Pollution characteristics of 23 veterinary antibiotics in livestock manure and manure-amended soils in Jiangsu province,China

The aim of this study was to investigate the pollution characteristics of typical veterinary antibiotics in manure and soil of livestock farms in Jiangsu province. This investigation employed solid-phase extraction (SPE) coupled with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). A total of 53 manure and 50 amended soil samples from 16 livestock farms in Jiangsu province were collected for analysis. In the manure samples, the highest detected frequencies and concentrations were those of tetracyclines (TCs, 54.1 ± 5775.6 μgkg^?1), followed by fluoroquinolones (FQs, 8.4 ± 435.6 μgkg^?1), sulphonamides (SAs, 3.2 ± 5.2 μgkg^?1) and macrolides (MACs, 0.4 ± 110.5 μgkg^?1). Statistical analysis was used to illuminate the pollution characteristics of 23 veterinary antibiotics for various animal types and different regions in Jiangsu province. The results showed that the pollution level in cow manure was relatively lower compared with pig and chicken manure due to the relative restriction of medication. Furthermore, contamination was serious in amended soil from chicken farms. The pollution level in manure among different regions was higher to the south and north compared with the centre of the region. The same outcome was found for soil. Antibiotic residues in organic fertilizer were also investigated in this study. We found that although the detected concentration was lower in organic fertilizer than in fresh manure, detection frequencies (10–90%) were high, especially for roxithromycin (90%) in MACs (30–90%). This finding suggests attention should be paid to the pollution levels in organic fertilizer. This study is the first extensive investigation of the occurrence and distribution of many kinds of typical veterinary antibiotics in manure and soil from livestock farms of Jiangsu province. This investigation systematically assesses veterinary antibiotics usage and related emissions in southeast China.     

Variations of metal distribution in sewage sludge composting

In the study, the variations of heavy metal distributions (of Cu, Mn, Pb, and Zn) during the sewage sludge composting process were investigated by sequential extraction procedures. The total content of Cu and Zn in the composted mixture increased after the composting process. Mn and Zn were mainly found in mobile fractions (exchangeable fraction (F1), carbonate fraction (F2), and Fe/Mn oxide fraction (F3)). Cu and Pb were strongly associated with the stable fractions (organic matter/sulfides fraction (F4) and residual fraction (F5)). These five metal fractions were used to calculate the metal mobility (bioavailability) in the sewage sludge and composted mixture. The mobility (bioavailability) of Mn, Pb, and Zn (but not Cu) increased during the composting process. The metal mobility in the composted mixture ranked in the following order: Mn>Zn>Pb>Cu.     

Influence of clay minerals on the reduction of Cr6+ by citric acid

The influence of clay minerals on the reduction of Cr6+ by citric acid was investigated at pH values 4.0, 4.5 and 5.0 at 25 degrees C. The results indicate that montmorillonite and illite greatly accelerate the reduction reactions at pH 4.0 and 4.5, but their effects are dramatically reduced at pH 5.0. The role of clay minerals in accelerating the reactions is in the order: illite>montmorillonite>kaolinite, which has a positive correlation with the amount of Mn2+ adsorbed on the surfaces of these minerals. With light, Fe(3+) also significantly increases reaction rates. Ethylenediaminetetraacetic acid (EDTA) greatly suppresses the acceleration of the reduction reactions by these minerals, indicating that EDTA competes with citric acid for Mn2+. Thus, the formation of complexes between Mn(2+) and citric acid could be a prerequisite for the acceleration of the reductions of Cr6+ by clay minerals. In addition, there is no relationship between the specific surface area of clay minerals and the reduction rate of Cr6+ by citric acid.     

伪装遮障材料耐老化性能与机理分析

目的 研究伪装遮障材料在实用期的老化机理,获悉伪装遮障材料失效的主要环境因素。方法 通过分析伪装遮障材料在自然环境和实验室单因素环境中的性能变化,得出影响伪装遮障材料老化失效的主要因素。采用扫描电子显微镜、红外光谱仪、X射线光电子能谱仪表征材料的微观形貌、化学结构和化学成分变化,解释伪装遮障材料的老化机理。结果 获得了在不同自然环境、实验室单因素环境下,伪装遮障材料颜色外观和力学性能的变化规律,得到了伪装遮障材料在老化过程中发生的微观形貌、化学结构和化学成分变化。结论 伪装遮障材料在西双版纳自然环境下的老化程度最大,在济南自然环境下的老化程度最小。光照是导致伪装遮障材料颜色外观及力学性能降低的主要因素。老化过程中,主要是材料表面的聚氨酯发生老化、脱落,导致材料的力学性能下降。伪装遮障材料破坏时,纤维有2种失效形式,一种是纤维脱黏、直接断裂;另一种是纤维脱黏,拔出,或者拔出过程中断裂。     

海洋环境服役发动机腐蚀损伤分析及防护能力提升建议

通过我国航空发动机海洋环境服役过程中腐蚀情况的调研,结合文献资料,分析腐蚀防护与控制技术的应用现状,提出未来工作建议。目前海洋环境服役航空发动机的腐蚀防护与控制缺少贯穿方案论证、设计研制、使用维修等全寿命周期各阶段的综合考虑,制约解决腐蚀问题的关键技术没有突破,研制生产过程中,存在耐腐蚀性能评估不合理的问题。应开展腐蚀智能监测、识别、模拟仿真等技术的研发与应用,实现海洋环境服役发动机的腐蚀损伤监控与预警,构建发动机腐蚀环境适应性试验评价技术体系,满足新体制下装备试验鉴定工作要求。急需开展长寿命防护涂层技术、维护技术专项研究,以适应严酷海洋大气环境和航空动力装置高可靠性研制要求。     

活性碳纤维改性技术研究进展

介绍了活性碳纤维(ACF)的孔结构及表面官能团,综述了国内外ACF改性技术的研究现状.ACF的改性主要包括孔结构调控和表面化学改性,表面化学改性包括氧化还原法、表面负载法、浸渍法、热处理法、远程等离子体处理法、微波辐照法等,也可将多种方法结合来对ACF进行改性,以改善和提高ACF的吸附性能.在总结现有研究的基础上,对ACF改性技术发展趋势进行了展望.     

UASB反应器处理染料及印染废水的研究进展

综述了国内外UASB反应器处理染料及印染废水的研究概况.分析了UASB反应器处理废水存在的问题,并给出了相应的建议.展望了UASB反应器处理染料及印染废水的发展趋势,指出厌氧UASB-好氧法组合工艺是目前处理染料及印染废水的一种经济而有效的方法.     

基于RS和GIS的长江安庆段岸线资源评价

应用遥感影像结合GIS相关技术对长江安庆段岸线进行解译、分类，查清长江安庆段岸线资源分类长度，并采用岸前水深和岸线稳定性两个评价指标对岸线资源进行分等评价，兼顾岸前航道水域宽度和后方陆域场地条件两个限制性因素，综合确定岸线条件的优劣。评价结果：长江安庆段岸线总长度为249．6km，一级、二级优良岸线62．4km，三级岸线187．2km；开发条件较好的岸线有周家湾一套口、沟口-老湖塔和谭家沟-马船沟三段。最后结合安庆市经济发展背景、区位条件对安庆沿江岸线资源开发分段提出若干建议。     

基于指标模糊权和协调性下的地下水水质评价模型构建及应用

在地下水质量标准中,各指标权重的选择与权重的内涵存在着不确定性;同一指标的分级界点值差异显著,近似地呈现几何级数变化。基于以上这两种情况,构建基于指标模糊权和协调性下的地下水水质评价模型。应用层次分析法和专家调查9标度法确定指标的相对权重,结合贝塔系数计算出指标的模糊权重。对评价标准及待评价地下水水质监测值进行对数变换,采用距离测度法来构造隶属函数,并对其进行求余,按最大隶属原则来评判地下水质量等级。应用此模型对徐州市的重要水源地——张集地下水水质进行评价。结果表明:研究区的20个采样点水质为Ⅱ、Ⅲ级的占90%,符合饮用水的要求。与投影寻踪法的评价结果基本一致。     

高速公路雨水径流重金属污染初期效应

通过对8场降雨高速公路路面雨水径流中溶解态和颗粒态Cd、Cu、Pb和Zn 4种重金属进行现场取样检测,在定性分析径流重金属污染初期效应存现的基础上,定量分析了重金属污染初期效应的显著程度,并探讨了降雨特征对径流重金属污染初期效应的影响.无因次累积负荷分数-累积体积分数曲线分析结果表明,大多数降雨事件中总重金属存在较显著的初期效应,除溶解态Pb不具有初期效应外,其余溶解态与颗粒态重金属均存在较显著的初期效应.少数降雨事件的径流在中后期存在二次冲刷效应.初期冲刷比值分析结果表明,拦截并处理径流初期25%流量(径流的体积分数,下同)可去除整个降雨事件中所排放的35%～39%(质量分数,下同)的重金属污染负荷.总重金属初期效应的显著程度顺序如下:Cd>Cu>Zn>Pb;溶解态重金属初期效应的显著程度顺序如下:Cd>Zn>Cu>Pb;颗粒态重金属初期效应的显著程度顺序为:Cu>Cd>Pb>Zn.重金属初期冲刷比值与降雨特征相关性分析表明,平均降雨强度对径流重金属污染负荷初期效应的影响显著,降雨历时、降雨量、前期晴天数和产流时间对径流重金属污染负荷初期效应的影响较小.