SO3烟气调质+电除尘在大型燃煤机组上的应用

大型燃煤机组由于耗煤量巨大,在设计时均考虑了多煤种的情况,但电除尘器对不同煤种燃烧后产生的煤灰的收尘性能差异很大。针对多煤种设计工况,以广东平海电厂为例,SO3烟气调质+电除尘器组合技术既能满足燃烧多煤种时的低排放要求,又具备了较低的一次性投资和较低的运行费,是一种最佳的除尘方案,该项目对同类工程除尘方案的选型推广具有积极的示范及借鉴意义。     

基于BP神经网络的儿童卧室内灰尘PAEs浓度预测

在实测数据的基础上,以邻苯二甲酸酯(PAEs)的各类影响因素为自变量,PAEs浓度为因变量,采用Back-propagation(BP)神经网络建立儿童卧室内PAEs浓度预测模型.结果表明,该模型的预测效果较理想,其中,STD比值均＞0.5,NMB均接近0,EMR均＜19％.以室内环境与儿童健康(CCHH)课题组天津地...     

A comparative study of vocational education and occupational safety and health training in China and the UK

In order to enhance Chinese workers’ occupational safety awareness, it is essential to learn from developed countries’ experiences. This article investigates thoroughly occupational safety and health (OSH) in China and the UK; moreover, the article performs a comparison of Chinese and British OSH training-related laws, regulations and education system. The following conclusions are drawn: China’s work safety continues to improve, but there is still a large gap compared with the UK. In China a relatively complete vocational education and training (VET) system has been established. However, there exist some defects in OSH. In the UK, the employer will not only pay attention to employees’ physiological health, but also to their mental health. The UK’s VET is characterized by classification and grading management, which helps integrate OSH into the whole education system. China can learn from the UK in the development of policies, VET and OSH training.     

Evaluation of geometrically personalized THUMS pedestrian model response against sedan–pedestrian PMHS impact test data

Objective: Evaluating the biofidelity of pedestrian finite element models (PFEM) using postmortem human subjects (PMHS) is a challenge because differences in anthropometry between PMHS and PFEM could limit a model's capability to accurately capture cadaveric responses. Geometrical personalization via morphing can modify the PFEM geometry to match the specific PMHS anthropometry, which could alleviate this issue. In this study, the Total Human Model for Safety (THUMS) PFEM (Ver 4.01) was compared to the cadaveric response in vehicle–pedestrian impacts using geometrically personalized models.

Methods: The AM50 THUMS PFEM was used as the baseline model, and 2 morphed PFEM were created to the anthropometric specifications of 2 obese PMHS used in a previous pedestrian impact study with a mid-size sedan. The same measurements as those obtained during the PMHS tests were calculated from the simulations (kinematics, accelerations, strains), and biofidelity metrics based on signals correlation (correlation and analysis, CORA) were established to compare the response of the models to the experiments. Injury outcomes were predicted deterministically (through strain-based threshold) and probabilistically (with injury risk functions) and compared with the injuries reported in the necropsy.

Results: The baseline model could not accurately capture all aspects of the PMHS kinematics, strain, and injury risks, whereas the morphed models reproduced biofidelic response in terms of trajectory (CORA score = 0.927 ± 0.092), velocities (0.975 ± 0.027), accelerations (0.862 ± 0.072), and strains (0.707 ± 0.143). The personalized THUMS models also generally predicted injuries consistent with those identified during posttest autopsy.

Conclusions: The study highlights the need to control for pedestrian anthropometry when validating pedestrian human body models against PMHS data. The information provided in the current study could be useful for improving model biofidelity for vehicle–pedestrian impact scenarios.     

火焰脉动在火灾领域相关研究进展

为研究火焰脉动在火灾领域相关研究进展,总结了不同燃料类型的火焰脉动形成机理,较为详细地介绍了火焰脉动现象研究中常用的脉动频率测量方法,列举了LDV、TDLAS、自由基团高频采集等新方法;介绍了池火脉动、射流/羽流气体火脉动在不同燃烧器尺寸,不同外部环境和不同燃料比等影响因素方面的研究内容与进展;对常见的3种不同的火焰脉动模型进行描述和归类;对火焰脉动的规律、机理等在火灾领域的早期识别和检测中的作用、特殊条件对于火焰脉动频率的影响和更加精细的火焰脉动模型的研究等方向提出展望。     

共代谢条件下丁基黄药的生物降解实验研究

微生物共代谢是降解废水中难降解有机物的重要方式。通过实验研究,比较了以丁基黄药作为唯一碳源和能源以及有共代谢基质存在下丁基黄药的降解过程。结果表明,共代谢显著提高了丁基黄药的降解率。在25℃条件下,以丁基黄药为唯一碳源和能源时,其降解率仅为43.1%;而利用葡萄糖作为共代谢基质,当葡萄糖质量浓度为0.20g/L时,振荡培养72h后丁基黄药的降解率可达65.2%;再加入微量的蛋白胨作为氮源后,丁基黄药的降解率可提高到73.5%;加入共代谢基质后微生物的适应期由原来的36h缩短至24h。共代谢是提高丁基黄药生物降解性能的一条有效途径。     

维生素和酮苷生产废水中难降解污染物的溯源研究

研究了维生素和酮苷生产过程中各生产工段排水的生物降解特性,评价了各生产工段对生产废水中难降解有机物的贡献率,追溯了可能的难降解特征污染物。结果表明,维生素生产废水中的难降解物质主要来自W1-1、W1-3、W1-5和W1-6生产工段,甲醛、丁烯酮、醛酮聚合物和吡啶可能是导致生产废水难降解的重要原因;酮苷生产废水中的难降解物质主要来自W2-1、W2-3和W2-7生产工段,氯代有机溶剂和苯环类物质可能是导致生产废水难降解的重要原因。建议根据具体生产工段排水的水质特征,有针对性地进行物化处理,提高废水可生化性。     

颗粒物对无电压作用下离子交换膜分离去除铜离子的影响

在无外加电压条件下研究了颗粒物对阳离子交换膜分离去除铜离子效果的影响。选用硅酸、二氧化硅、氧化铝和水杨酸等4种物质作为颗粒物分别进行实验,其添加量均为50 mg/L。Cu2+及其补偿离子K+的浓度分别为0.0787mmol/L(5 mg/L)和0.787 mmol/L,水温为25±1℃,搅拌强度为600 r/min,水力停留时间为12 h。在所述实验条件下运行96 h后,水中无颗粒物干扰时,铜离子去除率为84%;水中存在带负电荷颗粒物(硅酸)和不带电荷颗粒物(二氧化硅和氧化铝)时,铜离子去除率略为下降至81%;而当水中存在带正电荷颗粒物(水杨酸)时,铜离子的去除率进一步下降为79%。研究结果表明带正电荷颗粒物对铜离子的交换去除影响较带负电荷或不带电荷颗粒物大,因为带正电荷颗粒物更易迁移至阳离子交换膜表面甚至进入膜内,并与膜表或膜内离子交换基团结合,从而导致铜离子交换去除明显下降。     

壳聚糖改性粘土对高藻水中藻类的絮凝去除

对壳聚糖改性粘土用于天然高藻水中藻类的絮凝去除进行了研究。实验表明,经壳聚糖改性后的粘土对高藻水中藻细胞有较好的去除效果。粘土的种类对除藻效果有一定影响,其中以高粘凹凸棒石为最佳,其最佳投加量为66mg/L(壳聚糖6 mg/L),此时的叶绿素去除率达到95.45%。相比单独投加壳聚糖,粘土的加入增加了絮体密实度,减少了絮体体积,并使絮体分布更均匀。粘土的粒径对絮凝效果基本没有影响,粒径范围在25～74μm时,改性粘土对藻细胞的凝聚效果是一致的。经壳聚糖改性的粘土在酸性条件下絮凝效果较好,当pH值大于7时,其絮凝能力迅速下降。     

两阶段曝气生物滤池的硝化性能

曝气生物滤池(BAF)是近年来受到广泛关注的一种新型污水处理技术,具有占地面积少、投资费用低、处理效率高、出水水质好等优点。现已被应用于许多污水处理厂的二级处理、深度处理以及污水的回用。实验以陶粒为填料,自行设计了升流式两阶段BAFs(UBAFs)处理模拟生活污水,考察了反应器运行条件对COD与氨氮去除影响,并探讨了UBAFs反应器内氮流失及同步硝化反硝化情况。结果表明,UBAFs对生活污水处理具有良好的净化效果。在进水COD和氨氮浓度分别为200~363 mg/L和16.8~31.3 mg/L条件下,UBAFs处理出水水质均达到《城市污水再生利用城市杂用水水质》(GB/T 18920-2002)标准,能够满足回用要求。通过采用氮平衡分析方法和借助电子扫描电镜技术,初步认为UBAFs反应器脱氮方式是由于在UBAFs第一阶段局部厌氧环境中以传统方式进行硝化反硝化脱氮,第二阶段是在好氧条件下,异养好氧硝化菌的同步硝化反硝化脱氮。