Regional source identification using Lagrangian stochastic particle dispersion and HYSPLIT backward-trajectory models

The main objective of this study was to investigate the capabilities of the receptor-oriented inverse mode Lagrangian Stochastic Particle Dispersion Model (LSPDM) with the 12-km resolution Mesoscale Model 5 (MM5) wind field input for the assessment of source identification from seven regions impacting two receptors located in the eastern United States. The LSPDM analysis was compared with a standard version of the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) single-particle backward-trajectory analysis using inputs from MM5 and the Eta Data Assimilation System (EDAS) with horizontal grid resolutions of 12 and 80 km, respectively. The analysis included four 7-day summertime events in 2002; residence times in the modeling domain were computed from the inverse LSPDM runs and HYPSLIT-simulated backward trajectories started from receptor-source heights of 100, 500, 1000, 1500, and 3000 m. Statistics were derived using normalized values of LSPDM- and HYSPLIT-predicted residence times versus Community Multiscale Air Quality model-predicted sulfate concentrations used as baseline information. From 40 cases considered, the LSPDM identified first- and second-ranked emission region influences in 37 cases, whereas HYSPLIT-MM5 (HYSPLIT-EDAS) identified the sources in 21 (16) cases. The LSPDM produced a higher overall correlation coefficient (0.89) compared with HYSPLIT (0.55-0.62). The improvement of using the LSPDM is also seen in the overall normalized root mean square error values of 0.17 for LSPDM compared with 0.30-0.32 for HYSPLIT. The HYSPLIT backward trajectories generally tend to underestimate near-receptor sources because of a lack of stochastic dispersion of the backward trajectories and to overestimate distant sources because of a lack of treatment of dispersion. Additionally, the HYSPLIT backward trajectories showed a lack of consistency in the results obtained from different single vertical levels for starting the backward trajectories. To alleviate problems due to selection of a backward-trajectory starting level within a large complex set of 3-dimensional winds, turbulence, and dispersion, results were averaged from all heights, which yielded uniform improvement against all individual cases.     

Impacts of natural weathering on the transformation/neoformation processes in landfilled MSWI bottom ash: a geoenvironmental perspective

Natural weathering processes are significant mechanisms that noticeably affect the fundamental nature of incineration ash residues. To provide a greater understanding of these processes, a MSWI (mono)landfill site in the north east of the US was selected as the target for systematic investigation of the natural weathering of bottom ash residues. Samples of various ages were collected from locations A (1 yr), B (10 yrs), C (13-14 yrs) and D (20 yrs) of the landfill in 2009. We investigated the phase transformation of the collected bottom ash particles, neoformation processes as well as the behavior and distribution of certain heavy metals (Cu, Pb, Zn, Ni, and Cr) in the neoformed phases using optical microscopy, SEM-EDX, and bulk examinations. Key findings: at the preliminary stage, the waste metallic particles (Al, Fe, and Cu) and unstable minerals such as lime, portlandite, ettringite and hydrocalumite convert to oxide and hydroxide (hydrate) phases, calcite, alumina gel and gypsum. At the intermediate stage, the decomposition of melt products including magnetite spinels and metallic inclusions is triggered due to the partial dissolution of the melt glass. At the longer time horizon it is possible to track the breakdown of the glass phase, the extensive formation of calcite and anhydrite, Al-hydrates and more stable Fe-hydrates all through the older ash deposits. Among the dominant secondary phases, we propose the following order based on their direct metal uptake capacity: Fe-hydrates>Al-hydrates>calcite. Calcite was found to be the least effective phase for the direct sorption of heavy metals. Based on overall findings, a model is proposed that demonstrates the general trend of ash weathering in the landfill.     

The ISB model (infrastructure, service, behaviour): a tool for waste practitioners

In response to the EU Landfill Directive and the challenge of mitigating climate change, the UK government (nationally and locally) must develop strategies and policies to reduce, recycle, compost and recover waste. Best practice services that yield high recycling rates, such as alternate weekly collections, are now largely mainstream in suitable areas. However, national recycling performance is short of what is needed; policy makers must look for innovative ways to meet challenging recycling targets.Increasingly, local authorities are using behaviour change interventions to encourage the public to recycle; these tend to be based on the premise that an individuals’ behaviour is predetermined by their values. In practice, this has led to a host of initiatives that attempt to change individuals’ behaviour without addressing situational barriers. In this paper, we argue that that a behaviour-centric approach has limited effectiveness. Using an analysis of the literature and studies that investigated recycling participation in the city of Portsmouth, we have identified three significant clusters that can facilitate effective recycling: infrastructure, service and behaviour (ISB). We present the ISB model - a tool that can be used by waste practitioners when planning interventions to maximise recycling to better understand the situation and context for behaviour. Analysis using the ISB model suggests that current best practice, “business as usual” interventions could realistically achieve a national recycling rate of 50%. If the UK is to move towards zero waste, policy makers must look “upstream” for interventions that change the situational landscape.     

Accidents, claiming, and regional subcultures: are medical errors and malpractice lawsuits related to social capital?

METHOD: This study examined states' performance on Patient Safety Indicators (PSIs), statistics on malpractice lawsuits, and analogous data on automobile accidents to identify state-level patterns in safety and claiming. RESULTS: Hospital safety varied in a pattern similar to highway safety on the state level, suggesting that cultural traits may play a greater role than differences in legal or other environmental factors. States performing well or poorly in hospital and driver safety tended to correspond with states grouped together in regional culture typologies developed by Elazar and Lieske. Traits of regional culture also are associated with variations in tort claiming. CONCLUSIONS: The paper offers a theory of social capital as an important factor affecting safety and tort claiming. Where the regional culture is one of high cohesion and trust, people may exercise a higher degree of caution and vigilance in their interaction with others, and feel less inclination to file lawsuits subsequent to accidents.     

Nuclear magnetic resonance logging: Example applications of an emerging tool for environmental investigations

Nuclear magnetic resonance (NMR) geophysical tools have been widely used in the petroleum exploration industry since the 1960s and have improved significantly in the last two decades. These tools can provide estimates of bulk porosity and fluid content, quantification of bound versus mobile fluids, and estimates of hydraulic conductivity (K). Although the size and cost of oil‐field tools historically limited their use for near‐surface applications, smaller and more economical downhole NMR logging tools are now available for detecting and characterizing the formation water content and K to support environmental and groundwater resource investigations. These tools can be deployed using direct‐push drilling techniques or they can be lowered into existing open borings or wells with nonconductive polyvinyl chloride casings and screens. In many cases, using the tool in existing wells offers a safer and more cost‐effective alternative compared to drilling new boreholes. For environmental investigations, NMR can provide useful high‐resolution quantitative hydrostratigraphic information that can provide additional valuable data to further inform and refine the conceptual site model. This paper highlights several NMR field investigations that demonstrate the viability of this technology as a site characterization tool for near‐surface investigations. NMR measurements were compared to data from lithologic logs, cone penetrometer testing data, and prior field hydraulic tests. Use of NMR to detect vadose zone water, including previously unidentified perched groundwater zones, provided hydrostratigraphic details that could not be gleaned from historical well drilling logs and were used to evaluate drainable pore water versus pore water bound in small pores by capillary forces or electrochemically clay‐bond water. NMR also produced K estimates similar to those from conventional hydraulic tests, but the improved vertical resolution from NMR provided additional information regarding the vertical heterogeneity of the formation along the entire length of the well or borehole. Additionally, bench‐scale tests are presented that confirm the capability for NMR to reliably detect and quantify light nonaqueous phase liquid saturation (specifically diesel fuel and weathered gasoline) in situ. The field tests combined with bench‐scale testing results affirm the applicability and potential for NMR as a practical characterization tool that should increasingly be utilized in environmental investigations.     

Natural concentrations and reference values of heavy metals in sedimentary soils in the Brazilian Amazon

The soils of the Brazilian Amazon exhibit large geochemical diversity reflecting the different soil formation processes in an area covering 49% of the Brazilian territory. Soil contamination by heavy metals is one of the threats to the sustainability of this Biome but establishing quality reference values (QRVs) for the region is a challenging owing to the immense territorial area of the Amazon. This study aimed to determine the natural background of heavy metals in soils from the southwestern Brazilian Amazon in order to propose QRVs for Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sb, and Zn for alluvial sedimentary soils. One hundred and twenty-eight soil samples were collected at a depth of 0.0–0.2 m in sites with minimal anthropogenic interference. Soil sample digestion was based on the EPA 3051A method and metal concentrations were determined by ICP-OES. QRVs calculated for the southwestern Brazilian Amazon are among the lowest recorded in Brazil (mg kg^?1): Ba (16.5), Cd (0.1), Cr (6.9), Cu (2.8), Fe (15.4), Mn (13.4), Ni (1.7), Pb (4.4), Sb (0.9), and Zn (5.7). The low metal concentration is likely a result of the sedimentary origin of the soils. The results of this study can serve as a basis for defining public policies to investigate the environmental impacts resulting from changes in land use in areas of the Brazilian Amazon.     

Microplastics pollution and reduction strategies

Microplastic particles smaller than 5 mm in size are of increasing concern, especially in aquatic environments, such as the ocean. Primary source is microbeads (<1 mm) used in cosmetics and cleaning agents and fiber fragments from washing of clothes, and secondary source such as broken down plastic litter and debris. These particles are mostly made from polyethylene (PE), polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) and polyesters. They are ingested by diverse marine fauna, including zooplanktons, mussel, oyster, shrimp, fish etc. and can enter human food chains via several pathways. Strategy for control of microplastics pollution should primarily focus on source reduction and subsequently on the development of cost-effective clean up and remediation technologies. Recent research results on biodegradation of plastics have revealed a potential for microbial biodegradation and bioremediation of plastic pollutants, such as PE, PS and PET under appropriate conditions.     

Panarchy use in environmental science for risk and resilience planning

Environmental sciences have an important role in informing sustainable management of built environments by providing insights about the drivers and potentially negative impacts of global environmental change. Here, we discuss panarchy theory, a multi-scale hierarchical concept that accounts for the dynamism of complex socio-ecological systems, especially for those systems with strong cross-scale feedbacks. The idea of panarchy underlies much of system resilience, focusing on how systems respond to known and unknown threats. Panarchy theory can provide a framework for qualitative and quantitative research and application in the environmental sciences, which can in turn inform the ongoing efforts in socio-technical resilience thinking and adaptive and transformative approaches to management.     

Demonstrating the In Situ Biodegradation Potential of Phenol Using Bio‐Sep® Bio‐Traps® and Stable Isotope Probing

The effect of phenol concentration on phenol biodegradation at an industrial site in the south of Wales, United Kingdom, was investigated using standard Bio‐Sep^® Bio‐Traps^® and Bio‐Traps^® coupled with stable isotope probing (SIP). Unlike many ¹³C‐amendments used in SIP studies (such as hydrocarbons) that physically and reversibly adsorb to the activated carbon component of the Bio‐Sep^® beads, phenol is known to irreversibly chemisorb to activated carbon. Bio‐Traps^® were deployed for 32 days in nine site groundwater monitoring wells representing a wide range of phenol concentrations. Bio‐Traps^® amended with ¹³C‐phenol were deployed together with non‐amended Bio‐Traps® in three wells. Quantitative polymerase chain reaction (qPCR) analysis of Bio‐Traps^® post‐deployment indicated an inhibitory effect of increasing phenol concentration on both total eubacteria and aerobic phenol‐utilizing bacteria as represented by the concentration of phenol hydroxylase gene. Despite the chemisorption of phenol to the Bio‐Sep^® beads, activated carbon stable isotope analysis showed incorporation of ¹³C into biomass and dissolved inorganic carbon (DIC) in each SIP Bio‐Trap^® indicating that chemisorbed amendments are bioavailable. However, there was a clear effect of phenol concentration on ¹³C incorporation in both biomass and DIC confirming phenol inhibition. These results suggest that physical reductions of the phenol concentrations in some areas of the plume will be required before biodegradation of phenol can proceed at a reasonable rate. © 2013 Wiley Periodicals, Inc.     

Field Performance of Point Velocity Probes at a Tidally Influenced Site

Conventional methods to estimate groundwater velocity that rely on Darcy's Law and average hydrogeologic parameter values are insensitive to local‐scale heterogeneities and anisotropy that control advective flow velocity and direction. Furthermore, at sites that are tidally influenced or have extraction wells with variable pumping schedules, infrequent water‐level measurements may not adequately characterize the range and significance of transient hydraulic conditions. The point velocity probe (PVP) is a recently developed instrument capable of directly measuring local‐scale groundwater flow velocity and direction. In particular, PVPs may offer distinct advantages for sites with complex groundwater–surface water interactions and/or with spatially and temporally variable groundwater flow conditions. The PVP utilizes a small volume of saline tracer and inexpensive sensors to directly measure groundwater flow direction and velocity in situ at the centimeter‐scale and discrete times. The probes are installed in conventional direct‐push borings, rather than in wells, thus minimizing the changes and biases in the local flow field caused by well installation and construction. Six PVPs were installed at a tidally influenced site in North Carolina to evaluate their implementability, performance, and potential value as a new site characterization tool. For this study, a new PVP prototype was developed using a rapid prototyping machine (i.e., a “three‐dimensional printer'') and included both horizontally and vertically oriented tracer detectors. A site‐specific testing protocol was developed to account for the spatially and temporally variable hydraulic conditions and groundwater salinity. The PVPs were tested multiple times, and the results were compared to the results of several different groundwater flux and velocity estimation tools and methods, including a heat‐pulse flowmeter, passive flux meters, single‐well tracer tests, and high‐resolution hydraulic gradient analysis. Overall, the results confirmed that the PVP concept is valid and demonstrated that reliable estimates of groundwater velocity and direction can be obtained in simple settings. Also, PVPs can be successfully installed by conventional methods at sites where the formation consists primarily of noncohesive soils and the water table is relatively shallow. Although some PVP tests yielded consistent and reliable results, several tests did not. This is likely due to the highly transient flow conditions and limitations associated with the PVP design and testing procedures. PVPs offer particular advantages over, and can effectively complement, other groundwater flow characterization techniques for certain conditions, and objectives may be useful for characterizing complex flow patterns under steady conditions; however, this study suggests that PVPs are best suited for conditions where the flow hydraulics are not highly transient. For sites where the hydraulic conditions are highly transient, the most reliable approach for understanding groundwater flow behavior and groundwater–surface water interactions would generally involve both a high‐resolution hydraulic gradient analysis and another local‐scale method, such as tracer testing. This study also highlighted some aspects of the current PVP design and testing protocol that can be improved upon, including a more robust connection between the PVP and injection line and further assessment of tracer solution density effects on vertical flow. © 2013 Wiley Periodicals, Inc.