从废感光胶片中回收银

研究了以Fe3 -乙二胺四乙酸二钠-N a2S2O3体系为浸取剂从废感光胶片中回收银的方法,考察了浸出银的最佳工艺条件。实验表明,当浸取剂中FeC l3.6H2O质量浓度为35g/L、N a2S2O3.5H2O质量浓度为150g/L、pH为7、固液质量比为3∶10时,浸取剂可重复使用6次,胶片上银的浸出率可达99%以上;浸取液中的银采用硼氢化钠还原回收,粗银粉配以熔剂高温熔炼可得到纯度达99.78%的银,银回收率达96.88%,回收银后的浸取液可循环使用。     

树脂吸附-Fenton试剂氧化法处理水杨醛生产废水

采用树脂吸附-Fenton试剂氧化法处理水杨醛生产废水。XF-01树脂和XF-02树脂静态吸附水杨醛生产废水时,COD去除率均在85％以上,挥发酚去除率均高于90％。XF-02树脂对水杨醛生产废水的处理效果更佳。动态吸附随废水流量增大,吸附出水的COD和挥发酚质量浓度均增加。适宜的废水流量为15BV,树脂的最佳脱附温度为80℃。在连续4批的吸附-脱附实验中,吸附出水的平均COD约为1200mg／L,平均挥发酚质量浓度小于10mg／L。在Fenton试剂氧化中,铁屑和铁粉的催化效果差别很小,都好于FeSO4·7H2O。以铁屑为催化剂、H2O2溶液加入量为1％时,氧化出水的COD小于150mg／L,挥发酚质量浓度小于0．5mg／L。     

基于信息量⁃Scoops3D联合模型的地质灾害易发性评价∗

贵渝管道沿线地势险峻、构造活跃、雨量集中,崩滑流等地质灾害十分发育,科学开展管道沿线地质灾害的易发性评估工作对确保其安全运行至关重要。本研究在查明管道沿线自然地质环境及地质灾害分布的基础上,结合管道沿线地形地质特征、管道展布与斜坡体的相互空间位置关系划分了 101 段适合管道工程特点的评价单元,基于信息量数理统计模型与 Scoops3D 物理力学模型对管道沿线地质灾害的易发性进行了评价。评价结果表明管道沿线地质灾害的高易发区主要集中在遵义及桐梓县附近,其中 7 段处于极高易发区,26 段处于高易发区,20 段处于中易发区,30 段处于低易发区,18 段处于极低易发区。通过 ROC 曲线分别求得信息量、Scoops3D 以及二者联合模型的 AUC 值分别为 0.796、0.683 和 0.803,结果表明信息量-Scoops3D 联合模型的评价准确性最高。     

对生态旅游开发的法律保障

本文从法律角度探讨如何规范旅游开发行为，从而实现旅游业的可持续发展。     

典型行业再利用土壤重金属含量分布、来源解析及生态风险评价

为深入探究典型行业再利用土壤重金属污染特征及生态风险状况,基于上海市嘉定区49个地块315个不同深度剖面土壤样品数据,采用地累积指数和潜在生态风险指数评估Cd、Pb、Cu、Zn、Ni、Hg和As这7种重金属含量特征和潜在生态风险程度,并利用源解析受体模型（APCS-MLR）和正定矩阵因子分解模型（PMF）解析其污染来源.结果表明：①研究区土壤中除As外,其余重金属均不同程度超过上海市土壤背景值,表层土壤中Cd、Pb、Cu、Zn、Ni和Hg含量分别是背景值的3.54、2.34、2.91、1.20、3.75和4.40倍;7种重金属含量随着土壤垂直剖面深度的增加逐渐降低,重金属在表层土壤中存在一定程度的富集,人类活动影响了重金属在土壤中的分布规律.②研究区内APCS-MLR和PMF两种受体模型均识别出土壤重金属4种主要来源,源1（Cu、Zn和Pb）为金属制品和汽车制造混合源,源2（Ni和Cd）为电镀企业来源,源3（Hg）主要为化工企业来源,源4（As）为自然源,两种受体模型结合运用,进一步提高源解析的精准度和可信度.③地累积指数由大到小表现为：Hg（1.54）>Ni（1.32）>Cd（1.21）>Cu（0.96）>Pb（0.64）>Zn（-0.33）>As（-1.02）;潜在生态风险指数结果显示,研究区综合潜在生态风险指数RI值在32.50~4 910.97,均值为321.40,整体呈现较强潜在生态风险,再开发利用工业场地土壤中重金属Hg、Ni和Cd的污染值得进一步关注.     

天津市中心城区集中供应管网末梢水的抗生素耐药基因污染特征研究

为了研究天津市中心城区集中供应管网末梢水的抗生素耐药基因(antibiotic resistance genes,ARGs)污染特征,采集了天津市中心城区6个采样点的管网末梢水样,分别采用微孔滤膜正压过滤法及核酸吸附-洗脱法富集水中细菌和胞外核酸后,利用实时定量PCR技术对15种胞内ARGs和胞外ARGs进行定量检测....     

Diurnal and spatial variations of soil NOx fluxes in the northern steppe of China

NO_x emissions from biogenic sources in soils play a significant role in the gaseous loss of soil nitrogen and consequent changes in tropospheric chemistry. In order to investigate the characteristics of NO_x fluxes and factors influencing these fluxes in degraded sandy grasslands in northern China, diurnal and spatial variations of NO_x fluxes were measured in situ. A dynamic flux chamber method was used at eight sites with various vegetation coverages and soil types in the northern steppe of China in the summer season of 2010. Fluxes of NO_x from soils with plant covers were generally higher than those in the corresponding bare vegetation-free soils, indicating that the canopy plays an important role in the exchange of NO_x between soil and air. The fluxes of NO_x increased in the daytime, and decreased during the nighttime, with peak emissions occurring between 12:00 and 14:00. The results of multiple linear regression analysis indicated that the diurnal variation of NO_x fluxes was positively correlated with soil temperature (P < 0.05) and negatively with soil moisture content (P < 0.05). Based on measurement over a season, the overall variation in NO_x flux was lower than that of soil nitrogen contents, suggesting that the gaseous loss of N fromthe grasslands of northern China was not a significant contributor to the high C/N in the northern steppe of China. The concentration of NO_x emitted from soils in the region did not exceed the 1-hr National Ambient Air Quality Standard (0.25 mg/m³).     

Visible-light-driven photocatalytic inactivation of bacteriophage f2 by Cu-TiO2 nanofibers in the presence of humic acid

Pathogenic viruses in drinking water are great threats to public health. Visible-light-driven photocatalysis is a promising technology for virus inactivation. However, the existing photocatalytic antiviral research studies have mostly been carried out in single-component systems, neglecting the effect of natural organic matter, which exists widely in actual water bodies. In this paper, electrospun Cu-TiO₂ nanofibers were prepared as photocatalysts, and their photocatalytic antiviral performance in the presence of humic acid (HA) was comprehensively studied for the first time. The properties of the reaction mixture were measured during the reaction. In addition, the safety, reliability and stability of photocatalytic disinfection in the mixed system were evaluated. The results showed that the virus removal efficiency decreased with the increase of the HA concentration. The type of reaction solution, such as PBS buffer solution or water, did not affect the removal efficiency noticeably. Under acidic conditions, the electrostatic forces between photocatalysts and viruses were strengthened, leading to higher virus removal efficiency. As the reaction time went on, the pH value in the solution increased first and then tended to be stable, the conductivity remained stable, and the dissolved oxygen increased first and then decreased. The safety test showed that the concentration of Cu ions released into the solution was lower than specified by the international standards. No photoreactivation was observed, and the addition of HA significantly reduced the reutilization efficiency of the photocatalysts.