不同区域城市空气O3和PM2.5累积速率时序模型

利用2017—2018年全国7个区域10个典型城市环境空气O₃和PM_2.5浓度数据，统计污染物累积速率，进而采用回归方法拟合污染物浓度及其累积速率的时间序列模型，分析不同区域污染物时序变化特征差异。结果表明：不同区域O₃浓度时序曲线拟合程度总体高于PM_2.5，石家庄O₃拟合程度最高，西安PM_2.5拟合程度最高。以07：00、14：00分别作为O₃、PM_2.5模拟起点是24 h中的最优模型。不同城市夏季O₃小时浓度时序变化曲线均为单峰形态，O₃浓度及累积速率峰值出现时间可能由城市所处经度决定，太原O₃累积最快，西安O₃消解最快。各城市间冬季PM_2.5小时浓度及其累积速率时序变化曲线形态差异较大，沈阳PM_2.5累积和消解均最快。与浓度相比，城市环境空气O₃和PM_2.5累积速率与光照、扩散条件等有更好的时间相关性。     

海河下游水体中DO与NH_3-N、COD_(Mn)相关关系探讨

本文应用近年来海河下游监测数据对ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ进行一元线性回归，得到两回归方程：ＮＨ３Ｎ＝－１２８ＤＯ＋１０５４；ＣＯＤＭｎ＝－１１３ＤＯ＋１６９２。并经相关系数和回归系数显著性检验，表明在９９９％的置信水平下ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ线性相关均极其显著     

连续采样与五日法采样效果及费用的对比分析

通过对连续采样与五日法采样五种方法监测结果及所需费用的比较，得出连续采样方法监测结果更具有代表性，合理性，一次性投资大，但运行费用并不高的结论。     

锅炉环境影响评价系统软件研究

用Ｃ语言作为开发语言，研制开发了锅炉环境影响评价系统软件，软件充分利用Ｃ语言模块化，过程化的优点，源程序由１２个模块组成。经编译连接生成一个可执行程序，用户只需输入１５个必需的原始参数，软件即可自动查询，计算大量的中间参数，并立即给出污染源强及污染物在周围环境中分布的预测和评价结果。     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

Development of an ombrotrophic peat bog (low ash) reference material for the determination of elemental concentrations

Given the increasing interest in using peat bogs as archives of atmospheric metal deposition, the lack of validated sample preparation methods and suitable certified reference materials has hindered not only the quality assurance of the generated analytical data but also the interpretation and comparison of peat core metal profiles from different laboratories in the international community. Reference materials play an important role in the evaluation of the accuracy of analytical results and are essential parts of good laboratory practice. An ombrotrophic peat bog reference material has been developed by 14 laboratories from nine countries in an inter-laboratory comparison between February and October 2002. The material has been characterised for both acid-extractable and total concentrations of a range of elements, including Al, As, Ca, Cd, Cr, Cu, Fe, Hg, Mg, Mn, Na, Ni, P, Pb, Ti, V and Zn. The steps involved in the production of the reference material (i.e. collection and preparation, homogeneity and stability studies, and certification) are described in detail.     

辽河流域浑河沈阳段地表水重点控制有机污染物的筛选

采用美国环保局工业环境实验室提出的化学物质的“潜在危害指数法”,对辽河流域浑河沈阳段地表水和底质中检出的有机污染物的潜在危害进行了排序,参考国内外有毒化学品优先控制名单的筛选原则和方法,结合本流域的实际情况,制定出重点控制有机污染物的评分标准,提出辽河流域浑河沈阳段重点控制有机污染物名单。考虑到个别有机污染物在水中的浓度很低,但在底质中相对含量较高,所以将底质的检测结果也纳入评分标准。     

离子交换树脂光度法测定微量铁的研究

研究了以阳离子交换树脂为显色载体，利用直接吸附在树脂上有色络合物－Fe(II)邻二氮菲的吸光度，借以检测水和火腿肠中铁的新方法，本法具有比原子吸收法更高的灵敏度，稳定性和选择性，并对成络及树脂吸附条件作了较详细研究。     

我国污染源在线监测现状及建议

文章在对国内重点城市污染源在线监测调查研究的基础上 ,分析总结了国内污染源在线监测的经验和教训 ,提出了推进污染源在线监测的建议     

Degradation of Pesticides on Plant Surfaces and its Prediction - A Case Study on Tea Plant

The degradative kinetics of pesticides on plant surface are characterized by an initial rapid degradation which follows a first-order kinetics, then transferred to a more slower degradative rate. The degradative process mainly consists of photodegradation, evaporation, rainfall elution and growth dilution. The influencing parameters of these processes were investigated by using the tea plant as a case study. The predictive model of the initial concentration, photodegradation rate constant, evaporation rate constant, rainfall elution rate, growth dilution rate and the total degradation rate was discussed and verified in four locations situated in the range of 25°-30°N latitude, and acceptable results were obtained.