Is micronucleus assay in oral exfoliated cells a suitable tool for biomonitoring children exposed to environmental pollutants? A systematic review

Environmental Science and Pollution Research - The aim of this review was to evaluate if micronucleus assay in oral exfoliated cells is a suitable tool for biomonitoring children exposed to...     

Microbial Source Tracking Analysis Using Viral Indicators in Santa Lucía and Uruguay Rivers,Uruguay

The aim of this study was to determine the origin (human, bovine or porcine) and the concentration of the fecal sources of contamination in waters from Santa Lucía basin and Uruguay River in Uruguay by using host-specific viral markers (adenoviruses and polyomaviruses) as microbial source tracking (MST). Between June 2015 and May 2016, monthly collections of surface water samples were performed in six sites in Santa Lucía basin and four sites in Uruguay River (n = 120 samples). Viral concentration was carried out using an absorption-elution method. Detection and quantification of human and porcine adenovirus (HAdV and PAdV, respectively) and human and bovine polyomavirus (HPyV and BoPyV, respectively) were performed by quantitative PCR (qPCR). To evaluate the infectivity of circulating HAdV, an integrated cell culture-qPCR (ICC-qPCR) was used. A logistic regression analysis was carried out to estimate the influence of environmental variables on the virus presence in surface waters. Overall, HAdV was the prevalent (18%; 21/120) followed by BoPyV (11%; 13/120) and HPyV (3%; 3/120), whereas PAdV was not detected in this study. The mean concentration ranged from 1.5 × 10⁴ genomic copies/L (gc/L) for HAdV to 1.8 × 10² gc/L for HPyV. Infective HAdVs were observed in two out of ten analyzed samples. A significant effect of environmental temperature (p = 0.001) and river (p = 0.012) on the presence of human viruses was found. These results suggest that fecal contamination could affect the water quality of these rivers, showing deficiencies in the procedure of sewage discharge from regional cities, livestock and dairy farms.

     

Prediction of Musculoskeletal Discomfort in a Pick and Place Task (A pilot study)

A pilot study was conducted regarding the effects of working posture, handling frequency, and task duration on musculoskeletal discomfort. Participants rated their discomfort perceived while performing a repetitive task at 8 different combinations of manipulations. Pauses between the work periods lasted 15 min. Discomfort was rated according to Borg’s category-ratio scale CR-10 and postures were recorded by an optoelectronic movement registration system. From linear multiple regression analysis equations for predicting discomfort at various body regions were obtained. Coefficients of determination especially point to trunk inclination and handling frequency as major determinants of musculoskeletal discomfort.     

Vulnerability of the South African farming sector to climate change and variability: An indicator approach

This paper analyses the vulnerability of South African agriculture to climate change and variability by developing a vulnerability index and comparing vulnerability indicators across the nine provinces of the country. Nineteen environmental and socio‐economic indicators are identified to reflect the three components of vulnerability: exposure, sensitivity, and adaptive capacity. The results of the study show that the regions most exposed to climate change and variability do not always overlap with those experiencing high sensitivity or low adaptive capacity. Furthermore, vulnerability to climate change and variability is intrinsically linked with social and economic development. The Western Cape and Gauteng provinces, which have high levels of infrastructure development, high literacy rates, and low shares of agriculture in total GDP, are relatively low on the vulnerability index. In contrast, the highly vulnerable regions of Limpopo, Kwazulu‐Natal and the Eastern Cape are characterised by densely populated rural areas, large numbers of small‐scale farmers, high dependency on rain‐fed agriculture and high land degradation. These large differences in the extent of vulnerability among provinces suggest that policymakers should develop region‐specific policies and address climate change at the local level.     

Monitoring an outdoor smoking area by means of PM<Subscript>2.5</Subscript> measurement and vegetal biomonitoring

The extension of pollutant accumulation in plant leaves associated with its genotoxicity is a common approach to predict the quality of outdoor environments. However, this approach has not been used to evaluate the environmental quality of outdoor smoking areas. This study aims to evaluate the effects of environmental tobacco smoke (ETS) by assessing particulate matter 2.5 μm (PM_2.5) levels, the pollen abortion assay, and trace elements accumulated in plant leaves in an outdoor smoking area of a hospital. For this, PM_2.5 was measured by active monitoring with a real time aerosol monitor for 10 days. Eugenia uniflora trees were used for pollen abortion and accumulated element assays. Accumulated elements were also assessed in Tradescantia pallida leaves. The median concentration of PM_2.5 in the smoking area in all days of monitoring was 66 versus 34 μg/m³ in the control area (P?<?0.001). In addition, the elements Al, Cd, Cu, Ni, Pb, Rb, Sb, Se, and V in Tradescantia pallida and Al, Ba, Cr, Cu, Fe, Mg, Pb, and Zn in Eugenia uniflora were in higher concentration in the smoking area when compared to control area. Smoking area also showed higher rate of aborted grains (26.1?±?10.7 %) compared with control (17.6?±?4.5 %) (P?=?0.003). Under the study conditions, vegetal biomonitoring proved to be an effective tool for assessing ETS exposure in outdoor areas. Therefore, vegetal biomonitoring of ETS could be a complement to conventional analyses and also proved to be a cheap and easy-handling tool to assess the risk of ETS exposure in outdoor areas.     

On the geotechnical characterisation of the polluted submarine sediments from Taranto

This paper reports the results of the first geomechanical laboratory experiments carried out on the polluted submarine clayey sediments of the Mar Piccolo in Taranto (South of Italy). The study had to face with extreme difficulties for the very soft consistency of the sediments and the contaminants. The mineralogy, composition and physical properties of the sediments were analysed, along with their compression and shearing behaviour. The investigation involved sediments up to about 20 m below the seafloor, along three vertical profiles in the most polluted area of the Mar Piccolo, facing the Italian Navy Arsenal. The experimental results were used to derive a preliminary geotechnical model of the site, necessary for the selection and design of the most sustainable in situ mitigation solutions. Moreover, the experimental data reveal that the clayey sediments of the most polluted top layer do not follow the classical geotechnical correlations for normally consolidated deposits. This seems to open interesting perspectives about the effects of pollutants on the geotechnical behaviour of the investigated sediments.     

Ecosystem services and biodiversity conservation under forestation scenarios: options to improve management in the Vez watershed,NW Portugal

Ensuring forest protection and the delivery of forest ecosystem services is a central aim of the European Union’s biodiversity strategy for 2020. Therefore, accurate modelling and mapping of ecosystem services as well as of biodiversity conservation value is an important asset in support of spatial planning and policy implementation. The objectives of this study were to analyse the provision of the multiple ecosystem services under two forestation scenarios (eucalyptus/pine vs. oak) at the watershed scale and to evaluate their possible trade-offs with the biodiversity conservation value. The Vez watershed, in northwest Portugal, was used as case study area, in which soil and water assessment tool (SWAT) was applied to simulate the provision of hydrological services, biomass and carbon storage services. Biodiversity conservation value was based on nature protection regimes and on expert judgement applied to a land cover map. Results indicated large provision of ecosystem services in the high and low mountain sub-basins. The overall performance for water quantity and timing is better under the shrubland and oak forest scenarios, when compared to the eucalyptus/pine forest scenario, which perform better for flood regulation and erosion control services, especially in the low mountain sub-basin. The current shrubland dominated cover also shows good performance for the control of soil erosion. The oak scenario is the one with less trade-offs between forest services and biodiversity conservation. Results highlight SWAT as an effective tool for modelling and mapping ecosystem services generated at the watershed scale, thereby contributing to improve the options for land management.     

Predicting regional space–time variation of PM2.5 with land-use regression model and MODIS data

Purpose  

Existing land-use regression (LUR) models use land use/cover, population, and traffic information to predict long-term intra-urban variation of air pollution. These models are limited to explaining spatial variation of air pollutants, and few of them are capable of addressing temporal variability. This article proposes a space–time LUR model at a regional scale by incorporating aerosol optical depth (AOD) data from the Moderate Resolution Imaging Spectroradiometer (MODIS).     

Environmental and health effects of nanomaterials in nanotextiles and façade coatings

Engineered nanomaterials (ENM) are expected to hold considerable potential for products that offer improved or novel functionalities. For example, nanotechnologies could open the way for the use of textile products outside their traditional fields of applications, for example, in the construction, medical, automobile, environmental and safety technology sectors. Consequently, nanotextiles could become ubiquitous in industrial and consumer products in future. Another ubiquitous field of application for ENM is fa?ade coatings. The environment and human health could be affected by unintended release of ENM from these products. The product life cycle and the product design determine the various environmental and health exposure situations. For example, ENM unintentionally released from geotextiles will probably end up in soils, whereas ENM unintentionally released from T-shirts may come into direct contact with humans and end up in wastewater. In this paper we have assessed the state of the art of ENM effects on the environment and human health on the basis of selected environmental and nanotoxicological studies and on our own environmental exposure modeling studies. Here, we focused on ENM that are already applied or may be applied in future to textile products and fa?ade coatings. These ENM's are mainly nanosilver (nano-Ag), nano titanium dioxide (nano-TiO(2)), nano silica (nano-SiO(2)), nano zinc oxide (nano-ZnO), nano alumina (nano-Al(2)O(3)), layered silica (e.g. montmorillonite, Al(2)[(OH)(2)/Si(4)O(10)]nH(2)O), carbon black, and carbon nanotubes (CNT). Knowing full well that innovators have to take decisions today, we have presented some criteria that should be useful in systematically analyzing and interpreting the state of the art on the effects of ENM. For the environment we established the following criteria: (1) the indication for hazardous effects, (2) dissolution in water increases/decreases toxic effects, (3) tendency for agglomeration or sedimentation, (4) fate during waste water treatment, and (5) stability during incineration. For human health the following criteria were defined: (1) acute toxicity, (2) chronic toxicity, (3) impairment of DNA, (4) crossing and damaging of tissue barriers, (5) brain damage and translocation and effects of ENM in the (6) skin, (7) gastrointestinal or (8) respiratory tract. Interestingly, some ENM might affect the environment less severely than they might affect human health, whereas the case for others is vice versa. This is especially true for CNT. The assessment of the environmental risks is highly dependent on the respective product life cycles and on the amounts of ENM produced globally.     

How global conditions impact regional agricultural production and nitrogen surpluses in the German Elbe River Basin

Agricultural land use has shifted towards more intensified production because the prices of agricultural products have increased during the past years. Just a few years ago, voluntary area set-aside was a lucrative alternative in some regions. But nowadays, land is re-cultivated again, inter alia with biomass crops. Consequently, this affects the soil and nutrient balances in agriculture. The global changes on the world markets influence agricultural production and thus the water cycle at the regional scale. In this paper, the regional developments and policy alternatives are discussed for the Elbe River Basin. The paper concludes that on average, no substantial effects of nitrogen surpluses are expected for the Elbe River Basin due to a continuing decline in animal herds. However, at the county level, nitrogen surpluses are likely to exceed the maximum threshold of 60 kg nitrogen per hectare (stipulated in the German Fertiliser Regulation) due to regional concentrations of animal production. A halving of the threshold to 30 kg per hectare shows that the marginal costs of nitrogen surplus reduction regionally exceeded 10 Euros per kilogram nitrogen.