二溴硝基甲烷在紫外光照条件下的光降解

以二溴硝基甲烷为研究,采用单一控制变量法研究了光照强度、初始物浓度、自由氯、溴离子、pH值等影响因子对二溴硝基甲烷光降解的影响,探讨了二溴硝基甲烷的光降解动力学规律.结果表明：二溴硝基甲烷在紫外光条件下的降解遵循一级反应动力学规律,其光降解效率随二溴硝基甲烷初始浓度的增加而减小,随光照强度和pH值增加而增加;溴离子的存在能促进二溴硝基甲烷的光降解;添加自由氯能够显著加快二溴硝基甲烷的光降解效率,并且会使二溴硝基甲烷在光降解的过程中转化为以一溴一氯硝基甲烷为主的其他卤代硝基甲烷.此研究结果可为水处理过程中控制二溴硝基甲烷的形成、降低水质安全风险提供参考.     

机动车轮胎磨损颗粒物化学组分特征研究

为研究机动车道路行驶过程中轮胎磨损排放的颗粒物理化特性,利用轮胎轮廓仿真磨耗仪,对国内主流17种轮胎胎面进行仿真磨耗实验,获得颗粒物样品,提取并检测其中18种元素和20种多环芳烃（PAHs）的含量.结果显示,元素和PAHs含量因轮胎品牌和速度等级的不同而差异显著.18种元素平均含量为（99.04±68.43）mg/g,占样品总重的9.90%,其中Si（88.97±67.85）mg/g、Zn（6.77±1.64）mg/g和Na（1.05±0.75）mg/g的平均含量均超过1mg/g,Cd的含量最低,为（0.43±0.31）μg/g.20种PAHs含量之和（∑20PAHs）在12.13~433.64 μg/g,平均为（94.13±110.18）μg/g,PY的平均含量最高（30.98±31.27）μg/g,其次是CHR、BaP、FA、PHE和BghiP,平均含量最低的是AC（0.58±0.2）μg/g;从环数看,以4环PAHs为主（占∑20PAHs的45.03%~67.93%）,其次为3环（平均含量为15.45%）和5环（平均含量为12.62%）.总体来说,国外品牌轮胎样品中元素和PAHs含量略高于国内品牌,而主要PAHs环数略低于国内品牌.     

Effect of NOx and SO2 on the photooxidation of methylglyoxal: Implications in secondary aerosol formation

Methylglyoxal(CH_3COCHO,MG),which is one of the most abundant α-dicarbonyl compounds in the atmosphere,has been reported as a major source of secondary organic aerosol(SOA).In this work,the reaction of MG with hydroxyl radicals was studied in a 500 L smog chamber at(293±3) K,atmospheric pressure,(18±2)% relative humidity,and under different NOx and SO_2.Particle size distribution was measured by using a scanning mobility particle sizer(SMPS) and the results showed that the addition of SO_2 can promote SOA formation,while different NOx concentrations have different influences on SOA production.High NOx suppressed the SOA formation,whereas the particle mass concentration,particle number concentration and particle geometric mean diameter increased with the increasing NOx concentration at low NOx concentration in the presence of SO_2.In addition,the products of the OH-initiated oxidation of MG and the functional groups of the particle phase in the MG/OH/SO_2 and MG/OH/NOx/SO_2 reaction systems were detected by gas chromatography mass spectrometry(GC-MS) and attenuated total reflection fourier transformed infrared spectroscopy(ATR-FTIR) analysis.Two products,glyoxylic acid and oxalic acid,were detected by GC-MS.The mechanism of the reaction of MG and OH radicals that follows two main pathways,H atom abstraction and hydration,is proposed.Evidence is provided for the formation of organic nitrates and organic sulfate in particle phase from IR spectra.Incorporation of NOx and SO_2 influence suggested that SOA formation from anthropogenic hydrocarbons may be more efficient in polluted environment.     

Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.     

不同制备温度下污泥生物炭对Cr(Ⅵ)的吸附特性

以城市剩余污泥为原料,于300,400,500,600 ℃温度条件下制备生物炭,通过单因素静态吸附实验探讨制备温度对生物炭吸附Cr（Ⅵ）的影响。结果表明:在500 ℃以内随着温度上升制备的生物炭对Cr（Ⅵ）的吸附量增加,制备温度高于500 ℃后变化不明显;扫描电镜（SEM）、比表面积（BET）、傅里叶红外光谱（FTIR）表征结果显示,热解温度对生物炭表面形貌和官能团组成有显著影响;等温模型及动力学拟合结果表明,生物炭吸附Cr（Ⅵ）为单分子层吸附、物理-化学复合吸附。热解温度对污泥制备生物炭吸附Cr（Ⅵ）的性能有显著影响,最佳制备温度为500 ℃,在此条件制备的生物炭对Cr（Ⅵ）的理论吸附量可达7.93 mg/g。     

污泥与不同pH值渗滤液联合厌氧发酵产氢分析

以污泥与垃圾焚烧厂渗滤液为原料,通过小瓶批式试验,考察了垃圾渗滤液的添加量以及渗滤液初始pH对联合厌氧消化产氢的影响。结果表明:未添加污泥的渗滤液本身也可以在厌氧发酵过程中产氢。而污泥与垃圾渗滤液联合厌氧发酵,当渗滤液初始pH为5.20时,添加90%的渗滤液体系产氢量最大,为201.58 mL,最大产氢速率也最高,为9.56 mL/h;当初始渗滤液pH为4.47时,最大产氢量出现在渗滤液添加剂量为60%的样品,为57.73 mL,随后减小,但最大产氢速率在添加40%的渗滤液达到峰值,为5.11 mL/h。     

长治市沙尘天气污染特征及传输路径解析

以2018年3次沙尘天气为研究对象,分析了PM_2.5和PM₁₀浓度、水溶性离子组分、气象条件和气溶胶光学特征,研究了长治市沙尘天气的典型污染特征和传输路径.结果表明：长治市2018年共8d为受沙尘天气影响日,其中4月份最多（5d）,这与春季大气环流调整,冷暖空气活动频繁有关.沙尘污染发生前一般受西方或西北方冷空气影响,大气层结不稳定,大气环流转为经向环流,平均风速达4m/s以上;沙尘污染过程中PM_2.5/PM₁₀均低于0.3,环境空气中粗颗粒物占比较大,水溶性离子总浓度在PM_2.5中占比下降,Ca²⁺浓度为沙尘污染发生前的4倍以上.冬季沙尘为近地面扩散传输,春夏季沙尘为高空沉降传输,影响范围大,区域传输贡献明显.长治市沙尘重要潜在源区为蒙古国、哈萨克斯坦中部和新疆中北部的荒漠地区,传输路径主要为西北路径和正北路径,其中西北路径为哈萨克斯坦—新疆中北部—内蒙古西部—长治以及新疆中北部—内蒙古西部—长治两条路径,正北路径为蒙古国—内蒙古中部—山西北部—长治.     

矿山排水污染稻田土壤胶体对砷的吸附研究

为研究矿山排水污染土壤胶体对砷的吸附影响,文章以高砷污染区和背景区土壤的胶体在不同的pH、离子强度以及好氧/厌氧淹水条件下对As(Ⅴ)的吸附进行对比试验。结果表明:土壤胶体对As(Ⅴ)的吸附量随pH的增大而减少,且污染区胶体比背景区胶体对As(Ⅴ)的吸附量大;离子强度越大,胶体对As(Ⅴ)的吸附量越大,Ca(NO_3)_2浓度从0.001 mol/L增至0.1 mol/L时,污染区与背景区胶体对As(Ⅴ)的吸附量分别增加了30.57%、50.25%;厌氧淹水后的胶体对As(Ⅴ)的吸附量低于好氧条件下的胶体,解吸量较高,且厌氧淹水后污染区胶体与背景区胶体相比无明显吸附优势,而好氧条件下污染区胶体的解吸率低于背景区胶体,说明厌氧淹水后的胶体不易吸附且易释放As(Ⅴ)。因此,低p H和高离子强度以及好氧的条件有利于土壤胶体对砷的吸附。     

Evaluating national hydrogen refueling infrastructure requirement and economic competitiveness of fuel cell electric long-haul trucks

This study explored the national hydrogen refueling infrastructure requirement along major United States (US) interstate highway corridors to support the deployment of fuel cell electric trucks (FCETs) for the national long-haul trucking fleet. Given the long-haul trucking shipment demand in 2025 projected by the Freight Analysis Framework, locations and capacities of hydrogen stations were identified for inter-zone freight flows, and the total daily refueling demand was estimated for intra-zone flows for each FAF zone. Based on the infrastructure deployment results, we conducted an economic feasibility analysis of FCETs by evaluating the total ownership cost. We found that when the FCET penetration is relatively high (e.g., 10% penetration), FCETs become more competitive in terms of fuel cost and idling cost and could be economic viable if the incremental vehicle cost is reduced to meet the near-term FCET technology cost targets and the liquefaction cost is reduced to an optimal case. We also observed that the station cost depends on regional factors, particularly regional demand, which is used to determine station capacity. Thus, one possible strategy for station roll-out is to have early investment in target regions where station costs are expected to be relatively low such as the Pacific and West South Central regions.