湖南木兰科植物资源的调查研究

本文分析了湖南木兰科分布的自然条件,结合其形态性状讨论了它们的分类学问题、地理分布特点、资源状况以及自然生长状况。文末提出了湖南省木兰科的保护植物名单。     

镉污染土壤对潜在能源植物生长的影响

利用重金属污染土壤种植能源植物是一种同时解决环境问题和能源问题的新理念,但目前相关研究成果并不多。通过盆栽试验研究人工镉污染土壤中象草Pennisetumpurpureum和亚香茅Cymbopogonnardus两种植物植株的生长状况和两种植物对土壤镉的吸收和富集能力。结果表明,当外源可溶性镉加入到土壤后,其主要是以生物有效性较高的状态存在。土壤镉对象草和亚香茅生长的影响作用有很大的不同,亚香茅比象草具有更强的镉耐受力,其生物量受镉污染影响小。两种植物植株镉含量均随土壤镉添加量的增加而增加。除高镉处理象草外,植物地下部分含镉量比地上部分高很多。高镉处理象草地下部分含镉量比地上部分低的现象可能反映出根系已积累了太多的镉,因而加速了向地上部的转移,从而加剧了植物中毒的程度。赤泥添加剂具有降低土壤酸度,减少植物对镉的吸收和增加象草和亚香茅生物量的作用。     

城镇生活污水就近引浇防沙治沙工程林

城镇生活污水排入水体 ,严重影响水资源的使用价值。沙漠地区因缺水 ,造成许多地方造林失败。本文提出了将城镇生活污水就近引浇防沙治沙工程林的构想 ,并从经济和环境影响两个方面详细论述了该方案的比较优势     

超临界水氧化有机废水动力学分析

根据推流式超临界水氧化 (SCWO)反应器处理有机废水的动力学方程式 ,结合近年来超临界水氧化降解各种有机废水的实验研究情况 ,对超临界水氧化有机废水的反应动力学影响因素进行了综合分析 ,同时指出了该技术在有机废水处理中的应用优势和存在问题。     

二相厌氧-混凝法处理制浆造纸综合废水的工艺设计及调试

湖南某造纸厂采用二相厌氧 混凝法处理制浆造纸综合废水取得了显著效果 ,CODCr排放总量削减率达 80 % ,水体水质明显改善。本文介绍了该工程的工艺设计及调试。     

湿热法处理实现厨余垃圾饲料化的研究

探索了湿热法工艺处理厨余垃圾并将其饲料化的可行性.实验表明,湿热法处理可以在满足消毒杀菌的同时,降低厨余原料中的高油脂含量和高含盐量,调节营养成分,实现物化性状的均一.经湿热法处理后的厨余垃圾的饲用价值得到明显改善,可作为良好的饲料原料,同时可回收利用油脂.总之,湿热法工艺可实现厨余垃圾的无害化、减量化和资源化处理,对于消除环境污染、缓解我国饲料原料紧张及资源回收利用等方面有着显著的环境效益、社会效益和经济效益,具有重要的现实意义.     

"老龄期"填埋场渗滤液COD蒸发规律研究

"老龄期"填埋场渗滤液由于可生化性差而难于处理.采用常规蒸发、减压蒸发和载气蒸发处理不同pH值的"老龄期"渗滤液.实验结果表明,3种蒸发方式下,冷凝液COD下降过程中均存在明显的浓度转折点,转折点之后COD维持较低水平,为"老龄期"渗滤液的"三分处理法"提供理论依据.与常规蒸发相比,减压蒸发和载气蒸发的前期冷凝液COD较高,且浓度转折点偏后.     

Municipal solid waste characteristics and management in China

The purpose of this investigation is to evaluate the current status and identify the problems of municipal solid waste (MSW) management in China in order to determine appropriate remedial strategies. This is the first of two papers, discussing primarily the general characteristics of MSW and its management in China. The second paper focuses on specific remedial strategies. MSW generation in China has increased rapidly in the past 20 years from 31.3 million tons in 1980 to 113.0 million tons in 1998. The annual rate of increase is 3-10%. The average generation per capita is 1.0 kg/day (0.38 t/year). Nearly one-half of the waste generated is dumped in the suburbs, where the accumulated quantity has reached 6 billion tons, which has caused heavy environmental pollution. This paper provides information on MSW management in China, such as MSW generation and its physical, chemical, and biological properties. Low calorific value and high moisture content characterize China's municipal waste. Other issues related to MSW management in China are also discussed, including the factors that influence MSW generation quantity and     

苯胺废水处理技术研究进展

综述了有毒、难生物降解废水———苯胺废水的各种处理技术及基本原理 ,这些处理技术主要包括物理、化学、生物等方法     

A comprehensive classification method for VOC emission sources to tackle air pollution based on VOC species reactivity and emission amounts

In China, volatile organic compound(VOC) control directives have been continuously released and implemented for important sources and regions to tackle air pollution. The corresponding control requirements were based on VOC emission amounts(EA), but never considered the significant differentiation of VOC species in terms of atmospheric chemical reactivity. This will adversely influence the effect of VOC reduction on air quality improvement. Therefore,this study attempted to develop a comprehensive classification method for typical VOC sources in the Beijing–Tianjin–Hebei region(BTH), by combining the VOC emission amounts with the chemical reactivities of VOC species. Firstly, we obtained the VOC chemical profiles by measuring 5 key sources in the BTH region and referencing another 10 key sources, and estimated the ozone formation potential(OFP) per ton VOC emission for these sources by using the maximum incremental reactivity(MIR) index as the characteristic of source reactivity(SR). Then, we applied the data normalization method to respectively convert EA and SR to normalized EA(NEA) and normalized SR(NSR) for various sources in the BTH region.Finally, the control index(CI) was calculated, and these sources were further classified into four grades based on the normalized CI(NCI). The study results showed that in the BTH region,furniture coating, automobile coating, and road vehicles are characterized by high NCI and need to be given more attention; however, the petro-chemical industry, which was designated as an important control source by air quality managers, has a lower NCI.