The influences of recycle effect on double-pass V-corrugated solar air heaters

The study of the heat transfer enhancement for the recycling double-pass V-corrugated solar air heaters, which implement the external recycle of flowing air, was investigated experimentally and theoretically. The comparison among different designs of V-corrugated, baffled and fins attached, and flat-plate collectors was made to show the device performance improvement with various operating parameters under the same working dimensions. The recycling double-pass V-corrugated device developed here was proposed in aiming to strengthen the convective heat-transfer coefficient and enlarge the heat transfer area. The error analysis of experimental results deviate by 0.85–2.46% from the theoretical predictions with the fairly good agreement, and both results show that the device performance of the recycling double-pass V-corrugated operation is better than those of the other configurations under various recycle ratios and mass flow rates. The suitable selections were obtained for operating recycling double-pass V-corrugated devices while considering with an economic viewpoint by both the collector efficiency enhancement and the power consumption increment.     

Identification of Pollution Source of Cadmium in Soil. Application of Material Flow Analysis and A Case Study in Taiwan (11 pp)

Background Since the 1970s, at least 200 hectares (ha) of farmland has been polluted by the heavy metal cadmium (Cd).Consequently, the Cd pollution has led to contaminate the rice production and caused acute social panic. According to the recent investigation results performed by the Taiwan Environmental Protection Administration (TEPA), it is indicated that most of the Cd pollution incidents in Taiwan resulted from the wastewater discharge of stearate Cd factories. To prevent the Cd pollution incidents from spreading, the TEPA has either forced these factories to close down or assisted them in improving their production processes since the 1980s. Unfortunately, accidental incidents of Cd pollution still emerge in an endless stream, despite the strict governmental controls placed on these questionable factories. Whether this pollution has resulted from undetected or hidden pollution sources stemming from two decades ago or comes from some new source, will be an outstanding issue. Therefore, this study attempts to identify the pollution sources of Cd in soil in Taiwan as well as to find the solution to the above-mentioned, outstanding issue by way of a methodology termed Material Flow Analysis (MFA). Method logy. The MFA has proved to be a useful tool on providing quantitative information of the flow of substances through an economic to an environmental system. Based upon the supply-and-demand theory of MFA, researchers have successfully conducted an overview of the use of materials in many industries, the construction industry being one of these. Therefore, this study tries to establish a set of analytical processes by way of MFA for identifying the pollution source of Cd in soil in Taiwan. In addition, the spirit of Life Cycle Analysis (LCA) technique was also employed to identify the materials, and products should be ignored as a crucial pollution source in this study. Results and Discussion According to the MFA methodology applied in this study and on the basis of related studies performed by Taiwanese governmental authorities, we arrive at the following analysis results: (1) the total amount of Cd from the economic perspective of material and product flow was approximately 441.2 tons; (2) the wastewater directly discharged into irrigation water can be concluded to be the major pollution route of Cd in farmland soil in Taiwan; (3) material plastic stabilizer (cadmium oxide, CdO), Zn-Pd compounds and Cu compounds should be the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis; (4) the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis were five factories, Coin, Jili, Taiwan Dye, Guangzheng and Mingguan, and they were all categorized as stearate Cd industries; (5) the typical source of the Cd pollution in soil in Changhua County through the pollution route of wastewater should be the metal surfacing process industries. Conclusions This study proved that MFA can be a good tool for identifying Cd flow as well as for recognizing the crux of the problem concerning incidents of Cd pollution. This study led to the conclusion that the causal relationship between farmland pollution caused by Cd and stearate Cd factories in Taiwan seemed quite close by way of MFA methodology. In addition, this study also found that the wastewater discharged from a single metal surfacing process factory will not cause remarkable farmland pollution. However, the wastewater simultaneously discharged from a group of pollution factories can result in a significant pollution incident. Recommendations and Outlook This case study is only a small contribution to the understanding of the toxic material flow related to Cd in the environment. This study recommends that Taiwanese governmental authorities should not deal with problems on an ad hoc basis, but should instead deal with Cd pollution problems overall employing control measures. Finally, the more accurate information or data we can collect, the more reliable results we can identify. Therefore, the quality and quantity of related data used in this MFA model should be closely scrutinized in order to ensure the most correct and comprehensive investigation on the toxic material flow.     

Using micro deep drawing with ironing stages to form stainless steel 304 micro cups

The needs of stainless steel 304 micro cups have been increasing tremendously due to the trend of miniaturization in medical and electronic devices, etc. For application purpose, it is highly desired to have stainless steel micro cups with high CH/OD (cup height/outer diameter) ratios. Due to the constraints of the limit draw ratio (LDR) of stainless steel 304 sheets in micro deep drawing, forming a micro cup with high CH/OD ratio at room temperature cannot be achieved by using a single stage deep drawing die. A process consisting of one micro deep drawing and two ironing stages was proposed for achieving this goal; three micro dies were designed, fabricated and used for experimental validation. A series of experiments were conducted by using the stainless steel 304 sheets of 200 μm thickness annealed at four different temperatures to understand the influence of size effects on this process for generating knowledge, know-how and technologies to form high quality stainless steel micro cups with large CH/OD ratio. No lubricant was used in this study. It was proven that the proposed process is a robust process as long as the sheets are annealed at the temperature no less than 900 °C for more than 3 min.     

Persistence of Human Noroviruses on Food Preparation Surfaces and Human Hands

The human noroviruses (NoV) are the major cause of acute non-bacterial gastroenteritis and are commonly transmitted by foodborne routes. Epidemiological evidence from propagated outbreaks, as well as environmental sampling, suggest that these viruses are environmentally stable. The purpose of this study was to examine the persistence of representative human NoV on the fingertips of volunteers and on commonly used food preparation surfaces. Human fingerpads and surfaces (stainless steel, Formica^®, and ceramic) were inoculated with 20% fecal suspensions of Norwalk virus (NV) or Snow Mountain virus (SMV). The virus inocula were recovered by elution at serial time points ranging from 0 to 120 min post-inoculation (for fingerpads) and after up to 42 days (for surfaces). The quantity of detectable viral RNA, expressed as genome equivalent particles (GEP) was evaluated using quantitative real-time RT-PCR (RT-qPCR). The amount of NV RNA on the surface decreased gradually over time, with an average reduction ranging from 1.5 to 2.9 log₁₀ GEP after 21–28 days storage under ambient conditions. SMV showed greater environmental persistence, with a 0.4–1.2 log₁₀ GEP reduction on all three surfaces after 42 days of ambient storage. On fingerpads, the amount of human NoV RNA declined slightly (<0.25 log₁₀) after 15 min and remained relatively unchanged thereafter (through 120 min). These results support the epidemiological evidence that food preparation surfaces and human hands can act as vehicles for human NoV transmission long after the initial contamination event has occurred.     

Enantioselective effects of herbicide imazapyr on Arabidopsis thaliana

The enantioselective toxicity of chiral herbicides in the environment is of increasing concern. To investigate the enantioselective effects of the chiral herbicide imazapyr on target organisms, we exposed Arabidopsis thaliana to imazapyr enantiomers and racemate. The results show that imazapyr was enantioselectively toxic to A. thaliana. The total chlorophyll content in A. thaliana was affected more by (+)-imazapyr than (±)-imazapyr and (?)-imazapyr. Concentrations of proline and malondialdehyde reflected a toxic effect in the order of (+)-imazapyr > (±)-imazapyr > (?)-imazapyr at every concentration. Acetolactate synthase (ALS) activity was inhibited more by (+)-imazapyr than (±)-imazapyr or (?)-imazapyr. At 100 mg L^?1 of imazapyr, ALS activity was 78%, 43%, and 19% with (?)-, (±)-, and (+)-imazapyr, respectively. The results suggest the significant enantioselective toxicity of imazapyr in A. thaliana for greater toxicity with (+)-imazapyr than (±)-imazapyr and (?)-imazapyr, which suggests that (+)-imazapyr has more herbicidal effect.     

Industrial Farming is Not Cruel to Animals

Critics of industrial animal agriculture (also known as “factory” farming) have argued that its practices are cruel, inhumane, or otherwise degrading to animals. These arguments sometimes form the basis of a larger case for the complete abolition of animal agriculture, while others argue for more modest welfare-based reforms that allow for certain types of industrial farming. This paper defends industrial farming against the charge of cruelty. As upsetting as certain practices may seem, I argue that they need not be construed as cruel or inhumane. Any link between industrial farming and cruelty or inhumanity is contingent on certain cultural, behavioral, and psychological facts that are person-dependent. For many people working in animal agriculture, these facts do not obtain. To be sure, industrial animal agriculture has real moral hazards that must be carefully avoided, but all that this shows is that working with animals is not for everyone.     

Hydrometallurgical processing of Nd–Fe–B magnets for Nd purification

An evaluation of various metal purification processes subsequent to the leaching processing of the neodymium (Nd) product from neodymium–iron–boron (Nd–Fe–B) magnets has been conducted. These post-leaching purification processes included precipitation; replacement and electrolysis were studied in order to check the purity of the recovered neodymium. A hydrometallurgical investigation was adopted to digest the metal content of the scrap Nd–Fe–B magnets for the recovery of valuable Nd metal and other metals such as Fe, B, Co and Ni. The effect of leaching conditions such as solid-to-liquid ratio and temperature were optimized and 100 % Nd, 100 % Fe, 100 % B and 85.87 % Co leaching efficiencies were achieved under these conditions. The coating material of the magnet, Ni, achieved 50 % impregnation after increasing the reaction temperature to 70 °C. The metals present in the optimal leaching solution were recovered 99 % by pH adjustment. However, the replacement had the highest separation efficiency for the recovery of Nd metal. Further, the optimal leaching Nd–Fe–B solution was subjected to the electrolysis processes in order to verify the recovery efficiency for all metals.     

Application of passive sampling on assessment of concentration distribution and health risk of volatile organic compounds at a high-tech science park

The objectives of this study are to investigate the volatile organic compound (VOC) distribution using passive samplers and to assess the resulting health risks in a high-tech science industrial park. With the advantages of passive sampling techniques, long-term and wide-area samples are collected. The results show TVOC concentrations in summer, fall, winter, and spring are 7.14?±?5.66 ppb, 18.17?±?5.81 ppb, 10.30?±?3.54 ppb, and 14.56?±?4.53 ppb, respectively; those on weekdays and weekends are 14.36?±?6.80 ppb and 9.87?±?4.86 ppb, respectively; and those in industrial and residential zones are 12.97?±?0.39 ppb and 11.13?±?0.68 ppb, respectively. Based on concentration variations, and benzene, toluene, ethylbenzene, and xylene ratios, we can resolve the source origins. Health risks are assessed based on the resulting concentrations. In the case of non-cancer chronic effects, long-term exposure to these concentrations does not support there is a risk of adverse health effects. However, potential cancer risks of exposure to these concentrations may occur, especially to carbon tetrachloride and benzene. By applying this study’s procedures, information on VOC concentration distribution, source identification, and health assessment can be obtained and they are applicable to similar studies.     

Study on safe air transporting velocity of nanograde aluminum,iron, and titanium

The process of delivering nanograde metal powders by a high-speed carrier gas is often subject to high explosion risks. This study adopted initial flow rates of 13.1, 8.5, 6.5, and 3.5 m/s for air transporting 30-nm titanium powder, 35-nm iron powder, and 35-nm aluminum powder to gauge the impact on a pipe bend in a 20-l-apparatus. The test results revealed that the 30-nm titanium powder caused an explosion at all initial flow rates; the 35-nm iron powder also caused an explosion, but dust explosion and sintering were eliminated when the flow rate was adjusted to less than 3.5 m/s; and the 35-nm aluminum powder exhibited no explosion or sintering at all flow rates. When pure nitrogen was used for transporting nanograde metal powders, no explosions occurred for all the three types of metal powders. The minimum ignition energy for these three types of nanograde metal powders was less than 1 mJ.     

Report: transboundary hazardous waste management. part II: performance auditing of treatment facilities in importing countries.

Before implementing the self-monitoring model programme of the Basel Convention in the Asia, Taiwan has conducted a comprehensive 4-year follow-up project to visit the governmental authorities and waste-disposal facilities in the countries that import waste from Taiwan. A total of nine treatment facilities, six of which are reported in this paper, and the five countries where the plants are located were visited in 2001-2002. France, Belgium and Finland primarily handled polychlorinated biphenyl capacitors, steel mill dust and metal waste. The United States accepted metal sludge, mainly electroplating sludge, from Taiwan. Waste printed circuit boards, waste wires and cables, and a mixture of waste metals and electronics were the major items exported to China. Relatively speaking, most treatment plants for hazardous waste paid close attention to environmental management, such as pollution control and monitoring, site zoning, system management regarding occupational safety and hygiene, data management, permits application, and image promotion. Under the tight restrictions formulated by the central environment agency, waste treatment plants in China managed the environmental issues seriously. For example, one of the treatment plants had ISO 14001 certification. It is believed that with continuous implementation of regulations, more improvement is foreseeable. Meanwhile, Taiwan and China should also continuously enhance their collaboration regarding the transboundary management of hazardous waste.