Spotting of Automotive Finishes from the Interactions Between Dry Deposition of Crustal Material and Wet Deposition of Sulfate

During the summer of 1988, General Motors Research Laboratories operated a mobile atmospheric research laboratory in Jacksonville, Florida to determine the cause of environmentally- related damage that occurs on automotive finishes In many parts of the U.S. The damage occurs as circular, elliptical, or irregular spots that appear as deposits or precipitates. The results of the present study show that a wetting event (rain or dew) is a prerequisite for damage to occur. Sulfuric acid contained in the rain or dew reacts on surfaces with drydeposited calcium which Is a common constituent of soli. As the droplets evaporate, a calcium sulfate precipitate forms on horizontal surfaces around the perimeter of the droplet. Subsequent washing of the surface may remove the precipitate, but on clearcoats, where the calcium sulfate was present, scars remain.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 10. Potential Ambient O3 Standards to Limit Soybean Crop Reduction

Soybean percent crop reduction was estimated as a function of ambient O₃ concentrations for each of 80 agricultural sites in the National Aerometric Data Bank (NADB) for each available year of data for years 1981-1985. Fourteen O₃ concentration statistics were calculated for each of the resulting 320 site-years of data. The two statistics that correlated best with estimated crop reduction were an effective mean O₃ concentration (1 percent of variance unexplained) and an arithmetic mean O₃ concentration (4 percent unexplained). The worst correlation of the 14 was for the statistic used in the present O₃ National Ambient Air Quality Standard (NAAQS), the second highest daily maximum 1-h O₃ concentration (42 percent unexplained). The number of site-years for estimated percent soybean yield reductions was plotted versus increasing O₃ concentrations for each of the 14 O₃ statistics. A maximum crop reduction line was drawn on each plot. These lines were used to estimate (and list) potential ambient O₃ standards for each of the 14 statistics that would limit soybean crop reduction at agricultural. NADB sites to 5, 10, 15, or 20 percent.     

Compositions and greenhouse gas emission factors of flared and vented gas in the Western Canadian Sedimentary Basin

A significant obstacle in evaluating mitigation strategies for flaring and venting in the upstream oil and gas industry is the lack of publicly available data on the chemical composition of the gas. This information is required to determine the economic value of the gas, infrastructure and processing requirements, and potential emissions or emissions credits, all of which have significant impact on the economics of such strategies. This paper describes a method for estimating the composition of solution gas being flared and vented at individual facilities, and presents results derived for Alberta, Canada, which sits at the heart of the Western Canadian Sedimentary Basin. Using large amounts of raw data obtained through the Alberta Energy Resources Conservation Board, a relational database was created and specialized queries were developed to link production stream data, raw gas samples, and geography to create production-linked gas composition profiles for approximately half of the currently active facilities. These were used to create composition maps for the entire region, to which the remaining facilities with unknown compositions were geographically linked. The derived data were used to compute a range of solution gas composition profiles and greenhouse gas emission factors, providing new insight into flaring and venting in the region and enabling informed analysis of future management and mitigation strategies.

Implications: Accurate and transparent determination of environmental impacts of flaring and venting of gas associated with oil production, and potential benefits of mitigation, is severely hampered by the lack of publicly available gas composition data. In jurisdictions within the Western Canadian Sedimentary Basin, frameworks exist for regulating and trading carbon offset credits but current potential for mitigation is limited by a lack of standardized methods for calculating CO₂ equivalent emissions. The composition and emission factor data derived in this paper will be useful to industry, regulators, policy researchers, and entrepreneurs seeking statistically significant and openly available data necessary to manage and mitigate upstream flaring and venting activity and estimate greenhouse gas impacts.     

An analysis of flaring and venting activity in the Alberta upstream oil and gas industry

Alberta, Canada, is an important global producer of petroleum resources. In association with this production, large amounts of gas (1.14 billion m3 in 2008) are flared or vented. Although the amount of flaring and venting has been measurably reduced since 2002, data from 2005 reveal sharp increases in venting, which have important implications in terms of resource conservation and greenhouse gas emissions (which exceeded 8 million tonnes of carbon dioxide equivalent in 2008). With use of extensive monthly production data for 18,203 active batteries spanning the years 2002-2008 obtained in close cooperation with the Alberta Energy Resources Conservation Board, a detailed analysis has been completed to examine activity patterns of flaring and venting and reasons behind these trends in the Alberta upstream oil and gas industry. In any given year, approximately 6000 batteries reported flaring and/or venting, but the distribution of volumes flared and vented at individual sites was highly skewed, such that small numbers of sites handled large fractions of the total gas flaring and venting in the Province. Examination of month-to-month volume variability at individual sites, cast in terms of a nominal turndown ratio that would be required for a compressor to capture that gas and direct it into a pipeline, further revealed that volumes at a majority of sites were reasonably stable and there was no evidence that larger or more stable sites had been preferentially reduced, leaving potential barriers to future mitigation. Through linking of geospatial data with production data coupled with additional statistical analysis, the 31.2% increase in venting volumes since 2005 was revealed to be predominantly associated with increased production of heavier oils and bitumen in the Lloydminster region of the Province. Overall, the data suggest that quite significant reductions in flaring and venting could be realized by seeking mitigation solutions for only the largest batteries in the Province.     

Accumulation of 14C-trinitrotoluene and related nonextractable (bound) residues in Eisenia fetida

To determine if trinitrotoluene (TNT) forms nonextractable residues in earthworms and to measure the relative degree of accumulation as compared to TNT and its deaminated metabolites, Eisenia fetida was exposed to ¹⁴C-TNT using dermal contact to filter paper or exposure to soil. Nonextractable residues made up 32-68% of total body burden depending on exposure media and depuration time. Parent TNT accounted for less than 3% of radioactivity, while ADNTs accounted for 7-38%. Elimination half-lives were 61-120 h for TNT, ADNTs, and DANTs, which was significantly lower than the half-lives found for nonextractable residues, 201-240 h. However, over 80% of the nonextractable residue was solubilized using weak acid (pH 2). Based on our findings that TNT accumulation occurs primarily as nonextractable residues, which have a longer half-life, and that nonextractable residues can be solubilized, we propose that nonextractable residues could be used as a selective biomarker for assessing TNT contamination.     

Physical impact of waterjet‐based sediment remediation on benthic organisms

Adding activated carbon to sediments has been shown to be an effective means of reducing the bioavailability of certain contaminants. The current state of the practice is to mechanically mix activated carbon to a target concentration of 3 percent at depths of approximately 30 cm using a rotovator or similar construction equipment. Waterjets have been used to cut hard material using a mixture of water and an abrasive. If activated carbon is substituted for the abrasive, waterjets have the potential to use surface injection as a replacement for mechanical mixing during sediment remediation. A perceived benefit of waterjet‐based sediment remediation is that there may be a reduced potential for benthic organism mortality related to amendment delivery. A set of waterjet parameters were identified that have the potential to achieve amendment placement goals, and a series of waterjet tests were conducted to evaluate the potential impact on the benthic community. The tests included mortality testing using a swimming macroinvertebrate and a burrowing invertebrate, benthic artifacts such as shells, and craft foam as a surrogate for living organisms. The results indicated that the immediate survivability was typically greater than 50 percent, and that empirical relationships between two variables (waterjet nozzle diameter and the water column height between the nozzle and the target) and the depth of cut in the foam could be established. Data are not available in the literature for direct comparison of organism survivability immediately after mechanical mixing, but the results of this study provide motivation for the further evaluation of waterjets on the basis of the low observed mortality rates. Future waterjet work may address field‐scale characterization of mixing effectiveness, resuspension potential, technical feasibility, and cost. © 2011 Wiley Periodicals, Inc.     

Community vulnerability and resilience in disaster risk reduction: an example from Phojal Nalla,Himachal Pradesh,India

International Disaster Risk Reduction Frameworks and Indian Plans advocate shared responsibility for reducing disaster risk, in which community vulnerability and resilience conditions are central. This paper presents a case study from the Indian Himalaya (Kullu District) of community vulnerability and resilience conditions following damaging floods, primarily the 1994 Phojal Nalla flood, through the concepts of community heritage and capital. Data were collected in the period 2013–2016, using semi-structured interviews (n?=?129), village reconnaissance and archival/contemporary data searches. The connections between heritage, capital, vulnerability and resilience are complex, but results demonstrate ‘knowledge’ is the principal driver of resilience conditions, via facets of heritage (e.g. religious infrastructure and activities, traditional architectural vernacular, and multi-generational attachments to place) and capital (e.g. income diversification, access to communication technologies, societal welfare measures and positive interactions with water). Persisting vulnerabilities stem from differential access to and implementation of best practice knowledge, governed by social, economic and political conditions. Further improvements in risk reduction require greater consideration of the following: (1) the integration of community local knowledge into the overall disaster management process; (2) the opportunities offered by mobile phone and other technologies for generating and sharing knowledge across society; and (3) the value of under-utilised knowledge of past disaster events, assembled from a systematic evaluation of oral, documentary and landscape evidence, to risk reduction.     

Rhetorical Recommendations Built on Ecological Experience: A Reassessment of the Challenge of Environmental Communication

This article reconsiders the challenge of environmental communication by inquiring into the fundamental rhetorical difficulty of thinking in terms of ecology. We discuss two essential yet bewildering aspects of ecology: its focus on interconnection and its use of multiple scales. On this basis, we distil six rhetorical recommendations: a shift from appealing to pre-existing values to avenues for transforming values; a shift from arguments from authority to addressing legitimate resistances; a shift from a focus on mutual agreement to a mutual bewilderment; a shift from intellectual comprehension to personal experience; a shift from negative effects to positive connections; and, finally, a shift from a focus on political results to local transformations. We experiment with this rhetorical approach through two applications: for critical reassessments of past articulations we consider the Gaia Hypothesis and Deep Ecology, and for current refinements to environmental problems we consider controversies around Marcellus Shale gas development     

Particle size distribution predicts particulate phosphorus removal

Particulate phosphorus (PP) is often the largest component of the total phosphorus (P) load in stormwater. Fine-resolution measurement of particle sizes allows us to investigate the mechanisms behind the removal of PP in stormwater wetlands, since the diameter of particles influences the settling velocity and the amount of sorbed P on a particle. In this paper, we present a novel method to estimate PP, where we measure and count individual particles in stormwater and use the total surface area as a proxy for PP. Our results show a strong relationship between total particle surface area and PP, which we use to put forth a simple mechanistic model of PP removal via gravitational settling of individual mineral particles, based on a continuous particle size distribution. This information can help improve the design of stormwater Best management practices to reduce PP loading in both urban and agricultural watersheds.     

Status and trends of circumpolar peregrine falcon and gyrfalcon populations

Ambio - The peregrine falcon (Falco peregrinus) and the gyrfalcon (Falco rusticolus) are top avian predators of Arctic ecosystems. Although existing monitoring efforts are well established for both...