Process control factors for continuous microbial perchlorate reduction in the presence of zero-valent iron

Process control parameters influencing microbial perchlorate reduction via a flow-through zero-valent iron （ZVI） column reactor were investigated in order to optimize perchlorate removal from water. Mixed perchlorate reducers were obtained from a wastewater treatment plant and inoculated into the reactor without further acclimation. Examined parameters included hydraulic residence time （HRT）, pH, nutrients requirement, and perchlorate reduction kinetics. The minimum HRT for the system was concluded to be 8 hr. The removal efficiency of 10 mg. L-1 influent perchlorate concentration was reduced by 20%-80% without control to the neutral pH （HRT = 8 hr）. Therefore pH was determined to be an important parameter for microbial perchlorate reduction. Furthermore, a viable alternative to pH buffer was discussed. The microbial perchlorate reduction followed the first order kinetics, with a rate constant （K） of 0.761 hr-1. The results from this study will contribute to the implementation of a safe, cost effective, and efficient system for perchlorate reduction to below regulated levels.     

Biofouling attractants from a brown marine alga Ecklonia cava

In recent years, industrial pollutants and the mountain forest fire ashes released into seawater cause damage to the marine environment, mainly it reduces the algal productivity in the inter tidal region. To get recover from the stress due to pollutants and to increase the growth and development of biofouling algae (benthic organisms), Ecklonia cava extract was investigated for its biofouling attracting efficiency. Bioactive guided fractions of E. cava extract derived from column chromatography were tested against spore attachment of a fouling alga, Ulva pertusa. Fraction B showed increased spore attachment rate with a maximum of 92 +/- 5%. This fraction was further analysed on HPLC, GC-Mass and NMR, deduced as pentadecanoic acid.     

Development of a Marine Sediment Pollution Index.

To facilitate translation of the state of marine sediment quality for public information, a pollution index was developed from the results of a routine monitoring program. Principal component analysis (PCA) of 24 variables at 64 monitoring stations from 1987 to 1997 was carried out to identify the most important parameters that were applied in the index formulation. Of the 24 variables, six (Cr, Cu, Ni, chemical oxygen demand, Zn, Mn) were selected on the basis of their high PCA loadings. The derived Marine Sediment Pollution Index, rating from 0 to 100, reflected the general trend in the monitoring areas. The index was also found to have a significant negative correlation (P < 0.05) with the benthic species diversity and toxicity of the sediment, indicating its usefulness in reflecting marine sediment quality. The application of PCA to identify important variables from a monitoring program would reduce sampling resources, as parameters that did not show significant spatial or temporal variations could be analyzed in a lesser frequency than those that were identified to be more important from the results of PCA.     

A pilot study of citizens' opinions on the Incident Command System in Taiwan

Local residents may have different views on disaster‐response modes depending on their cultural and socioeconomic background. The purpose of this study was to examine Taiwan residents' opinions on the Incident Command System (ICS). We performed a structured survey through face‐to‐face interviews in mudslide‐affected communities. Quantitative analysis showed that the residents exhibited a clear preference for the ICS core‐principle attributes of ‘integrated communications’, ‘transfer of command’ and ‘modular organisation’. By contrast, the residents tended towards a non‐ICS approach for ‘incident action plan’ and ‘manageable span of control’. Qualitative analysis revealed an uncertain attitude towards ‘transfer of command’ and ‘incident action plan’. Community acceptance is important in the promotion of the ICS. A better understanding of residents' preferences should be acquired through a broader community survey, allowing us to understand perspectives on the ICS among different societies and facilitate implementation of the ICS at the basic community level.     

Population maintenance of the short-lived shrub Sambucus in a deciduous forest

This study quantitatively clarifies the life history of a shrub, Sambucus racemosa ssp. sieboldiana, in an old-growth forest, the Ogawa Forest Reserve, Japan, by a demographic approach using a projection matrix model that incorporates interactions between demographic parameters and canopy height dynamics. S. racemosa is a common deciduous shrub in central Japan and is known to grow predominantly at forest edges or roadsides. This indicates that it is a highly light-demanding species, and occurrence in gaps in old-growth stands suggests its "fugitive," gap-dependent life history in old-growth forests. We found that one distinctive feature of this species was that its seedlings can survive well in shaded conditions by alternating stems every year like perennial herb species. Matrix model analyses demonstrated that S. racemosa can continuously regenerate under the present disturbance regime of this forest and is highly adaptable to the structural dynamics of the old-growth forest. The maturity of S. racemosa shrubs depends on their size, and nearly all (>90%) of the mature (reproducing) individuals were found in gaps or near gaps. But wide seed dispersal by birds and the ability to form both seed banks and seedling banks, the latter of which has been regarded as a common characteristic of shade-tolerant climax species, probably increase the species' chances to encounter canopy gaps. Dynamic-canopied matrix models showed that the greatest elasticity is with shaded seedling survival. The frequent stem alternation of shaded seedlings often makes the growth rate negative, but the survival rate of seedlings in low light awaiting new gap creation is remarkably high (0.93 yr(-1)). The lower survival rate of the larger individuals and smaller minimum size to start reproduction than other canopy or subcanopy shade-tolerant species indicate that S. racemosa has the potential to reproduce before the closure of the encountered gaps and to complete its life history rapidly.     

Spatial variability in chromophoric dissolved organic matter for an artificial coastal lake (Shiwha) and the upstream catchments at two different seasons

Selected water quality parameters and spectroscopic characteristics of dissolved organic matter (DOM) were examined during two different seasons for an artificial coastal lake (Shiwha Lake in South Korea), which are affected by seawater exchange due to the operation of a tidal power plant and external organic loadings from the upstream catchments. The coastal lake exhibited much lower concentrations of organic matter and nutrients than the upstream sources. The spectroscopic properties of the lake DOM were easily distinguished from those of the catchment sources as revealed by a lower absorption coefficient, lower degree of humification, and higher spectral slopes. The observed DOM properties suggest that the lake DOM may be dominated by smaller molecular size and less condensed structures. For the lake and the upper streams, higher absorption coefficients and fluorescence peak intensities but lower spectral slopes and humification index were found for the premonsoon versus the monsoon season. However, such seasonal differences were less pronounced for the industrial channels in the upper catchments. Three distinctive fluorophore groups including microbial humic-like, tryptophan-like, and terrestrial humic-like fluorescence were decomposed from the fluorescence excitation-emission matrix (EEM) of the DOM samples by parallel factor analysis (PARAFAC) modeling. The microbial humic-like component was the most abundant for the industrial channels, suggesting that the component may be associated with anthropogenic organic pollution. The terrestrial humic-like component was predominant for the upper streams, and its relative abundance was higher for the rainy season. Our principal component analysis (PCA) results demonstrated that exchange of seawater and seasonally variable input of allochthonous DOM plays important roles in determining the characteristics of DOM in the lake.     

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800

Measurement of carcinogenic Cr(VI) in ambient PM is challenging due to potential errors associated with conversion between Cr(VI) (a carcinogen) and Cr(III) (an essential nutrient). Cr(III) conversion is a particular concern due to its >80% atomic abundance in total Cr. U.S. Environmental Protection Agency (EPA) method 6800 that uses water-soluble isotope spikes can be used to correct the interconversion. However, whether the enriched Cr(III) isotope spikes can adequately mimic the Cr(III) species originally in ambient PM is unknown. This study examined the water solubility of Cr(III) in ambient PM and discussed its influence on Cr(VI) measurement. Ambient PM₁₀ samples were collected on Teflon filters at four sites in New Jersey that may have different Cr emission sources. The samples were ultrasonically extracted with 5 mL DI-H₂O (pH 5.7) at room temperature for 40 min, and then analyzed by ion chromatography–inductively coupled plasma mass spectrometry (IC-ICPMS). Cr(III) was below detection limit (0.06 ng/m³) for all samples, suggesting water-soluble Cr(III) species, such as CrCl₃, Cr(NO₃)₃, and amorphous Cr(OH)₃, in the ambient PM were negligible. Therefore, the enriched ⁵⁰Cr(III) isotope spike (in the form of Cr(NO₃)₃) could not mimic the original ambient Cr(III). Only the conversion of ⁵³Cr(VI) (in the form of K₂CrO₄) was taken into account when correcting the interconversion. We then used NaHCO₃-pretreated MCE filters (prespiked with enriched isotope species) to measure Cr(VI) in the ambient PM₁₀. The samples were ultrasonically extracted at 60 C pH 9 solutions for 40 min followed by IC-ICPMS analysis. Due to the correction of Cr(VI) reduction, the Cr(VI) concentrations determined by EPA method 6800, 0.26 ± 0.16 (summer) and 0.16 ± 0.11(winter) ng/m³ (n = 64), were significantly greater than those by the external standard curve, 0.21 ± 0.17 (summer) and 0.10 ± 0.07 (winter) ng/m³ (n = 56) (p < 0.01, Student’s t-test). Our study revealed that appropriate application of EPA method 6800 is important because it only applies to soluble fraction of Cr species in ambient PM.

ImplicationsAccurate measurement of carcinogenic Cr(VI) in ambient PM is challenging due to conversion between Cr(VI) (a human carcinogen) and Cr(III) (a human essential nutrient). The conversion of Cr(III) is of particular concern due to its dominant presence in total Cr (>80%). This study examined the water solubility of Cr(III) in ambient PM that was collected at four locations in New Jersey. Then we discussed the influence of Cr(III) solubility on the application of EPA method 6800, which utilizes enriched isotope spikes to correct the interconversion. Our results suggested that appropriate application of EPA method 6800 is important because it only applies to soluble fraction of Cr species.     

The application and development of country-specific parameters for accurate estimations of methane emissions from solid-waste disposal sites

To identify the application and development of country-specific parameters for methane emission estimations from solid-waste disposal sites, National Inventory Reports of 41 Annex I countries and National Communications of ten non-Annex I countries of the United Nations Framework Convention on Climate Change were analyzed. A first-order decay method was applied to 38 out of 41 Annex I countries and to five out of ten non-Annex I countries in national GHG inventory submissions up to 2012. Country-specific parameters were approximately 26 % of the total number of parameters used in the 38 Annex I countries and were mostly developed for degradable organic carbon and reaction constants that cover certain waste compositions. The UNFCCC encourages countries to develop more country-specific parameters reflecting the distinct characteristics of each country in which solid-waste disposal site is a key source. Depending on a country’s condition, a stepwise approach regarding the development of country-specific parameters needs to be done so as to improve the accuracy of methane emission estimates in the solid-waste disposal site category.     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Temporal variation of volatile organic compounds and their major emission sources in Seoul, Korea

This study examines the characteristics of volatile organic compounds (VOCs) and their major emission sources at the Bulgwang site in Seoul, Korea. The annual levels of VOCs (96.2–121.1 ppb C) have shown a decreasing trend from 2004 to 2008. The most abundant component in Seoul was toluene, which accounted for over 23.5 % of the total VOCs on the parts per billion on a carbon basis, and the portions of alkanes with two to six carbons constituted the largest major lumped group, ranging from 40.1 to 48.4 % (45.3?±?3.7 %) of the total VOCs. Major components of the solvent (toluene, m/p-xylene, o-xylene, and ethylbenzene) showed high in daytime and summer and low in nighttime and winter due mainly to the variation of the ambient temperature. The species mostly emitted from gasoline vapor (i/n-butane, i/n-pentane, n-hexane, and 2-methylpentane) and vehicular exhaust (ethylene, acetylene, and benzene) showed bimodal peaks in the diurnal variation around the commuting hours because of the high traffic volume. For the 14 out of 15 highest concentration species, the weekend effect was only evident on Sundays because of the stepwise implementation of the 5-day work-week system. Principal components analysis (PCA) was applied in order to identify the sources of the 15 highest concentration VOCs and, as a result, three principal components such as gasoline vapor (48.9 %), vehicular exhaust (17.9 %), and evaporation of solvents (9.8 %) were obtained to explain a total of 76.6 % of the data variance. Most influential contributing sources at the sampling site were traffic-related ones although the use of solvent was the dominant emission source based on the official emission inventory.