Quantification of gasoline-ethanol blend emissions effects

ABSTRACT

Emissions levels from current gasoline spark-ignited engines are low, and emissions changes associated with the blending of ethanol into gasoline are small and difficult to quantify. Addition of ethanol, with a high blending octane number, allows a reduction in aromatics in market gasoline. Blending behavior of ethanol is nonlinear, altering the distillation curve, including the 50% temperature point, T50. Increase in gasoline direct injection (GDI) engine technology in the fleet challenges ability of older models based on port fuel injection (PFI) results to predict the overall air quality impact of ethanol blending. Five different models derived from data collected through U.S. Environmental Protection Agency Energy Policy Act (EPAct) programs were used to predict LA92 Phase 1 particulate matter (PM) emissions for summer regular (SR) E0 (gasoline with 0% ethanol by volume), E10 (gasoline with 10% ethanol) and E15 (gasoline with 15% ethanol). Substantial reductions of PM for E10 and E15 relative to E0 were predicted when aromatics were displaced by ethanol to maintain octane rating. SR E0 and E10 were also matched to linear combinations of EPAct fuels and results showed a 35% PM reduction for SR E10 relative to SR E0. For GDI vehicles the Coordinating Research Council (CRC) E-94-3 study found that E10 had 23% or 29% PM increase. However, CRC E-129 found an E10 PM reduction of 10% when one E0 fuel and its splash blended (SB) E10 were compared. Both CRC project E-129 SB data and fuel triplets selected from the EPAct study showed variation for E15 emissions, although E-129 suggests that E15 in GDI offers about a 25% reduction of PM with respect to E0. Overall, data suggest that ethanol blending offers a modest to a substantial reduction of cold-start PM mass if aromatic levels of the finished products are reduced in response to ethanol addition.

Implications: Studies of exhaust emissions effects of ethanol blending with gasoline vary in conclusions. Blending properties are nonlinear. Modeling of real-world emissions effects must consider all fuel composition adjustments and property changes associated with ethanol addition. Aromatics are reduced in E10 or E15, compared with E0, and distillation changes. PFI-derived models show reductions in cold-start PM for expected average E10 versus E0 pump fuel, due to reduced aromatic content. Relative emissions effects from older technology (PFI) engines do not predict newer engine (GDI) results reliably, but recent GDI data show reduced cold-start PM when ethanol displaces aromatics.     

The effect of air control systems on the indoor distributions of viable particles

We have investigated the filtering effects of three types of air control systems of enclosed structures on viable particles in the ambient air. Aspergillus fumigatus and other thermophilic organisms were used as monitors for viable particles. The indoor concentrations of viable particles were found to be affected by building design and the use of conventional mechanical air systems. Viable particles of approximately 4.0 μm and greater in aerodynamic diameter were filtered from the air while respirable size particles less than 4.0 μm were not filtered as well. There was evidence of growth of viable particles within the mechanical air systems. Conventional air control systems may not be adequate for the control of viable particle contamination of the indoor environment without modifications and proper maintenance.     

Pulmonary function evaluation of cats after one year of exposure to diesel exhaust

Adult male, inbred, disease-free cats of uniform age and size were exposed eight hours per day, seven days per week to a 1 : 18 dilution of diesel exhaust emissions. After one year of exposure, the animals were removed from the chambers for measurement of lung volumes, forced expiratory flow rates, dynamic compliance and resistance, diffusing capacity, and nitrogen washout. No important changes in pulmonary function were detected with the exception of a decrease in closing volume (P < 0.05). The inability to detect decrements in pulmonary function may have been due to insufficient cocentration of exhaust, insufficient exposure length, or to the use of a species resistant to diesel exhaust. To test these possibilities, the cats are being exposed for an additional year, and another species, hamsters, are being exposed for future testing at exhaust dilutions of 1 : 18 and 1 : 9.     

Pathogen-induced hatching and population-specific life-history response to waterborne cues in brown trout (Salmo trutta)

Hatching is an important niche shift, and embryos in a wide range of taxa can either accelerate or delay this life-history switch in order to avoid stage-specific risks. Such behavior can occur in response to stress itself and to chemical cues that allow anticipation of stress. We studied the genetic organization of this phenotypic plasticity and tested whether there are differences among populations and across environments in order to learn more about the evolutionary potential of stress-induced hatching. As a study species, we chose the brown trout (Salmo trutta; Salmonidae). Gametes were collected from five natural populations (within one river network) and used for full-factorial in vitro fertilizations. The resulting embryos were either directly infected with Pseudomonas fluorescens or were exposed to waterborne cues from P. fluorescens-infected conspecifics. We found that direct inoculation with P. fluorescens increased embryonic mortality and induced hatching in all host populations. Exposure to waterborne cues revealed population-specific responses. We found significant additive genetic variation for hatching time, and genetic variation in trait plasticity. In conclusion, hatching is induced in response to infection and can be affected by waterborne cues of infection, but populations and families differ in their reaction to the latter.     

Improved estimates of net primary productivity from modis satellite data at regional and local scales.

We compared estimates of net primary production (NPP) from the MODIS satellite with estimates from a forest ecosystem process model (PnET-CN) and forest inventory and analysis (FIA) data for forest types of the mid-Atlantic region of the United States. The regional means were similar for the three methods and for the dominant oak-hickory forests in the region. However, MODIS underestimated NPP for less-dominant northern hardwood forests and overestimated NPP for coniferous forests. Causes of inaccurate estimates of NPP by MODIS were (1) an aggregated classification and parameterization of diverse deciduous forests in different climatic environments into a single class that averages different radiation conversion efficiencies; and (2) lack of soil water constraints on NPP for forests or areas that occur on thin or sandy, coarse-grained soil. We developed the "available soil water index" for adjusting the MODIS NPP estimates, which significantly improved NPP estimates for coniferous forests. The MODIS NPP estimates have many advantages such as globally continuous monitoring and remarkable accuracy for large scales. However, at regional or local scales, our study indicates that it is necessary to adjust estimates to specific vegetation types and soil water conditions.     

Behavioral regulation of genetic caste determination in a Pogonomyrmex population with dependent lineages

The fate of a social insect colony is partially determined by its ability to allocate individuals to the caste most appropriate for the requirements for growth, maintenance, and reproduction. In pairs of dependent lineages of Pogonomyrmex barbatus, the allocation of individuals to the queen or worker caste is constrained by genotype, a system known as genetic caste determination (GCD). In mature GCD colonies, interlineage female eggs develop into sterile workers, while intralineage eggs become reproductively capable queens. Although the population-level consequences of this system have been intensively studied, the proximate mechanisms for GCD remain unknown. To elucidate these mechanisms, we brought newly mated queens into the laboratory and allowed them to establish colonies, nearly half of which unexpectedly produced virgin queens only seven months after colony founding. We genotyped eggs, workers, and the virgin queens from these colonies. Our results showed that queens in young colonies produce both interlineage and intralineage eggs, demonstrating that queens of GCD colonies indiscriminately use sperm of at least two lineages to fertilize their eggs. Intralineage eggs were more frequent in colonies producing virgin queens. These findings suggest that intralineage eggs are predetermined to become queens and that workers may cull these eggs when colonies are not producing queens. Virgin queens produced by young GCD colonies were smaller than field-caught virgin queens, and often had developmental problems. Hence, they are probably nonfunctional and represent an intense resource drain for developing colonies, not a contribution to colony fitness.     

Social, cultural and structural influences on household waste recycling: A case study

The household-recycling rate in the Borough of Burnley, England in 2001/2002 was only half the national average of 12%. This research employed both quantitative and qualitative surveys in order to ascertain whether householders’ attitudes to recycling were contributory factors to the generally poor recycling performance and to investigate other social, cultural and structural influences. The Borough has a large Asian–British population concentrated in two deprived wards where recycling rates are particularly low, so special attention was given to ascertaining their attitudes towards recycling.The quantitative survey comprised a postal questionnaire sent to a random sample of 360 households drawn from the electoral register. The qualitative survey consisted of group interviews with the Asian–British population at local community centres and focus groups attended by volunteers from the quantitative study.The findings suggest that householders are very willing to participate in recycling, as shown by the almost 80% claiming to recycle paper, but that local recycling services are too unreliable and inconvenient to allow them to do so comprehensively. Asian–British attitudes to recycling were found to be no different to those of the wider population, with their low participation being linked to the higher priorities imposed upon them by economic deprivation. The findings are broadly in line with those of the literature in that recycling participation tends to be higher among more affluent and older people, but lower among less affluent and younger households, probably due in part to the availability of both storage space and time, with the implication that the Borough's preponderance of terraced housing militates against a high recycling rate. Policy recommendations to local authorities include the provision of bespoke recycling services to suit the variety of residential conditions across the UK, and the provision of regular feedback to householders regarding recycling services and performance.Further research is needed to identify non-recyclers and to explore how householders’ underlying psychological, cultural and social attitudes to recycling impinge upon recycling and participation rates.     

A PRACTICAL GUIDE FOR THE DEVELOPMENT OF A WETLAND ASSESSMENT METHOD: THE CALIFORNIA EXPERIENCE1

Wetland rapid assessment methods (RAMs) can provide a cost effective, scientifically defensible estimate of wetland and riparian condition for use in ambient and project monitoring in resource management and regulatory programs. Those who have chosen to develop a RAM to assess wetland and riparian condition are faced with a range of issues and important choices that they must make throughout the development process. This paper is intended as a practical guide to RAM development. Six basic stages in the RAM development process are discussed: (1) organize RAM development by identifying the intended applications, assessment endpoints, and geographic scope of the RAM and forming appropriate teams to advise and review the development process and its products; (2) build a scientific foundation for method development by conducting a literature review, choosing a wetland classification system, building conceptual models, and identifying the major assumptions underlying the model; (3) assemble the method as a system of attributes and metrics that describe a full range of conditions; (4) verify the ability of the method to distinguish between wetlands along a continuum of conditions; (5) calibrate and validate the method against sets of quantitative data representing more intensive measures of wetland condition; and (6) implement the method through outreach and training of the intended users. Important considerations within each of these stages lead to choices in accuracy, precision, robustness, ease of use, and cost. These are identified and the tradeoffs of the various options discussed. Experience with the ongoing development and implementation of the California Rapid Assessment Method (CRAM) is used to illustrate these stages and associated choices in RAM development.     

EVALUATING THE INFLUENCE OF SOURCE BASINS ON DOWNSTREAM WATER QUALITY IN THE MISSISSIPPI RIVER1

ABSTRACT: Chemical variability in the Mississippi River during water years 1989 to 1998 was evaluated using stream discharge and water‐quality data in conjunction with the DAFLOW/BLTM hydraulic model. Model simulations were used to identify subbasin contributions of water and chemical constituents to the Mississippi River upstream from its confluence with the Ohio and the Mississippi River and at the Atchafalaya Diversion in Louisiana. Concentrations of dissolved solids, sodium, and sulfate at the Thebes site showed a general decreasing trend, and concentrations of silica and nitrate showed a general increasing trend as the percentage of discharge from the Mississippi River upstream from Grafton increased. Concentrations of most chemical constituents in the Mississippi River at the Atchafalaya Diversion exhibited a decreasing trend as the percentage of water from the Ohio River increased. Regression models were used to evaluate the importance of the source of water to the water chemistry in the Mississippi River at Thebes and the Atchafalaya Diversion. The addition of terms in regression equations to account for the percent of water from sub‐basins improved coefficients of determination for predicting chemical concentrations by as much as nine percent at the Thebes site and by as much as 48 percent at the Atchafalaya Diversion site. The addition of source‐water terms to regression equations increased the estimated annual loads of nitrate and silica delivered from the Mississippi River Basin to the Gulf of Mexico by as much as 14 and 13 percent, respectively.