中国城市建设用地集聚对利用效率的影响:机理、空间效应与分群差异

为探究城市建设用地集聚对城市建设用地利用效率的作用机理,文章基于2003—2017年中国278个地级及以上城市面板数据,通过构建多产出随机前沿生产函数模型测度城市建设用地利用效率,采用时间-空间双固定的空间杜宾模型探讨了不同程度的城市建设用地集聚对利用效率的影响机理与差异。结果表明:(1)从时空特征上来看,样本考察期内中国城市建设用地利用效率总体上呈稳步提升趋势,东部城市建设用地效率最高,西部次之,中部最低。(2)从全国维度的空间计量模型回归结果来看,城市建设用地集聚所带来的规模效应和外溢效应对城市建设用地利用效率具有改进作用,有利于利用效率进一步提升。(3)从不同城市建设用地集聚度分群回归结果来看,高集聚城市(东部发达地区)的直接效应显示随着城市建设用地集聚度的提高,利用效率也不断提高;间接效应中,建设用地集聚度的提高对周边城市的利用效率产生先带动后抑制的"倒U"形作用。低集聚城市(中西部欠发达地区)的直接效应和间接效应均显示,随着城市建设用地集聚的提高,其利用效率存在"先降后升"的"U"形曲线特征。可见,在城市发展的不同阶段,城市建设用地集聚对城市土地利用效率存在差异化影响。因此,中国城市发展应立足当前发展阶段特征,制定差别化的供地政策,促进城市建设用地集聚,针对性地提升区域要素利用效率,支撑经济社会进一步发展。     

淀山湖沉积物的污染特征及其风险评价

对上海淀山湖代表性表层沉积物中的重金属、磷、PAHs及OCPs等典型污染物质进行了分析和风险评价。其中总磷含量范围为1 072~1 229 mg/kg,以无机磷为主,生物可利用磷含量较高,对水体富营养化具有潜在的威胁。重金属Cu、Cr、Zn、Pb的平均含量分别为25.5、34.1、244.5、32.2 mg/kg,污染程度大小依次为ZnPbCuCr,潜在生态风险程度依次为PbCuZnCr。∑PAHs、∑OCPs含量范围分别为617.1~843.2 ng/g以及22.03~28.94 ng/g,风险结果表明PAHs和大部分OCPs均未超出ERL值,生态风险水平低。     

京津冀典型城市采暖季颗粒物浓度与元素分布特征

选择京津冀地区3个典型城市和从南至北的4个国家大气背景站作为研究对象,收集采暖季空气颗粒物PM2.5、PM10样品,微波消解-ICP-MS法分析了样品中的68种元素。结果表明,北京、天津、石家庄PM2.5和PM10日均质量浓度均高于国家二级标准限值和背景点,一元线性回归分析结果表明,PM10与PM2.5质量浓度呈线性相关,Na、Mg、Al、S、K、Ca、Fe质量浓度为0.1~10μg/m3,Si、P、Ti、Mn、Ni、Cu、Zn、Ba、Pb质量浓度为10~100 ng/m3,其他元素质量浓度为0.01~10 ng/m3或未检出。在元素构成上,S、Na、Al、K、Fe、Mg、Ca、P、Si等是主要元素,元素含量均大于1%。其他微量元素每种元素含量为0.1%~1%。14种重点防控重金属在PM2.5中的吸附显著高于PM10,主要来源于燃煤、燃油、工业排放、机动车尾气等。     

超临界水氧化技术处理含油污水研究

在间歇式实验装置上对超临界水氧化技术处理含油污水进行了研究,主要考察了COD的脱除率与反应时间、温度和压力的关系。实验结果表明,超临界水中的氧化反应能有效去除污水中COD,反应时间、反应温度是影响COD脱除率的重要因素。     

乌伦古湖水质现状、变化趋势及预测

通过对乌伦古湖现状水质及近十年来水质变化趋势的评价,分析了污染成因,并采用灰色预测法预测乌伦古湖未来几年的水质状况,为区域水环境保护和水体污染防治提供科学依据。     

新疆环境空气中PM_(2.5)/PM_(10)比值特征分析

随着环境空气质量新标准的全面实施,PM_(2.5)监测已经全面普及,并成为全国大部分城市关注的首要污染物,根据新疆环境空气质量监测网中不同区域、不同时段颗粒物(PM_(2.5)、PM_(10))质量浓度监测结果,对PM_(2.5)/PM_(10)质量浓度的比值关系进行深入分析,研究其在新疆典型区域特殊气象条件下的分布规律,为科学合理评价和考核新疆环境空气质量提供数据支持与参考。     

建设项目竣工环境保护验收现状及建议

简述了当前建设项目竣工环境保护验收的现状,指出竣工环境保护验收存在权责不明、事中监管缺失、事后监管落地难、监测数据"失真"等问题,提出应落实建设单位的主体责任,规范建设项目竣工环境保护企业自行验收,加强事中、事后监管,整合建设单位监测数据,使验收监测数据发挥实效。     

Identification of sources of elevated concentrations of polycyclic aromatic hydrocarbons in an industrial area in Tianjin, China

The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography equipped with a mass spectrometry detector in 105 topsoil samples from an industrial area around Bohai Bay, Tianjin in the North of China. Results demonstrated that concentrations of PAHs in 104 soil samples from this area ranged from 68.7 to 5,590 ng g^???1 dry weight with a mean of ∑16PAHs 814 ± 813 ng g^???1, which suggests that there exists mid to high levels of PAH contamination. The concentration of ∑16PAHs in one soil sample from Tianjin Port was exceptionally high (48,700 ng g^???1). Ninety-three of the 105 soil samples were considered to be contaminated with PAHs (>200 ng g^???1), and 25 were heavily polluted (>1,000 ng g^???1). The sites with high PAHs concentration are mainly distributed around chemical industry parks and near highways. Two low molecular weight PAHs, naphthalene and phenanthrene, were the dominant components in the soil samples, which accounted for 22.1% and 10.7% of the ∑16PAHs concentration, respectively. According to the observed molecular indices, house heating in winter, straw stalk combustion in open areas after harvest, and petroleum input were common sources of PAHs in this area, while factory discharge and vehicle exhaust were the major sources around chemical industrial parks and near highways. Biological processes were probably another main source of low molecular weight PAHs.     

Occurrence,sources, and ecological risks of PBDEs,PCBs, OCPs,and PAHs in surface sediments of the Yangtze River Delta city cluster,China

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.