金属有机骨架材料对水中有机酸的吸附性能

制备了MIL-100(Fe)、MIL-100(Cr)和NH_2-MIL-101(Al)3种金属有机骨架(MOFs)材料,考察了这3种MOFs材料对苯甲酸、水杨酸和山梨酸3种有机酸模拟废水的吸附处理效果,并与大孔吸附树脂D101进行了比较。实验结果表明:NH_2-MIL-101(Al)对苯甲酸的平衡吸附量最大,D101平衡吸附量中等,MIL-100(Cr)和MIL-100(Fe)平衡吸附量很小;NH_2-MIL-101(Al)对山梨酸具有优异的吸附性能,MIL-100(Cr)、MIL-100(Fe)和D101对山梨酸的平衡吸附量较低;3种MOFs材料和D101对水杨酸的平衡吸附量均很小。NH_2-MIL-101(Al)对山梨酸和苯甲酸的等温吸附过程可用Langmuir方程更好地拟合;NH_2-MIL-101(Al)对水杨酸的等温吸附过程可用Freundlich方程更好地拟合。     

Water quality assessment in Qu River based on fuzzy water pollution index method

A fuzzy improved water pollution index was proposed based on fuzzy inference system and water pollution index. This method can not only give a comprehensive water quality rank, but also describe the water quality situation with a quantitative value, which is convenient for the water quality comparison between the same ranks. This proposed method is used to assess water quality of Qu River in Sichuan, China. Data used in the assessment were collected from four monitoring stations from 2006 to 2010. The assessment results show that Qu River water quality presents a downward trend and the overall water quality in 2010 is the worst. The spatial variation indicates that water quality of Nanbashequ section is the pessimal. For the sake of comparison, fuzzy comprehensive evaluation and grey relational method were also employed to assess water quality of Qu River. The comparisons of these three approaches'' assessment results show that the proposed method is reliable.     

云南香格里拉本底站大气CH4体积分数及变化特征

利用基于光腔衰荡光谱(CRDS)技术自组装的大气CH4在线观测系统,于2010年7月—2011年10月在云南香格里拉大气本底站对大气CH4进行了在线观测.结果发现,该站春、夏、秋、冬季CH4平均本底值分别为(1850.7±6.9)×10-9(体积分数,下同)、(1850.9±13.4)×10-9、(1865.6±16.1)×10-9和(1839.2±6.5)×10-9.全年体积分数在9月最高,12月最低,月均值振幅约39.6×10-9.4季日平均最低值均出现在14:00—16:00.日变化振幅在冬季最小,秋季最大,分别为4.4×10-9和10.0×10-9.西南来向的地面风会明显抬升CH4体积分数,而北偏东来向的地面风显著降低观测结果.通过4季每日整点后向轨迹聚类计算,结合观测资料分析发现,该站CH4主要受西南来向气团传输影响,尤其在春、夏、秋3季.     

Effect of Prescribed Fire on Soil Properties and N Transformation in Two Vegetation Types in South China

Prescribed fire is a common site preparation practice in forest management in southern China. However, the effect of fire on soil properties and N transformations is still poorly understood in this region. In this study, soil properties and N transformations in burned and unburned site of two vegetation types (Eucalyptus plantation and shrubland) were compared in rainy and dry seasons after 2 years’ prescribed fire. Soil pH and soil NH₄-N were all higher in the burned site compared to the unburned control. Furthermore, burned sites had 30–40 % lower of soil total phosphorus than conspecific unburned sites. There was no difference in soil organic matter, total N, soil exchangeable cations, available P or NO₃-N. Nitrogen mineralization rate of 0–5 cm soil in the unburned site ranged from 8.24 to 11.6 mg N kg^?1 soil month^?1 in the rainy season, compared to a lower level of 4.82–5.25 mg N kg^?1 soil month^?1 in the burned sites. In contrast, 0–5 cm layer nitrification rate was overall 2.47 mg N kg^?1 soil month^?1 in the rainy season, and was not significantly affected by burning. The reduced understory vegetation coverage after burning may be responsible for the higher soil NH₄-N in the burned site. This study highlights that a better understanding the effect of prescribed burning on soil nutrients cycling would provide a critical foundation for management decision and be beneficial to afforestation in southern China.     

Synthesis and Characterization of Biodegradable Starch-Polyacrylamide Graft Copolymers Using Starches with Different Microstructures

The effects of starch structures, in particular amylose content, on grafting reactions were investigated using thermal gravimetric analysis (TGA), nuclear magnetic resonance, X-ray diffraction (XRD). As a model system, corn starches with different amylose contents (0, 26, 50 and 80 %) were grafted onto acrylamide to produce superabsorbent polymers (SAPs). The weight loss measured by TGA at different temperature was used to analyze the grafting ratio in quantity. In general, the grafting ratio increased (about 10 %) with increasing starch amylose content, and graft chain segment lengths were much lower for the amylopectin-rich (waxy) starch. The high molecular weight and branched structure of the amylopectin reduced the mobility of the polymer chains and increased viscosity, which resulted in resistance to chain growth. The water absorption capability was increased with increasing amylose content for the starch-based SAPs. XRD detection showed that the crystalline structure of all starches was destroyed after grafting reactions. The thermal stability of the polyacrylamide grafted onto the starches increased by about 10 °C, which could be explained by the strong bonding between the grafted polymer chains and the starch matrices.     

Application of aluminosilicate clay mineral-based composites in photocatalysis

Aluminosilicate clay mineral (ACM) is a kind of typical raw materials that used widely in manufacturing industry owing to the abundant reserve and low-cost exploring. In past two decades, in-depth understanding on unique layered structure and abundant surface properties endows ACM in the emerging research and application fields. In field of solar-chemical energy conversion, ACM has been widely used to support various semiconductor photocatalysts, forming the composites and achieving efficient conversion of reactants under sunlight irradiation. To date, classic ACM such as kaolinite and montmorillonite, loaded with semiconductor photocatalysts has been widely applied in photocatalysis. This review summaries the recent works on ACM-based composites in photocatalysis. Focusing on the properties of surface and layered structure, we elucidate the different features in the composition with various functional photocatalysts on two typical kinds of ACM, i.e., type 1:1 and type 2:1. Not only large surface area and active surface hydroxyl group assist the substrate adsorption, but also the layered structure provides more space to enlarge the application of ACM-based photocatalysts. Besides, we overview the modifications on ACM from both external surface and the inter-layer space that make the formation of composites more efficiently and boost the photo-chemical process. This review could inspire more upcoming design and synthesis for ACM-based photocatalysts, leading this kind of economic and eco-friendly materials for more practical application in the future.     

Cd accumulation and phytostabilization potential of dominant plants surrounding mining tailings

The objectives of the present study were to compare nine dominant plant species growing in mine tailings and nonmining areas in terms of biomass and Cd concentrations and to search for Cd accumulation and tolerance. Also, more detailed experiments were conducted on Athyrium wardii using a pot experiment to assure its Cd-accumulation ability and tolerance as a potential phytostabilizer of Cd-polluted soils. Nine dominant plant species growing on Pb/Zn mine tailings and their corresponding nonmining ecotypes were investigated for their potential to phytostabilize Cd. The performance of A. wardii exposed to high levels of Cd was investigated under controlled conditions. A field study revealed that the Cd concentrations in the roots of these plants ranged from 0.21 to 251.07?mg?kg^?1, and the highest concentrations were found in A. wardii, which reached a concentration of 69.78, 251.07, and 126.35?mg?kg^?1 during the early growth stage (May), vigorous growth stage (August), and late growth stage (October), respectively. The Cd concentrations of roots among the nine mining ecotypes were positively correlated with available content of Cd in the rhizosphere soils, whereas a negative correlation was observed in the nonmining ecotypes. A pot experiment showed that the mining ecotype of A. wardii had a higher biomass production and Cd retention capacity in roots than that of the nonmining ecotype. Due to the relatively high tolerance to Cd and the capacity of roots to retain this metal, A. wardii may be useful for the phytostabilization of soils contaminated by Cd.     

玉米,大豆中减钾总β放射性的快速测定方法

本文以原子吸收光谱法代替经典的化学法测定钾含量,以短时间方法测定总β,经优选条件后,实现了减钾总β放射性的快速分析。     

煤矿安全监控装备可靠性评价方法的研究

针对如何评价和选择矿井安全监控系统装备的问题。运用科学的方法，就几种不同型号装备，做了定量和定性的阐述，还就建立监测系统装备的可靠性评价结构模型和数学分析模型做了分析。也对其他几个人为影响因素的性能指标提出了定性分析方法。     

灾害史研究中的年代换算及其软件

“灾害史中的年代换算（TCHD）”软件是进行年代换算的专用软件。本文研究了几种主要历法的年代换算的具体算法．介绍了该软件的结构，流程和功能．TCHD软件使灾害学和历史学等领域的研究人员摆脱了传统的朔闰表式的历法对照和检索方式，并成为灾害史工作计算机化的一部分。