Quantitative modelling to estimate the transfer of pharmaceuticals through the food production system

Use of pharmaceuticals in animal production may cause an indirect route of contamination of food products of animal origin. This study aimed to assess, through mathematical modelling, the transfer of pharmaceuticals from contaminated soil, through plant uptake, into the dairy food production chain. The scenarios, model parameters, and values refer to contaminants in emission slurry production, storage time, immission into soil, plant uptake, bioaccumulation in the animal's body, and transfer to meat and milk. Modelling results confirm the possibility of contamination of dairy cow's meat and milk due the ingestion of contaminated feed by the cattle. The estimated concentration of pharmaceutical residues obtained for meat ranged from 0 to 6 ng kg^?1 for oxytetracycline, from 0.011 to 0.181 μg kg^?1 for sulfamethoxazole, and from 4.70 to 11.86 μg kg^?1 for ketoconazole. The estimated concentrations for milk were: zero for oxytetracycline, lower than 40 ng L^?1 for sulfamethoxazole, and from 0.98 to 2.48 μg L^?1 for ketoconazole. Results obtained for the three selected pharmaceuticals indicate a minor risk for human health. This study showed that supply chain modelling could be an effective tool in assessing the indirect contamination of feedstuff and animal products by residues of pharmaceuticals. The model can easily be adjusted to other contaminants and supply chain and, in this way, present a valuable tool to underpin decision making.     

Field demonstration and evaluation of the Passive Flux Meter on a CAH groundwater plume

This study comprises the first application of the Passive Flux Meter (PFM) for the measurement of chlorinated aliphatic hydrocarbon (CAH) mass fluxes and Darcy water fluxes in groundwater at a European field site. The PFM was originally developed and applied to measurements near source zones. The focus of the PFM is extended from near source to plume zones. For this purpose, 48 PFMs of 1.4 m length were constructed and installed in eight different monitoring wells in the source and plume zone of a CAH-contaminated field site located in France. The PFMs were retrieved, sampled, and analyzed after 3 to 11 weeks of exposure time, depending on the expected contaminant flux. PFM evaluation criteria include analytical, technical, and practical aspects as well as conditions and applicability. PFM flux data were compared with so-called traditional soil and groundwater concentration data obtained using active sampling methods. The PFMs deliver reasonable results for source as well as plume zones. The limiting factor in the PFM applicability is the exposure time together with the groundwater flux. Measured groundwater velocities at the field site range from 2 to 41 cm/day. Measured contaminant flux data raise up to 13 g/m²/day for perchloroethylene in the plume zone. Calculated PFM flux averaged concentration data and traditional concentration data were of similar magnitude for most wells. However, both datasets need to be compared with reservation because of the different sampling nature and time. Two important issues are the PFM tracer loss during installation/extraction and the deviation of the groundwater flow field when passing the monitoring well and PFM. The demonstration of the PFM at a CAH-contaminated field site in Europe confirmed the efficiency of the flux measurement technique for source as well as plume zones. The PFM can be applied without concerns in monitoring wells with European standards. The acquired flux data are of great value for the purpose of site characterization and mass discharge modeling, and can be used in combination with traditional soil and groundwater sampling methods.     

The influence of copper on tebuconazole sorption onto soils, humic substances, and ferrihydrite

The aim of this study is to investigate how the presence of Cu influences tebuconazole (Teb) sorption onto contrasting soil types and two important constituents of the soil sorption complex: hydrated Fe oxide and humic substances. Tebuconazole was used in commercial form and as an analytical-grade chemical at different Teb/Cu molar ratios (1:4, 1:1, 4:1, and Teb alone). Increased Cu concentrations had a positive effect on tebuconazole sorption onto most soils and humic substances, probably as a result of Cu?Teb tertiary complexes on the soil surfaces. Tebuconazole sorption increased in the following order of different Teb/Cu ratios 1:4?>?1:1?>?4:1?>?without Cu addition, with the only exception for the Leptosol and ferrihydrite. The highest K _f value was observed for humic substances followed by ferrihydrite, the Cambisol, the Arenosol, and the Leptosol. The sorption of analytical-grade tebuconazole onto all matrices was lower, but the addition of Cu supported again tebuconazole sorption. The Teb/Cu ratio with the highest Cu addition (1:4) exhibited the highest K _f values in all matrices with the exception of ferrihydrite. The differences in tebuconazole sorption can be attributed to the additives present in the commercial product. This work proved the importance of soil characteristics and composition of the commercially available pesticides together with the presence of Cu on the behavior of tebuconazole in soils.     

The State-of-the-Art of Measuring and Predicting Cooling Tower Drift and Its Deposition

One of the key elements in estimating the environmental effects associated with the deposition of airborne chemicals and, in particular, salt particles from cooling towers is the drift rate. Eight different experimental methods are currently employed to determine the drift rate from cooling towers. The difficulties associated with the various techniques vary from case to case, but they are mainly associated with collecting a representative sample, maintaining undisturbed air flow, determining the collection efficiency of the various sampling techniques and analyzing the samples for particle size.

Several approaches have been taken to predict the deposition of salt water drift droplets on ground surfaces. Some use a simple analogy with the deposition of industrial dust, others use a combination of plume rise theories in conjunction with the Gaussian diffusion model to predict the air concentration of water droplets from which the ground deposition is then calculated. Other methods calculate the trajectories of the drift droplets accounting for their evaporation or employ diffusion type equations. Estimates derived from the various models used to predict drift deposition appear to vary by a factor of ±10 from each other.

In contrast to the fast development in drift loss measurements, very few attempts have been made to measure actual drift deposition from fresh and salt water cooling towers and to compare experimental results with numerical models.

This paper presents a discussion on the state-of-the-art of measuring and computing drift losses. In particular, drift rate values, droplet size distribution and some typical measured and calculated ground deposition values are discussed.     

Residual Perchloroethylene in Dry-Cleaned Acetate: The Effect of Pressing and Extent of Inter-Dry-Cleaner Variability

ABSTRACT

Measurements of residual perchloroethylene (PCE), a dry-cleaning solvent associated with human health effects, were made in dry-cleaned acetate cloth to enable improved characterizations of both occupational and environmental exposure. A limited sample size (25 acetate cloths) was used to explore the extent of inter-dry-cleaner variability in residual PCE and to characterize the effect of the pressing operation on residual PCE. A new method, which uses carbon-disulfide as the direct extracting agent, proved effective in the analysis of residual PCE, with a recovery-efficiency ≈ 75%. Inter-dry-cleaner variability of residual PCE, although marginally statistically significant, was relatively low, showing only a fourfold range compared to a 5-order-of-magnitude range obtained from Kawauchi and Nishiyama¹. Pairwise comparison of residual PCE in nonpressed versus pressed acetate samples revealed a statistically significant reduction (p < 0.008), which amounted to a consistent (among dry-cleaners) pressing-related removal efficiency of 75 ± 4%. A preliminary assessment of the source term associated with the pressing operation (mass PCE liberated per kg cloth dry-cleaned, S_PCE ≈ 30 mg/kg) indicates a minor contribution to the average ambient air concentrations within dry-cleaning establishments.     

The Aerosol Research and Inhalation Epidemiology Study (ARIES): PM25 Mass and Aerosol Component Concentrations and Sampler Intercomparisons

ABSTRACT

The Aerosol Research and Inhalation Epidemiology Study (ARIES) was designed to provide high-quality measurements of PM₂₅, its components, and co-varying pollutants for an air pollution epidemiology study in Atlanta, GA.

Air pollution epidemiology studies have typically relied on available data on particle mass often collected using filter-based methods. Filter-based PM_2.5 sampling is susceptible to both positive and negative errors in the measurement of aerosol mass and particle-phase component concentrations in the undisturbed atmosphere. These biases are introduced by collection of gas-phase aerosol components on the filter media or by volatilization of particle phase components from collected particles. As part of the ARIES, we collected daily 24-hr PM_2.5 mass and speciation samples and continuous PM_2.5 data at a mixed residential-light industrial site in Atlanta. These data facilitate analysis of the effects of a wide variety of factors on sampler performance. We assess the relative importance of PM_2.5 components and consider associations and potential mechanistic linkages of PM_2.5 mass concentrations with several PM_2.5 components.

For the 12 months of validated data collected to date (August 1, 1998-July 31, 1999), the monthly average Federal Reference Method (FRM) PM_{2 5} mass always exceeded the proposed annual average standard (12-month average = 20.3 ± 9.5 ug/m³). The particulate SO₄ ^2- fraction (as (NH₄)₂SO₄) was largest in the summer and exceeded 50% of the FRM mass. The contribution of (NH₄)₂SO₄ to FRM PM_2.5 mass dropped to less than 30% in winter. Particu-late NO₃ ^- collected on a denuded nylon filter averaged 1.1 ± 0.9 ug/m³. Particle-phase organic compounds (as organic carbon × 1.4) measured on a denuded quartz filter sampler averaged 6.4 ± 3.1 ug/m³ (32% of FRM PM_{2 5} mass) with less seasonal variability than SO₄ ^2-.     

Effects of Land Use Data on Dry Deposition in a Regional Photochemical Model for Eastern Texas

ABSTRACT

Land use data are among the inputs used to determine dry deposition velocities for photochemical grid models such as the Comprehensive Air Quality Model with extensions (CAMx) that is currently used for attainment demonstrations and air quality planning by the state of Texas. The sensitivity of dry deposition and O₃ mixing ratios to land use classification was investigated by comparing predictions based on default U.S. Geological Survey (USGS) land use data to predictions based on recently compiled land use data that were collected to improve biogenic emissions estimates. Dry deposition of O₃ decreased throughout much of eastern Texas, especially in urban areas, with the new land use data. Predicted 1-hr averaged O₃ mixing ratios with the new land use data were as much as 11 ppbv greater and 6 ppbv less than predictions based on USGS land use data during the late afternoon. In addition, the area with peak O₃ mixing ratios in excess of 100 ppbv increased significantly in urban areas when deposition velocities were calculated based on the new land use data. Finally, more detailed data on land use within urban areas resulted in peak changes in O₃ mixing ratios of ~2 ppbv. These results indicate the importance of establishing accurate, internally consistent land use data for photochemical modeling in urban areas in Texas. They also indicate the need for field validation of deposition rates in areas experiencing changing land use patterns, such as during urban reforestation programs or residential and commercial development.     

Integrated municipal solid waste treatment using a grate furnace incinerator: the Indaver case

An integrated installation for treatment of municipal solid waste and comparable waste from industrial origin is described. It consists of three grate furnace lines with flue gas treatment by half-wet scrubbing followed by wet scrubbing, and an installation for wet treatment of bottom ash. It is demonstrated that this integrated installation combines high recovery of energy (40.8% net) with high materials recovery. The following fractions were obtained after wet treatment of the bottom ash: ferrous metals, non-ferrous metals, three granulate fractions with different particle sizes, and sludge. The ferrous and non-ferrous metal fractions can both be recycled as high quality raw materials; the two larger particle size particle fractions can be applied as secondary raw materials in building applications; the sand fraction can be used for applications on a landfill; and the sludge is landfilled. For all components of interest, emissions to air are below the limit values. The integrated grate furnace installation is characterised by zero wastewater discharge and high occupational safety. Moreover, with the considered installation, major pollutants, such as PCDD/PCDF, Hg and iodine-136 are to a large extent removed from the environment and concentrated in a small residual waste stream (flue gas cleaning residue), which can be landfilled after stabilisation.     

Effects of oil sands process-affected waters and naphthenic acids on yellow perch (Perca flavescens) and Japanese medaka (Orizias latipes) embryonic development

Syncrude Canada Ltd. is currently developing environmentally acceptable oil sands process-affected water management methods as part of their land reclamation strategy. Surface waters of the “wet landscape” reclamation option characteristically have elevated concentrations of sodium sulphate and naphthenic acids (NAs), with low levels of PAHs. The following experiment compared early-life stage responses of yellow perch (Perca flavescens) to those of Japanese medaka (Oryzias latipes) when exposed to Mildred Lake settling basin (MLSB) surface water and a commercial sodium naphthenate (Na-NA) standard. Perch eggs were fertilized and incubated in: 100%, 50%, 20%, 4%, 0.8%, and 0.16% dilutions of MLSB water, as well as 20, 10, 5, 2.5, and 1.25 mg/l solutions of the commercial standard. Medaka embryos were exposed to the same treatments, post-fertilization. Both species demonstrated an increase in the incidence of deformity, and a decrease in length at hatch as NA concentrations increased. MLSB surface water contained higher levels of NAs than the commercial standard, however, showed consistently higher NA threshold effect concentrations for both species. Significant differences between the MLSB water and the Na-NA standard suggest that they contain NA congeners with different toxicity, or other compounds such as PAHs. Species differences in thresholds could be explained by the difference in developmental stage in which the exposures were initiated.     

Predicting radium availability and uptake from soil properties

The results of a potted soil experiment to determine the soil and plant factors ruling radium availability and uptake by ryegrass and clover are described. Nine soils with distinct soil characteristics were spiked with 226 Ra. They were thoroughly characterized and the solid liquid partitioning coefficient, Kd, was determined. Kd ranged from 38 l kg(-1) to 446 l kg(-1) (average: 188+/-156 l kg(-1)) and was linearly related to cation exchange capacity (CEC) and organic matter (OM) content. The soil-to-plant transfer factor (TF) was significantly affected by the chemical properties of the soils and ranged from 0.054 kg kg(-1) to 0.719 kg kg(-1) for ryegrass and from 0.034 kg kg(-1) to 1.494 kg kg(-1) for clover. Overall, no significant difference in TF between ryegrass and clover was observed. TF was related to Kd, to CEC, OM (for ryegrass only when excluding one soil) and the calcium concentration in the soil solution (for both plants if excluding one soil). Radium flux were calculated from the radium concentration in the soil solution and the evapotranspiration, to predict total radium uptake derived from shoot radium concentration and biomass yield. It was found that radium uptake could be predicted from the radium flux (R2=0.61 and 0.83 for ryegrass and clover, respectively). Higher predictability (R2=0.70 and 0.91 for ryegrass and clover, respectively) was obtained when relating total radium uptake to a radium flow considering competition effects at the root surface by bivalent cations.