Characterization of the e ective cellulose degrading strain CTL-6

An e cient cellulose degrading bacteria exists in the thermophilic wheat straw-degrading community, WDC2. However, this strain cannot be isolated and cultured using conventional separation techniques under strict anaerobic conditions. We successfully isolated a strain of e ective cellulose degrading bacteria CTL-6 using a wash, heat shock, and solid-liquid alternating process. Analysis of its properties revealed that, although the community containing the strain CTL-6 grew under aerobic conditions, the purified strain CTL-6 only grew under anaerobic culture conditions. The strain CTL-6 had a striking capability of degrading cellulose (80.9% weight loss after 9 days of culture). The highest e ciency value of the endocellulase (CMCase activity) was 0.404 mol/(min mL), cellulose degradation e ciency by CTL-6 was remarkably high at 50–65°C with the highest degradation e ciency observed at 60°C. The 16S rRNA gene sequence analysis indicated that the closest relative to strain CTL-6 belonged to the genus Clostridium thermocellum. Strain CTL-6 was capable of utilizing cellulose, cellobiose, and glucose. Strain CTL-6 also grew with Sorbitol as the sole carbon source, whereas C. thermocellum is unable to do so.     

Denitrification of coking wastewater with micro-electrolysis

The denitrification for the coking wastewater was conducted by means of original battery principle with Fe-C micro-electrolysis. Fe-C serves as positive and negative electrodes, by which N0₂^?-N and TN were reduced to nitrogen, and then the purpose of denitrifieation for coking wastewater was realized. The influences of pH value, carbon particle size, Fe/C ratio (mass ratio), reaction time and coagulation pH value on removal rate of N0₂^?-N and TN were investigated. Coking wastewater originated from Jiamusi Coal Chemistry Engineering Company. The optimum conditions of treatment were as follows: the initial pH was 3.0, the dosage of Fe 73.5 g/L, reaction time 70 min, mass ratio of Fe/C ratio 1.0:1.3, coagulation pH 9.0 and sedimentation time 40 min. Under those conditions, nitrogen removal efficiencies of N0₂^?-N and TN were beyond 50% and 45%, respectively.     

Macroscale and microscale analysis of Anammox in anaerobic rotating biological contactor

Inoculated with conventional anaerobic activated sludge, the Anammox process was successfully developed in an anaerobic rotating biological contactor (AnRBC) fed with a low ratio of C/N synthetic wastewater. Operated in a single point feed mode, the AnRBC removed 92.1% (n = 126) of the influent N at the highest surface load of 12 g/(m².day). The biomass increased by 25% and 17.1 g/(m².day) of maximum N removal surface load was achieved by elevating flow rate with another feed point. Fluorescence in situ hybridization and polymerase chain reaction analysis indicated that the Anammox genus Candidatus Kuenenia stuttgartiensis dominated the community. Both Anammox and denitrifying activity were detected in biofilm by the application of microelectrodes. In the outer layer of the biofilm (0-2500 μupm), nitrite and ammonium consumed simultaneously in a ratio of 1.12/1, revealing the occurrence of Anammox. In the inner layer (> 2500 μupm), a decrease of nitrate was caused by denitrification in the absence of nitrite and ammonium.     

硫磺安全仓储关键技术

介绍了硫磺火灾爆炸机理,并对硫磺仓储系统的危险性进行了分析。结合相关实验数据,提出了仓库设计、工艺运行、事故预防中的安全措施,以保证硫磺散装系统能够安全、长周期平稳运行。     

川东北地区天然气勘探清洁生产技术措施分析

对川东北地区天然气勘探过程中的几项清洁生产技术措施进行了初步的分析,确定在取得良好的经济效益的同时,实现勘探过程中废弃物"减量化、无害化、资源化"的清洁生产目标,降低了勘探过程中的环境风险,同时也产生了良好的社会效益。     

浅谈环境监测实验室前期内部设计过程中应注意的问题

文章结合作者自己站环境监测实验室建设的实际,提出了环境监测实验室建设的原则和理念,明确了实验室建设内部设计过程,并对环境监测实验室初期内部设计应关注的地方进行了阐述,给以后的环境监测实验室建设内部设计提供必要的借鉴。     

遵化地质灾害发育特征及其防治措施

为了查明遵化市地质灾害分布规律和发生机制,通过野外实际调查和搜集相关资料等方法,对辖区内各种地质灾害进行了细致的分析和研究,阐述了产生地质灾害的地质条件和诱发因素,并对今后地质灾害的发展趋势做了可靠性的预测,对地质灾害防治提出建设性意见。遵化市地质灾害以地面塌陷和泥石流危害最大,其防治措施应以预防为主,加强监管力度,并积极做好工程防治工作。     

A two-stage inexact joint-probabilistic programming method for air quality management under uncertainty

A two-stage inexact joint-probabilistic programming (TIJP) method is developed for planning a regional air quality management system with multiple pollutants and multiple sources. The TIJP method incorporates the techniques of two-stage stochastic programming, joint-probabilistic constraint programming and interval mathematical programming, where uncertainties expressed as probability distributions and interval values can be addressed. Moreover, it can not only examine the risk of violating joint-probability constraints, but also account for economic penalties as corrective measures against any infeasibility. The developed TIJP method is applied to a case study of a regional air pollution control problem, where the air quality index (AQI) is introduced for evaluation of the integrated air quality management system associated with multiple pollutants. The joint-probability exists in the environmental constraints for AQI, such that individual probabilistic constraints for each pollutant can be efficiently incorporated within the TIJP model. The results indicate that useful solutions for air quality management practices have been generated; they can help decision makers to identify desired pollution abatement strategies with minimized system cost and maximized environmental efficiency.     

The function of constructed wetland in reducing the risk of heavy metals on human health

Irrigation with polluted water from the upper Yellow River (YR) channel of Northwest China has resulted in agricultural soil being contaminated by heavy metals (HMs). This causes major concerns due to the potential health risk to the residents in this area. The present study aims to assess the efficiency of constructed wetland (CW) in reducing the heavy metal contamination in irrigation water and food crops, thus in reduction of potential health risk to the residents. The associated risk was assessed using hazard quotient (HQ) and hazard index (HI). The results showed a potential health risk to inhabitants via consumption of wheat grain irrigated with untreated water from YR. However CW could greatly reduce the human health risk of HMs contamination to local residents through significantly decreasing the concentrations of HMs in wheat grain. In theory, the reduction rate of this risk reached 35.19% for different exposure populations. Therefore, CW can be used as a system to pre-treat irrigation water and protect the residents from the potential HMs toxicity.     

One-pot molten salt method for constructing CdS/C3N4 nanojunctions with highly enhanced photocatalytic performance for hydrogen evolution reaction

The construction of heterojunction photocatalysts for efficiently utilizing solar energy has attracted considerable attention to solve the energy crisis and reduce environmental pollution. In this study, we use the energy released from an easily-occurred exothermic chemical reaction to serve as the drive force to trigger the formation of Cd S and C₃N₄ nanocomposites which are successfully fabricated with cadmium nitrate and thiourea without addition of any solvents and prot...