Inactivation of Cryptosporidium by ozone and cell ultrastructures

The fluorescence staining method and scanning electron microscopy (SEM) were used to study the effect of ozone (O3) inactivating Cryptosporidium in water and cell ultrastructures variation to shed light on the mechanism of inactivation preliminarily.Results indicated that O3 had a stronger inactivating capability.When the concentration of O3 was above 3.0 mg/L and the contact time was up to 7 min,a significant inactivating effect could be achieved.The turbidity on inactivation effects was also found to be statistically significant in artificial water.With increases in turbidity,the inactivating effect decreased.Inactivation rate improved with a temperature increase from 5 to 25°C,but decreased beyond this.The inactivating capability of O3 was found to be stronger under acidic than that under alkalic conditions.When the concentration of organic matter in the reaction system was increased,the competition between Cryptosporidium and organics with O3 probably took place,thereby reducing the inactivation rate.In addition,the cellular morphology of Cryptosporidium varied with different contact times.At zero contact time,cells were rotundity and sphericity,at 60 sec they became folded,underwent emboly,and burst at 480 sec,the cell membrane of Cryptosporidium shrinked and collapsed completely.     

Adapting to climate change through local municipal planning: barriers and challenges

Municipal planning represents a key avenue for local adaptation, but is subject to recognised constraints. To date, these constraints have focused on simplistic factors such as limited resources and lack of information. In this paper we argue that this focus has obscured a wider set of constraints which need to be acknowledged and addressed if adaptation is likely to advance through municipal planning. Although these recognised constraints are relevant, we argue that what underpins these issues are more fundamental challenges affecting local, placed-based planning by drawing on the related field of community-based environmental planning (CBEP). In considering a wider set of constraints to practical attempts towards adaptation, the paper considers planning based on a case study of three municipalities in Sydney, Australia in 2008. The results demonstrate that climate adaptation was widely accepted as an important issue for planning conducted by local governments. However, it was yet to be embedded in planning practice which retained a strong mitigation bias in relation to climate change. In considering the case study, we draw attention to factors thus far under-acknowledged in the climate adaptation literature. These include leadership, institutional context and competing planning agendas. These factors can serve as constraints or enabling mechanisms for achieving climate adaptation depending upon how they are exploited in any given situation. The paper concludes that, through addressing these issues, local, place-based planning can play a greater role in achieving climate adaptation.     

Development and testing of a micro wind tunnel for on-site wind erosion simulations

Wind erosion processes affect soil surfaces across all land uses worldwide. Understanding the spatial and temporal scales of wind erosion is a challenging undertaking because these processes are diverse and highly variable. Wind tunnels provide a useful tool as they can be used to simulate erosion at small spatial scales. Portable wind tunnels are particularly valued because erosion can be simulated on undisturbed soil surfaces in the field. There has been a long history of use of large portable wind tunnels, with consensus that these wind erosion simulation tools can meet real world aerodynamic criteria. However, one consequence of striving to meet aerodynamic reality is that the size of the tunnels has increased, making them logistically difficult to work with in the field and resulting in a tendency to homogenise naturally complex soil surfaces. This homogenisation is at odds with an increasing awareness of the importance that small scale processes have in wind erosion. To address these logistical and surface homogenisation issues we present here the development and testing of a micro wind tunnel (MWT) designed to simulate wind erosion processes at high spatial resolution. The MWT is a duct-type design—0.05 m tall 0.1 m wide and with a 1.0 m working section. The tunnel uses a centrifugal motor to suck air through a flow‐conditioning section, over the working section and then through a sediment collection trap. Simulated wind velocities range from 5 to 18 m s^?1, with high reproducibility. Wind speeds are laterally uniform and values of u _* at the tunnel bed (calculated by measuring the pressure gradients within the MWT) are comparable with those of larger tunnels in which logarithmic profiles can be developed. Saltation sediment can be added. The tunnel can be deployed by a single person and operated on slopes ranging from 0 to 10°. Evidence is presented here that the MWT provides new and useful understanding of the erodibility of rangelands, claypans and ore stockpiles.     

Landscape-level influences of terrestrial snake occupancy within the southeastern United States

Habitat loss and degradation are thought to be the primary drivers of species extirpations, but for many species we have little information regarding specific habitats that influence occupancy. Snakes are of conservation concern throughout North America, but effective management and conservation are hindered by a lack of basic natural history information and the small number of large-scale studies designed to assess general population trends. To address this information gap, we compiled detection/nondetection data for 13 large terrestrial species from 449 traps located across the southeastern United States, and we characterized the land cover surrounding each trap at multiple spatial scales (250-, 500-, and 1000-m buffers). We used occupancy modeling, while accounting for heterogeneity in detection probability, to identify habitat variables that were influential in determining the presence of a particular species. We evaluated 12 competing models for each species, representing various hypotheses pertaining to important habitat features for terrestrial snakes. Overall, considerable interspecific variation existed in important habitat variables and relevant spatial scales. For example, kingsnakes (Lampropeltis getula) were negatively associated with evergreen forests, whereas Louisiana pinesnake (Pituophis ruthveni) occupancy increased with increasing coverage of this forest type. Some species were positively associated with grassland and scrub/shrub (e.g., Slowinski's cornsnake, Elaphe slowinskii) whereas others, (e.g., copperhead, Agkistrodon contortrix, and eastern diamond-backed rattlesnake, Crotalus adamanteus) were positively associated with forested habitats. Although the species that we studied may persist in varied landscapes other than those we identified as important, our data were collected in relatively undeveloped areas. Thus, our findings may be relevant when generating conservation plans or restoration goals. Maintaining or restoring landscapes that are most consistent with the ancestral habitat preferences of terrestrial snake assemblages will require a diverse habitat matrix over large spatial scales.     

Long-term trends in invertebrate–habitat relationships under protected and fished conditions

Few studies examine the long-term effects of changing predator size and abundance on the habitat associations of resident organisms despite that this knowledge is critical to understand the ecosystem effects of fishing. Marine reserves offer the opportunity to determine ecosystem-level effects of manipulated predator densities, while parallel monitoring of adjacent fished areas allows separating these effects from regional-scale change. Relationships between two measures of benthic habitat structure (reef architecture and topographic complexity) and key invertebrate species were followed over 17 years at fished and protected subtidal rocky reefs associated with two southern Australian marine reserves. Two commercially harvested species, the southern rock lobster (Jasus edwardsii) and blacklip abalone (Haliotis rubra) were initially weakly associated with habitat structure across all fished and protected sites. The strength of association with habitat for both species increased markedly at protected sites 2 years after marine reserve declaration, and then gradually weakened over subsequent years. The increasing size of rock lobster within reserves apparently reduced their dependency on reef shelters as refuges from predation. Rising predation by fish and rock lobster in the reserves corresponded with weakening invertebrate–habitat relationships for H. rubra and sea urchins (Heliocidaris erythrogramma). These results emphasise that animal–habitat relationships are not necessarily stable through time and highlight the value of marine reserves as reference sites. Our work shows that fishery closures to enhance populations of commercially important and keystone species should be in areas with a range of habitat features to accommodate shifting ecological requirements with ontogenesis.     

How stable are personalities? A multivariate view of behavioural variation over long and short timescales in the sheepshead swordtail,Xiphophorus birchmanni

Many studies have revealed repeatable (among-individual) variance in behavioural traits consistent with variation in animal personality; however, these studies are often conducted using data collected over single sampling periods, most commonly with short time intervals between observations. Consequently, it is not clear whether population-level patterns of behavioural variation are stable across longer timescales and/or multiple sampling periods or whether individuals maintain consistent ranking of behaviours (and/or personality) over their lifetimes. Here, we address these questions in a captive-bred population of a tropical freshwater poeciliid fish, Xiphophorus birchmanni. Using a multivariate approach, we estimate the among-individual variance-covariance matrix (I), for a set of behavioural traits repeatedly assayed in two different experimental contexts (open-field trials, emergence and exploration trials) over long-term (56 days between observations) and short-term (4-day observation interval) time periods. In both long- and short-term data sets, we find that traits are repeatable and the correlation structure of I is consistent with a latent axis of variation in boldness. While there are some qualitative differences in the way individual traits contribute to boldness and a tendency towards higher repeatabilities in the short-term study, overall, we find that population-level patterns of among-individual behavioural (co)variance to be broadly similar over both time frames. At the individual level, we find evidence that short-term studies can be informative for an individual’s behavioural phenotype over longer (e.g. lifetime) periods. However, statistical support is somewhat mixed and, at least for some observed behaviours, relative rankings of individual performance change significantly between data sets.     

Physical characterization of the fine particle emissions from commercial aircraft engines during the Aircraft Particle Emissions eXperiment (APEX) 1–3

The fine particulate matter (PM) emissions from nine commercial aircraft engine models were determined by plume sampling during the three field campaigns of the Aircraft Particle Emissions Experiment (APEX). Ground-based measurements were made primarily at 30 m behind the engine for PM mass and number concentration, particle size distribution, and total volatile matter using both time-integrated and continuous sampling techniques. The experimental results showed a PM mass emission index (EI) ranging from 10 to 550 mg kg^?1 fuel depending on engine type and test parameters as well as a characteristic U-shaped curve of the mass EI with increasing fuel flow for the turbofan engines tested. Also, the Teflon filter sampling indicated that ～40–80% of the total PM mass on a test-average basis was comprised of volatile matter (sulfur and organics) for most engines sampled. The number EIs, on the other hand, varied from ～10¹⁵ to 10¹⁷ particles kg^?1 fuel with the turbofan engines exhibiting a logarithmic decay with increasing fuel flow. Finally, the particle size distributions of the emissions exhibited a single primary mode that were lognormally distributed with a minor accumulation mode also observed at higher powers for all engines tested. The geometric (number) mean particle diameter ranged from 9.4 to 37 nm and the geometric standard deviation ranged from 1.3 to 2.3 depending on engine type, fuel flow, and test conditions.     

Assessment of metal contaminations leaching out from recycling plastic bottles upon treatments

Background, aims, and scope  

Heavy metal contaminants in environment, especially in drinking water, are always of great concern due to their health impact. Due to the use of heavy metals as catalysts during plastic syntheses, particularly antimony, human exposure to metal release from plastic bottles has been a serious concern in recent years. The aim and scope of this study were to assess metal contaminations leaching out from a series of recycling plastic bottles upon treatments.