Fe-Cu催化还原法处理废水的稳定性分析

采用扫描电镜(SEM)和X射线衍射(XRD)技术对Fe-Cu催化还原法处理硝基苯配水反应前后铁屑和铜的表面进行分析,研究了Fe-Cu催化还原法的长期运行效果.结果表明,运行数周后铜表面性状基本保持不变,化学稳定性好,抗中毒能力强.处理效果的下降主要起因于铁屑表面的金属铁发生反应而被逐渐消耗,以及铁屑表面为沉淀物覆盖而逐渐失效.     

膜生物反应器在污水处理中的应用现状及展望

综述了膜生物反应器（MBR）的研究进展，介绍了其分类及特点、处理机理与MBR运行的影响因素以及膜污染的控制等，并概括了MBR的发展及展望。MBR是近来发展较迅速的一种污水治理设备，具有占地少、能耗低等优点，但也存在一定的缺点，其中膜污染是影响其推广应用的主要因素，目前国内外学者一般都以膜污染作为切入点进行研究，通过改变料液性质、优化操作参数、提高膜清洗效率等方法得以防治膜污染。     

射流曝气的气液两相流的数值模拟

射流曝气在活性污泥处理方法中起着重要的作用。采用数值模拟的方法研究自吸式单级单喷射流器中的气液两相流动状况，通过对不同长径比和喷嘴面积比的射流曝气器模型的气液两相流的计算，定量分析长径比和喷嘴面积比对射流曝气器流场和空气与工作介质流量比的影响，为进一步设计开发新型高效的射流曝气器提供参考。     

生物膜与A／O工艺耦合快速降解氨氮

应用由城市污水处理厂序批式间歇反应器（SBR）中筛选得到的4株特殊氨氧化菌，分别在SBR和有回流的生物膜与A／O工艺耦合体系培养中，考察其降解低碳高氨氮废水的功能。结果表明，自养硝化与异养氨氧化菌的混合菌群较单一自养硝化菌株降解氨氮速率快；在生物膜与A／O工艺耦合系统中，自养硝化与异养氨氧化菌协同代谢加速氨氮氧化脱除，氨氮脱除速率远比SBR系统快。对生物膜与A／O工艺耦合系统中氨氮脱除动力学进行了研究，模拟了NH4^＋、NO2^-；质量浓度与氨氮脱除比速率之间的关系，模型得到了较好的验证。     

Use of chemical coagulants to control fouling potential for wastewater membrane bioreactor processes.

Chemical coagulation with ferric chloride, alum, and an organic polymer were used to control the fouling potential of mixed liquors for submerged membrane bioreactor (MBR) processes in treating municipal wastewater. Their filterability was evaluated using a submerged hollow fiber ultrafiltration apparatus operated in constant permeate flux mode. The collected transmembrane pressures over filtration time were used to calculate the membrane fouling rates. The results showed that coagulation pretreatment can reduce fouling rates when MBRs were operated above the critical flux. Even though coagulation with the organic polymer formed larger mixed liquor suspended solids particles and had shorter time-to-filtration than those with ferric chloride and alum, the filterability for membrane filtration were similar, indicating that the membrane fouling in MBR systems was mainly controlled by the concentration of smaller colloidal particles.     

污水厂Carrousel氧化沟溶解氧和速度分布的研究

对长沙某污水处理厂的Carrousel氧化沟进行现场测试，获得不同截面的溶解氧和速度的数据，探讨了表曝机台数、沟深、沟的长宽比、进出水位置对溶解氧和速度的影响。初步掌握了该Carrousel氧化沟内溶解氧和速度的变化规律，认为通过调节倒伞形表面曝气机，可以在沟内不同区段创造好氧与缺氧的环境，为最终实现同步硝化反硝化的高效运行做准备。     

海洋柴油溢油油水快速分离的应用研究

针对海洋柴油溢油,采用破乳剂对油水快速分离进行了研究.分别对油水比、温度、破乳剂量及存在Ca2 、Mg2 的影响因素,进行了系列油水快速分离试验,并测定了破乳剂作用下乳液的界面张力.试验结果表明,柴油溢油形成的乳液稳定性较差,油水分离较容易,但分离后的水中含油量较高.加入聚醚类非离子型破乳剂FA、FB、FC和FD,可达到油水低温、快速分离的目的,且分离后的水中含油量较低.随着破乳剂浓度的增加,界面张力降低,当破乳剂浓度达到临界胶束浓度(CMC)时,界面张力最小,脱水效果最好.Ca2 、Mg2 对聚醚类非离子型破乳剂的影响很小.     

厌氧折流板反应器处理硝基苯废水的研究

采用厌氧折流板反应器(ABR)中温处理含硝基苯废水,研究了工艺条件和硝基苯的降解特点.试验结果表明:在进水COD浓度为2088 mg/L,硝基苯浓度为16.8 mg/L,反应温度为35℃,停留时间为24 h条件下,ABR能有效处理硝基苯废水,COD去除率为86.4%,硝基苯去除率为91.1%;在厌氧条件下,硝基苯降解为苯胺,但苯胺很难再进一步分解;硝基苯的去除历程推断为先吸附后分解.     

Thermophilic-anaerobic digestion to produce class A biosolids: initial full-scale studies at Hyperion Treatment Plant.

The highest quality of biosolids is called exceptional quality. To qualify for this classification, biosolids must comply with three criteria: (1) metal concentrations, (2) vector-attraction reduction, and (3) the Class A pathogen-density requirements. The City of Los Angeles Bureau of Sanitation Hyperion Treatment Plant (HTP) (Playa del Rey, California) meets the first two requirements. Thus, the objective of this study was to ensure that HTP's biosolids production would meet the Class A pathogen-reduction requirements following the time-temperature regimen for batch processing (U.S. EPA, 1993; Subsection 32, Alternative 1). Because regulations require the pathogen limits to be met at the last point of plant control, biosolids sampling was not limited to immediately after the digesters, i.e., the digester outflows. The sampling extended to several locations in HTP's postdigestion train, in particular, the last points of plant control, i.e., the truck loading facility and the farm for land application. A two-stage, thermophilic-continuous-batch process, consisting of a battery of six egg-shaped digesters, was established in late 2001 for phase I of this study and modified in early 2002 for phase II. As the biosolids were discharged from the second-stage digesters, the Salmonella sp. (pathogen) and fecal-coliform (indicator) densities were well below the limits for Class A biosolids, even though the second-stage-digester temperatures were a few degrees below the temperature required by Alternative 1. Salmonella sp. densities remained below the Class A limit at all postdigestion sampling locations. Fecal-coliform densities were also below the Class A limit at postdigestion-sampling locations, except the truck-loading facility (phases I and II) and the farm for final use of the biosolids (phase II). Although federal regulations require one of the limits for either fecal coliforms or Salmonella sp. to be met, local regulations in Kern County, California, where the biosolids are land-applied, require compliance with both bacterial limits. Additional work identified dewatering, cooling of biosolids after the dewatering centrifuges, and contamination as possible factors in the rise in density of fecal coliforms. These results provided the basis for the full conversion of HTP to the Los Angeles continuous-batch, thermophilic-anaerobic-digestion process. During later phases of testing, this process was demonstrated to produce fully disinfected biosolids at the farm for land application.     

京津冀民用燃煤减排对大气中BaP污染影响评估

运用空气质量模型CMAQ模拟评估民用燃煤减排政策对京津冀大气中BaP污染状况的改进效果,模拟包括作为基准情景的2014年和低消减和高消减2个减排情景.模拟结果表明：基准情景下,京津冀BaP年均浓度为2.54ng/m³,超过国家空气质量标准（1ng/m³）,呈现1月 > 4月 > 10月 > 7月的季节变化特点,反映出冬季供暖燃煤的影响;京津冀南部BaP浓度高于北部,推测原因是南部BaP排放量较高.1月削减民用燃煤排放量对降低该地区BaP浓度和沉降量效果最显著,低削减和高削减下,北京、保定、廊坊BaP浓度分别比基准情景降低30%和40%以上;4、7、10月削减民用燃煤排放量对该地区BaP浓度和沉降量的变化影响不大.京津冀民用燃煤联防联控能更加有效地降低该地区BaP浓度.