforts on examining the contributions of different physical and chemical processes to air concentrations for each city over the PRD region by a process analysis method, so as to provide a scientific basis for understanding the formation mechanism of regional aerosol pollution under the high-pressure system over PRD.     

大气颗粒物样品中主量和痕量元素的直接测定

采用一种新的标样制备方法,用波长色散X射线荧光光谱直接定量分析由微孔滤膜抽滤所吸附和收集的大气颗粒物中主量和痕量无机元素.具有快速、简便、准确和经济等特点.     

ORP控制在硫化物生物氧化成单质硫过程中的应用

试验采用气升式反应器,接种实验室自行培养的排硫硫杆菌种,在进水pH值为7.0±0.2,温度控制在30±2℃条件下,研究了以ORP为控制参数在硫化物生物氧化成单质硫过程中的应用,并考察了pH和污泥硫负荷对ORP及硫化物生物氧化的影响.结果表明,硫化物去除率和硫酸根生成率均随ORP的降低而下降,不同容积负荷下,控制合适的ORP均可得到单质硫的最大生成率;当ORP为-380～340 mV,pH为7.85～8.63,污泥硫负荷为8.4 kg S/(kg MLSS·d)时,反应器运行状况良好.     

翻车机粉尘治理研究与实践

揭示翻车机翻卸物料的产尘机理,通过理论分析和计算机模拟,分析翻车机翻卸物料时产生的气流及其分布。详细介绍翻车机粉尘污染治理的新思路、新方法。结果表明:采用通风喷雾降尘方法对于翻车机粉尘综合治理更为有效。将该方案应用于某钢铁企业的翻车机粉尘治理中,取得了良好的降尘效果,实现了高效、可持续发展的安全生产。     

净水剂在滇池蓝藻清除部分应急工程中的应用

在大观河和滇池内外草海结合部使用云环一号及其加强型净水剂清除蓝藻，结果表明除藻见效快，无毒副作用，成本低廉。本文介绍了实施条件、实施过程、实施效果及其经济评估。     

双室和单室微生物燃料电池的研究及比较

微生物燃料电池(MFC)可分为双室和单室燃料电池.简述了双室和单室MFC的工作机制,综述了双室MFC中阳极(材料)、阴极(材料)、分割材料和单室MFC中"二合一"、"三合一"型以及无膜型电池的特点,比较并分析了双室和单室MFC在构型上的优缺点,以及两者在内阻、功率密度和库仑效率等方面产生差异的原因,展望了MFC的发展前景.     

焙烧温度对层柱粘土催化剂Cu/Ti-PILCs催化丙烯还原NO反应的影响

制备了钛层柱粘土负载铜催化剂Cu/Ti-PILCs,用于有氧条件下C3H6选择性还原NO反应,考察了焙烧温度对Cu/Ti-PILCs的催化活性、孔结构和表面活性物种状态的影响。500℃焙烧的Cu/Ti-PILCs具有最佳的催化活性。Cu/Ti-PILCs的孔结构在600℃焙烧温度下具有良好的热稳定性。H2-TPR和SEM显示,在500℃焙烧的Cu/Ti-PILCs上,铜物种高度分散,主要以活性物种Cu2+的形式存在。700℃焙烧引起较小孔的孔结构崩塌,使得催化剂比表面大幅降低,且高温焙烧下Cu/Ti-PILCs形成没有催化活性的铜氧化物团聚体,导致了催化活性的大幅降低。     

改性凹凸棒土的优化定向制备及对腐殖酸的吸附效果

以天然凹凸棒土为原料,以去除以腐殖酸为代表的天然有机物为目的,研究酸活化、热处理和十八烷基三甲基氯化铵(OTAC)有机改性3种改性方法,进行定向筛选。进一步比较3种方法联合改性凹土后对腐殖酸的吸附效果,确定最优定向改性方法。结果表明,先酸处理后OTAC改性凹土对腐殖酸的吸附效果最好,改性凹土投药量为0.7 g/L时,腐殖酸的去除率可达97%。利用正交实验确定凹土改性的最佳工艺条件、钠化时间和有机改性剂的用量对改性凹土吸附腐殖酸的能力影响显著。改性的最佳工艺条件为:酸浓度3 mol/L,氯化钠浓度0.5 mol/L,钠化时间2 h,改性剂用量为凹土质量的3%,微波改性时间为9 min。单独投加改性凹土时pH值对腐殖酸的吸附效果有重要影响。该方法制备的改性凹土在水处理工艺有良好的应用前景。     

零价铁与甲醇支持的生物-化学法去除富氧水中的硝酸盐氮

针对富氧水中硝酸盐氮（NO3--N）,采用零价铁（ZVI）和甲醇支持的生物-化学联合法开展了批实验研究,探讨了ZVI类型、CH3OH：N比、初始溶解氧（DO）浓度、初始NO3--N浓度和水温等5个因素对联合法除氧脱氮效果的影响。结果表明,ZVI的除氧能力由高至低依次为：ZVI-C（0.124 d）>ZVI-A（0.141 d）>ZVI-B（0.179 d）。ZVI支持的联合法NO3--N去除率由高至低依次为：ZVI-A（99.6%）>ZVI-C（95.3%）>ZVI-B（92.2%）。CH3OH：N≤3.5：1时,联合法去除3--N;CH3OH：N=10：1时,去除100%的NO3--N;CH3OH：N=200：1时,去除70.2%的NO3--N。当初始DO浓度介于3.6~5.3 mg/L之间时,联合法的NO3--N去除率介于98.8%~99.6%之间。在任意时刻,低底物浓度（5.2 mg/L）时的NO3--N去除率低于高浓度（21.1 mg/L）时的去除率;低底物浓度下完全脱氮所需时间比高浓度下长2 d。15.0℃时联合法需要7 d可以达到完全脱氮,然而在27.5℃时则需要5 d。低温时亚硝酸盐氮浓度最大值（4.4 mg/L）显著高于高温时的最大值（1.1 mg/L）。ZVI类型、CH3OH：N、初始NO3--N浓度和水温显著影响联合法的脱氮效果,而初始DO浓度对联合法的影响不大。