Air quality modeling of hazardous pollutants: current status and future directions

The current requirements and status of air quality modeling of hazardous pollutants are reviewed. Many applications require the ability to predict the local impacts from industrial sources or large roadways as needed for community health characterization and evaluating environmental justice concerns. Such local-scale modeling assessments can be performed by using Gaussian dispersion models. However, these models have a limited ability to handle chemical transformations. A new generation of Eulerian grid-based models is now capable of comprehensively treating transport and chemical transformations of air toxics. However, they typically have coarse spatial resolution, and their computational requirements increase dramatically with finer spatial resolution. The authors present and discuss possible advanced approaches that can combine the grid-based models with local-scale information.     

Modeling atmospheric mercury deposition in the vicinity of power plants

Two mathematical models of the atmospheric fate and transport of mercury (Hg), an Eulerian grid-based model and a Gaussian plume model, are used to calculate the atmospheric deposition of Hg in the vicinity (i.e., within 50 km) of five coal-fired power plants. The former is applied using two different horizontal resolutions: coarse (84 km) and fine (16.7 km). More than 96% of the power plant Hg emissions are calculated with the plume model to be transported beyond 50 km from the plants. The grid-based model predicts a lower fraction to be transported beyond 50 km: >91% with a coarse resolution and >95% with a fine resolution. The contribution of the power plant emissions to total Hg deposition within a radius of 50 km from the plants is calculated to be <8% with the plume model, <14% with the Eulerian model with a coarse resolution, and <10% with the Eulerian model with a fine resolution. The Eulerian grid-based model predicts greater local impacts than the plume model because of artificially enhanced vertical dispersion; the former predicts about twice as much Hg deposition as the latter when the area considered is commensurate with the resolution of the grid-based model. If one compares the local impacts for an area that is significantly less than the grid-based model resolution, then the grid-based model may predict lower local deposition than the plume model, because two compensating errors affect the results obtained with the grid-based model: initial dilution of the power plant emissions within one or more grid cells and enhanced vertical mixing to the ground.     

Abiotic aging of water- soluble 3- hydroxybutyric acid oligomers as monitored by capillary zone electrophoresis

Oligomers of poly(3-hydroxybutyric acid) (P(3-HB)) were prepared by partial degradation of high molecular weight P(3-HB) dissolved in 1,2-dichloroethane/water mixture in the presence of p-toluene sulfonic acid (p-TSA). The water-soluble fraction of the resulting oligomers was extracted from the mixture with neutral sodium phosphate buffer. Capillary zone electrophoresis showed that the aqueous extracts were composed of two series of oligomers. The first one was composed of one to seven P(3-HB) oligomers (O(3-HB)). In contrast, the second series was composed of four oligomers characterized by the presence of a terminal C=C bond [O’(3-HB)]. Both series of oligomers behaved differently insofar as their fate in aqueous medium was concerned. The 0(3-HB) compounds were stable over a period of 2 months. On the other hand, the population of the O’(3-HB) oligomers varied, the proportion of oligomers increasing with aging time.     

Day-of-Week behavior of atmospheric ozone in three U.S. cities

The weekly cycles of atmospheric ozone (O3) are of interest because they provide information about the response of O3 to changes in anthropogenic emissions from weekdays to weekends. The weekly behavior of O3 in Chicago, IL; Philadelphia, PA; and Atlanta, GA, is contrasted. In Chicago and Philadelphia, maximum 1-hr average O3 increases on weekends. In Atlanta, O3 builds up from Mondays to Fridays and declines during weekends. In all three areas, volatile organic compound (VOC)/nitrogen oxides (NOx) ratios are higher during weekends, resulting from greater than proportionate decreases in NOx relative to VOC emissions. The VOC/NOx ratios correlate with maximum 1-hr O3 concentrations in Chicago, a response consistent with a VOC-sensitive airshed. A weak correlation between O3 concentrations and VOC/NOx ratios in Philadelphia suggests the impact of transported O3, which is formed in upwind VOC-sensitive locations that may be hundreds of kilometers away. Ozone concentrations in Atlanta do not correlate with VOC/NOx ratios but with concentrations of NOx and total reactive nitrogen (NOy) carried over from the previous day. When data from 1986-1990 and 1995-1999 are compared, only small differences in the weekly behavior of O3 are observed in Chicago and Philadelphia. The day-of-week differences in O3 are amplified in the more recent period in Atlanta, a possible result of urban growth.     

Stress reactions in Vitis vinifera L. following soil application of the herbicide flumioxazin

In order to evaluate the stress effects of flumioxazin (fmx) on grapevine, a non-target plant (Vitis vinifera L.), physiological parameters such as carbohydrate content, water status or nitrogenous metabolites were investigated on fruiting cuttings and plants grown in vineyard. In the leaves of cuttings, the soil-applied herbicide induced stress manifestations including a decrease of the dry weight percentage and the soluble carbohydrate content during the first week after treatment. Thereafter, a decrease of the osmotic potential was observed, as well as a decrease of total protein content and a parallel accumulation of free amino acids, including proline. Altogether, these results suggest that soil-applied fmx induced a stress in grapevines, leading to leaf proteolysis. However, this stress was partially recovered 3 weeks after herbicide application, suggesting that the cuttings were capable to adapt to the fmx exposure. In the vineyard, the flumioxazin effects were still significant 5 months after the treatment, particularly in the CH cv. They included a decrease of the leaf dry weight percentage and soluble carbohydrate content, as well as an increase of the osmotic potential. The decrease of leaf soluble carbohydrates may have dramatic consequences for the berry growth and the reserve constitution. Moreover, treated plants were characterized by a decrease of the free amino acid content and an accumulation of ammonium, while the protein level did not significantly increase, suggesting a degradation of amino acids. The alteration of carbon and nitrogen status after herbicide treatment may affect the grapevine vigour in a long term.     

The suitability of gastropods as biomarkers

The measurement and induction of mixed function oxyigenases (MFOs) of limnetic gastropods were investigated to estimate their suitability as biomarkers. A determination of MFO activities was performed through the measurement of ethoxyresorufin-O-dealkylase (EROD), pentoxy-(PROD) and benzoxyresorufin-O-dealkylase-activity (BROD). Optimal measuring conditions of these activities were investigated in preparations of the digestive gland of 4 species of limnetic gastropods. Results indicate that MFO-activity inhibiting substances are accumulating in the microsomal pellet, the fraction commonly used for the measurement of MFO-activities. Therefore, the fraction used for induction studies was the postmitochondrial supernatant (PMS). EROD, PROD, and BROD activity ofPlanorbis planorbis andPlanorbis carinatus were measured after a treatment with Aroclor 1254 for 1–17 days. Maximal induction of EROD and PROD were 6 and 10 times the value in the control group ofP. carinatus, respectively induction inP. planorbis was lower. BROD-activity could not been measured inP. planorbis. InP. carinatus, BROD-activity increased to a maximum of 2 times after traetment with Aroclor 1254. The level of induction of EROD-activity is comparable to results described in analog studies with fish.     

Aquatic microcosm assessment of the effects of tylosin on Lemna gibba and Myriophyllum spicatum

Tylosin is a macrolide antibiotic commonly used for therapeutic treatment and prophylaxis in livestock. As part of a larger ecotoxicological study, the potential phytotoxic effects of tylosin on the rooted macrophyte Myriophyllum spicatum and the floating macrophyte Lemna gibba were assessed under semi-field conditions using 15 12 000-L microcosms. Concentrations of 0, 10, 30, 300 microg/L (n = 3), and 600, 1000, and 3000 microg/L (n = 1) were evaluated as part of separate ANOVA and regression analyses over an exposure period of 35 days. Fate of tylosin was monitored over time in the highest three treatments, where dissipation followed pseudo-first order kinetics with associated half-lives ranging from 9 to 10 days. For both M. spicatum and L. gibba, tylosin was found to cause no biologically significant changes to any endpoint assessed compared to controls at a Type I error rate of 0.1. However, subsequent power analyses revealed that there was generally insufficient power to declare that there were no significant differences at a Type II error rate of 0.2. Conclusions concerning biologically significant impacts were therefore further assessed based on other statistical criteria including comparisons of percent differences between replicated treatments and controls, minimum significant and minimum detectable differences, and coefficients of variation. Based on these criteria, at an ecological effect size of >20% change, tylosin was concluded to elicit no biologically or ecologically significant toxicity to M. spicatum or L. gibba. A hazard quotient assessment indicated that tylosin poses little risk to either species of macrophyte, with an HQ value calculated to be nearly three orders of magnitude below 1 (0.002).     

An assessment of the sensitivity and reliability of the relative reduction factor approach in the development of 8-hr ozone attainment plans

The updated regulatory framework for demonstrating that future 8-hr ozone (O3) design values will be at or below the National Ambient Air Quality Standards (NAAQS) provides guidelines for the development of a State Implementation Plan (SIP) that includes methods based on photochemical modeling and analytical techniques. One of the suggested approaches is the relative reduction factor (RRF) for estimating the efficacy of emission reductions. In this study, the sensitivity of model-predicted responses towards emission reductions to the choice of meteorology and chemical mechanisms was examined. While the different modeling simulations generally were found to be in agreement on whether predicted future-year design values would be above or below the NAAQS for 8-hr O3 at a majority of the monitoring locations in the eastern United States, differences existed for a small percentage of monitors (approximately 6.4%). Another issue investigated was the ability of the attainment demonstration procedure to predict changes in monitored O3 design values. A retrospective analysis was performed by comparing predicted O3 design values from model simulations using emission estimates for 1996 and 2001 with monitored O3 design values for 2001. Results indicated that an average gross error of approximately 5 ppb was present between modeled and observed design values and that, at approximately 27% of all sites, model-predicted and observed design values disagreed as to whether the design value was above or below the NAAQS. Retrospective analyses such as the one presented in this study can provide valuable insights into the strengths and limitations of modeling and analysis techniques used to predict future design values over time periods of a decade or more for the purpose of developing SIPs. Furthermore, such analyses could provide avenues for improvement and added confidence in the use of the RRF approach for addressing attainment of the NAAQS.     

Dibenzo-p-dioxins in the environment from ceramics and pottery produced from ball clay mined in the United States

Processed ball clay samples used in the production of ceramics and samples of the ceramic products were collected and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs). The processed ball clay had average PCDD concentrations of 3.2 ng/g toxic equivalents, a congener profile, and isomer distribution consistent with those found previously in raw ball clay. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. The final fired ceramic products were found to be free of PCDDs/PCDFs at the LODs. A consideration of the conditions involved in the firing process suggests that the PCDDs, if not destroyed, may be released to the atmosphere and could represent an as yet unidentified source of dioxins to the environment. In addition, the PCDDs in clay dust generated during manufacturing operations may represent a potential occupational exposure.