Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires

Used tires were pyrolyzed in a pilot-scale quasi-inert rotary kiln. Influences of variables, such as time, temperature, and agent flow, on the activation of obtained char were subsequently investigated in a laboratory-scale fixed bed. Mesoporous pores are found to be dominant in the pore structures of raw char. Brunauer-Emmett-Teller (BET) surfaces of activated chars increased linearly with carbon burnoff. The carbon burnoff of tire char achieved by carbon dioxide (CO2) under otherwise identical conditions was on average 75% of that achieved by steam, but their BET surfaces are almost the same. The proper activation greatly improved the aqueous adsorption of raw char, especially for small molecular adsorbates, for example, phenol from 6 to 51 mg/g. With increasing burnoff, phenol adsorption exhibited a first-stage linear increase followed by a rapid drop after 30% burnoff. Similarly, iodine adsorption first increased linearly, but it held as the burnoff exceeded 40%, which implied that the reduction of iodine adsorption due to decreasing micropores was partially made up by increasing mesopores. Both raw chars and activated chars showed appreciable adsorption capacity of methylene-blue comparable with that of commercial carbons. Thus, tire-derived activated carbons can be used as an excellent mesoporous adsorbent for larger molecular species.     

保护性开发——江苏新型工业化的战略选择

江苏是实施工业化战略较早的省份,由于经济发达,造成环境污染问题突出,因此,从各个层面阐述污染与发展的关系,提出解决的措施,走保护性开发的新型工业化路子,努力建设环境友好型、资源节约型的和谐经济社会.     

Lead removal from synthetic leachate matrices by a novel ion-exchange material

This paper discusses the application of a novel polyacrylate-based ion-exchange material for the removal of Pb ions from water. Preliminary testing includes the establishment of the operating pH range, capacity information, and the effect of Ca2+ and anions in the matrix. Batch testing with powder indicates slightly different optimal operational conditions from those used for column testing. The ion-exchanger is excellent for removing Pb from aqueous solutions.     

盘式曝气器的结构优化设计

盘式曝气器是目前城市污水处理厂主要采用的曝气设备之一.但目前盘式曝气器存在充氧能力低、阻力损失大、使用寿命短等技术问题,增加了城市污水处理厂运行成本,降低了运行效能.针对这些问题,对盘式曝气器进行了结构优化设计.通过结构优化,既改善了曝气器的抗撕裂性和自闭性,同时又提高了充氧能力,降低了曝气阻力损失.     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

可张孔曝气器曝气能耗试验研究

通过试验研究,总结出可张孔曝气阻力损失的影响因素,以优化产品的结构设计参数,降低产品在工程应用中的能耗,获取更好的经济效益。     

Simultaneous removal of nitrogen oxide/nitrogen dioxide/sulfur dioxide from gas streams by combined plasma scrubbing technology

Oxides of nitrogen (NOx) [nitrogen oxide (NO) + nitrogen dioxide (NO2)] and sulfur dioxide (SO2) are removed individually in traditional air pollution control technologies. This study proposes a combined plasma scrubbing (CPS) system for simultaneous removal of SO2 and NOx. CPS consists of a dielectric barrier discharge (DBD) and wet scrubbing in series. DBD is used to generate nonthermal plasmas for converting NO to NO2. The water-soluble NO2 then can be removed by wet scrubbing accompanied with SO2 removal. In this work, CPS was tested with simulated exhausts in the laboratory and with diesel-generator exhausts in the field. Experimental results indicate that DBD is very efficient in converting NO to NO2. More than 90% removal of NO, NOx, and SO2 can be simultaneously achieved with CPS. Both sodium sulfide (Na2S) and sodium sulfite (Na2SO3) scrubbing solutions are good for NO2 and SO2 absorption. Energy efficiencies for NOx and SO2 removal are 17 and 18 g/kWh, respectively. The technical feasibility of CPS for simultaneous removal of NO, NO2, and SO2 from gas streams is successfully demonstrated in this study. However, production of carbon monoxide as a side-product (approximately 100 ppm) is found and should be considered.     

基于SARIMA模型和普通Kriging法对杭州市主城区PM2.5短期预测和制图

基于SARIMA模型对杭州市主城区内的7个站点和周边3个站点的PM_(2.5)浓度进行4 h平均的短期预报,并利用普通Kriging法对杭州市主城区PM_(2.5)进行空间插值和制图.在建立SARIMA模型时,用批量自动化的方法,使用R语言编程对夏季和冬季各360期的数据进行SARIMA(p,d,q)×(P,D,Q)6模型的参数的确定和拟合,来预测下一期的值.在10个站点分别进行120期的预测,做出真实与预测的时间序列图,在精度分析中,夏季和冬季PM_(2.5)浓度总体的平均绝对误差(MAE)分别为8.4μg·m~(-3)和14.8μg·m~(-3).在Arc GIS中,对每期的数据使用普通Kriging法,用球面模型拟合半变异函数,决定各个站点的权重,来对杭州市区内未知空间样点进行插值,最后生成完整的杭州市主城区PM_(2.5)短期预测图.本研究创新性地将SARIMA模型广义化运用到小尺度时间序列中,预报效果较好,并且批量自动化预测和制图的方法,可为今后的预测制图产品化提供技术支持.     

我国灾害信息传播的研究现状与展望

近年来灾害事件频发,有关灾害信息传播的研究成为传播学的一个热点研究方向,目前我国灾害信息传播的研究角度众多,取得了较为丰硕的成果,但大多还只停留在个案研究层面,系统研究有待加强。本文在分析现状的基础上,提出了整合传播是我国灾害信息传播研究的新方向,并可分出传播渠道整合、传播内容整合和传媒自身整合等众多研究分支。     

1m3粉尘环境模拟装置粉尘扩散数值模拟

在工业生产环境中,粉尘云会对工作人员产生职业危害,也会对生产设备造成危害,导致生产中断甚至安全事故.电气设备在工业生产中不可或缺,研究人员为研究工业电气设备的防尘性能开发了一种1 m3粉尘环境模拟装置.该试验装置的基本功能是利用持续气流使粉尘在罐体内形成相对稳定分布的粉尘环境,其内部空间可放置电气设备进行长时间的试验.为预测粉尘在装置中的分布,利用Fluent中的离散相模型对惰性粉尘进行了粉尘环境模拟装置内扩散的数值模拟研究.结果表明,粒径为1 μm、10 μm、30 μm、50 μm和70 μm的粉尘均可以在装置内部形成粉尘云,其罐体中心质量浓度可维持在0.2～0.5 kg/m3.不同粒径的粉尘分布截然不同,粒径越小的粉尘扩散的均匀程度越高,而较大粒径粉尘的运动稳定性更好,但分布均匀度较差,保持进气速度在40 m/s以上可以获得良好的粉尘扩散效果.