Polybrominated diphenyl ethers (PBDEs) in sediment and bivalves from Korean coastal waters

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in sediment and bivalves collected from 25 coastal locations in Korea. Twenty major PBDE congeners were found in all sediment and bivalve samples. SigmaPBDE20 concentrations ranged from 0.45 to 494 ng/g, dry weight (average 27.8 ng/g dry weight) in sediments, and from 0.38 to 9.19 ng/g, wet weight (average 2.94 ng/g wet weight) in bivalves. The highest concentrations were found at locations near industrial complexes and large harbors, suggesting that human activities contribute to PBDEs contamination in Korean coastal environment. PBDE concentrations measured in our study, excluding BDE congener 209 (deca-BDE), in sediment and bivalves were lower than those reported from other countries; whereas BDE 209 concentrations were comparable to or higher than those reported from other countries. The predominant PBDE congener in sediments and bivalves was deca-BDE, which accounted for >90% and >60% of the total PBDE concentrations in sediment and bivalves, respectively. This is consistent with high consumption of deca-BDE for the flame-retardant market in Korea. Significant correlations existed among BDEs 28, 47, 99, 100, 153 and 154 in sediments and bivalves; however, BDEs 183 and 209 showed little correlation compared with less highly brominated congeners.     

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products

The flows of paper are analyzed throughout the papermaking processes, with the year 2007 and Korea defined as the system boundaries. In practice, the statistical data on the production, import and export of paper or pulp can be collected with relative ease from the government and industrial associations. However, the input data regarding the volumes of pulp and wastepaper used in different paper products, such as newsprint, printing papers, sanitary and household papers, specialty papers, and corrugating board base, are difficult to obtain because such information is generally kept confidential in the course of corporate operations.The production processes of paper products in Korea are modeled using information on raw materials, their compositions and production yields of products in order to identify and quantify the amounts of pulp and wastepaper used in each paper product. The material flows of paper are then analyzed based on the calculation model derived from the correlation of input and output flows between the individual processes throughout the entire paper lifecycle. Accuracy analysis using both mean absolute error (MAE) and mean absolute percent error (MAPE) is conducted to verify the amounts of pulp and wastepaper calculated from the proposed model against the volumes of domestically consumed pulp and wastepaper provided in the national statistics. Although the calculated values for the past (i.e., the 1980s and 1990s) differ to some degree from the statistical values, the data for the 2000s have a relatively higher level of accuracy, with the MAPE of the total pulp and recycling volume at 5.39% and 5.30%, respectively, thus validating the adequacy of the proposed modeling method. The proposed calculation model can be effectively used in the material flow analysis (MFA) of paper to reduce the burden of data collection and obtain relatively accurate results.     

Perceived benefits of applying Pay for Safety Scheme (PFSS) in construction – A factor analysis approach

In recent years, construction safety has been a hot topic in Hong Kong. The Government of the Hong Kong Special Administrative Region (HKSAR) has launched different safety measures to improve the prevailing safety performance of the construction industry. The Pay for Safety Scheme (PFSS) has emerged as one of the major safety initiatives launched within the public sector construction industry since 1996. It aims to encourage the safety awareness by taking the contractor’s pricing for safety-related items out from the consideration of competitive bidding. The objective is to provide a concise review of the prevailing application of PFSS in Hong Kong in general, and to identify and analyse the key benefits of PFSS in construction through an industry-wide empirical questionnaire survey in particular. Altogether, 145 industrial practitioners who have derived extensive hands-on experience with the PFSS construction projects participated in the survey to indicate their levels of agreement to those 14 key benefits identified which were measured and analysed by factor analysis. The results of factor analysis indicated that the 14 individual benefits of implementing PFSS were consolidated under four underlying factors: (1) Enhancing safety climate and attitude; (2) Promoting effective safety-related communication; (3) Streamlining the safety procedures; and (4) Ensuring adequate safety training. A wider application of PFSS should be encouraged with a view to achieving better safety performance within the industry. It is recommended that a similar scheme to PFSS currently applied in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Hydration properties of mixed cement containing ground-granulated blast-furnace slag and expansive admixture

Journal of Material Cycles and Waste Management - The hydration characteristics of mixed cement containing fine powder of blast-furnace slag and expandable material were examined by X-ray...     

Effect of activated sludge properties and membrane operation conditions on fouling characteristics in membrane bioreactors

Biofouling control is considered to be a major challenge in operating membrane bioreactors (MBRs) for the treatment of wastewater. This study examined the impact of biological, chemical, and physical properties of activated sludge on membrane filtration performance in laboratory-scale MBRs. Sludges with different microbial communities were produced using pseudo-continuous stirred-tank reactors and pseudo-plug flow reactors treating a synthetic paper mill wastewater. Various filtration resistances were used to investigate membrane fouling characteristics, and molecular biology tools targeting 16S ribosomal DNA gene sequences were used to identify predominant bacterial populations in the sludges or attached to the fouled membranes. Filtration experiments using axenic cultures of Escherichia coli, Acinetobacter calcoaceticus, and Gordonia amarae were also performed to better understand the initiation and development of biofouling. The results showed that the tendency of membranes to biofoul depended upon membrane operating conditions as well as the properties of the activated sludge in the MBR systems. Specific bacterial populations, which were not dominant in the activated sludges, were selectively accumulated on the membrane surface leading to the development of irreversible biofouling.     

A combined approach for the evaluation of a volatile organic compound emissions inventory

Emissions inventories significantly affect photochemical air quality model performance and the development of effective control strategies. However, there have been very few studies to evaluate their accuracy. Here, to evaluate a volatile organic compound (VOC) emissions inventory, we implemented a combined approach: comparing the ratios of carbon bond (CB)-IV VOC groups to nitrogen oxides (NOx) or carbon monoxide (CO) using an emission preprocessing model, comparing the ratios of VOC source contributions from a source apportionment technique to NOx or CO, and comparing ratios of CB-IV VOC groups to NOx or CO and the absolute concentrations of CB-IV VOC groups using an air quality model, with the corresponding ratios and concentrations observed at three sites (Maryland, Washington, DC, and New Jersey). The comparisons of the ethene/NOx ratio, the xylene group (XYL)/NOx ratio, and ethene and XYL concentrations between estimates and measurements showed some differences, depending on the comparison approach, at the Maryland and Washington, DC sites. On the other hand, consistent results at the New Jersey site were observed, implying a possible overestimation of vehicle exhaust. However, in the case of the toluene group (TOL), which is emitted mainly from surface coating and printing sources in the solvent utilization category, the ratios of TOL/ NOx or CO, as well as the absolute concentrations revealed an overestimate of these solvent sources by a factor of 1.5 to 3 at all three sites. In addition, the overestimate of these solvent sources agreed with the comparisons of surface coating and printing source contributions relative to NOx from a source apportionment technique to the corresponding value of estimates at the Maryland site. Other studies have also suggested an overestimate of solvent sources, implying a possibility of inaccurate emission factors in estimating VOC emissions from surface coating and printing sources. We tested the impact of these overestimates with a chemical transport model and found little change in ozone but substantial changes in calculated secondary organic aerosol concentrations.     

Reducing ammonia emissions and volatile fatty acids in poultry litter with liquid aluminum chloride

This study was a pen trial in which the effects of adding different rates of liquid aluminum chloride (AlCl₃) on litter pH, total volatile fatty acids (VFAs), and ammonia (NH₃) fluxes was evaluated. Liquid AlCl₃ treatments used in this study were sprayed on the rice hull surface at rates of 100 g, 200 g, and 300 g liquid AlCl₃/kg rice hulls; untreated rice hulls served as controls. Litter pH, total VFAs, and NH₃ fluxes were all lowered (P< 0.05) by all of the liquid AlCl₃ treatments compared with controls during certain times of the 5 week study. However, there were no significant differences among treatments on litter pH at the end of the study (from 3 to 5 weeks) or NH₃ fluxes at beginning of the study (0 to 3 weeks). Total VFAs were reduced 16 %, 29 %, and 53 % by 100 g liquid AlCl₃/kg rice hulls, 200 g liquid AlCl₃/kg rice hulls, and 300 g liquid AlCl₃/kg rice hulls, respectively. Liquid AlCl₃additions reduced NH₃ fluxes by 35 %, 57 % and 67 %, respectively, at the low, medium and high rates. In summary, these results indicate that adding liquid aluminum chloride to rice hulls would be a useful tool in reducing the negative environmental impact of poultry litter. It should be noted that the decreased VFA production and NH₃ volatilization was chiefly associated with reduction in litter pH.