Preparation and characterization of green bricks using pharmaceutical industrial wastes

This paper reports on recycling of industrial wastes (three pharmaceutical industrial sludges) into environmental friendly value-added materials. Stabilization/Solidification (S/S or bricks) process was applied to make a safer way for the utilization of pharmaceutical waste. The additives in this study include binders (cement, lime and bentonite) and strengthening material (pulverized fuel ash (PFA), silica fume and quarry dust) was used at different compositions. Bricks were cured for 28 days, and the following analysis-like compressive strength, leachability of heavy metals, mineralogical phase identity by X-ray diffraction (XRD) spectroscopy, Fourier transform infrared spectroscopy (FTIR) and thermal behaviour by thermogravimetric-differential thermal analysis (TG-DTA) had done. All the bricks were observed to achieve the standard compressive strength as required for construction according to BIS standards. Metal concentration in the leachate has reached the dischargeable limits according to Brazilian standards. Results of this study demonstrate that production of bricks is a promising and achievable productive use of pharmaceutical sludge.     

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the “zero concept” of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.     

Efficacy of Si fertilization to modulate the heavy metals absorption by barley (Hordeum vulgare L.) and pea (Pisum sativum L.)

Silicon-based fertilizers and soil amendments can have direct and indirect positive influences on cultivated plants. The solid forms of Si-based substances, the most widespread in use, are efficient only at high application rates due to their low level of solubility. Several types of Si-based substances such as fumed silica, slags from the iron and steel industry, modified slags, and a Si-rich product were tested using barley and pea as silicon accumulative and non-accumulative plants, respectively, at two application rates. The plants were grown under toxic concentrations of heavy metals in a greenhouse. Si-rich materials high in water-soluble Si had a positive effect at both the low and high application rates, and for both plant species. This type of substance can be regarded as Si fertilizer, demonstrating greater efficiency at a low application rate and lessened efficiency at a high application rate for protection of the cultivated plants against accumulation of the heavy metals.

     

Bison and cattle grazing management,bare ground coverage,and links to suspended sediment concentrations in grassland streams

This study quantified the impact of bison and cattle grazing management practices on bare ground coverage at the watershed, riparian, and forested riparian scales within the Flint Hills ecoregion in Kansas. We tested for correlations between bare ground coverage and fluvial suspended sediment concentrations during base‐flow and storm‐flow events. We used remotely sensed imagery combined with field surveys to classify ground cover and quantify the presence of bare ground. Base‐flow water samples were collected bi‐monthly during rain‐free periods and 24 h following precipitation events. Storm‐flow water samples were collected on the rising limb of the hydrograph, using single‐stage automatic samplers. Ungrazed treatments contained the lowest coverage of bare ground at the watershed, riparian, and forested riparian scales. Bison treatments contained the highest coverage of bare ground at the watershed scale, while high‐density cattle treatments contained the highest coverage of bare ground at the riparian and forested riparian scales. In bison and cattle‐grazed treatments, a majority of bare ground was located near fence lines, watershed boundaries, and third‐ and fourth‐order stream segments. Inorganic sediment concentrations at base flow were best predicted by riparian bare ground coverage, while storm‐flow sediment concentrations were best predicted by watershed scale bare ground coverage.     

Temporal Trends in the Spatial Distribution of Impervious Cover Relative to Stream Location

Use of impervious cover is transitioning from an indicator of surface water condition to one that also guides and informs watershed planning and management, including Clean Water Act (33 U.S.C. §1251 et seq.) reporting. Whether it is for understanding surface water condition or planning and management, impervious cover is most commonly expressed as summary measurement (e.g., percentage watershed in impervious cover). We use the National Land Cover Database to estimate impervious cover in the vicinity of surface waters for three time periods (2001, 2006, 2011). We also compare impervious cover in the vicinity of surface waters to watershed summary estimates of impervious cover for classifying the spatial pattern of impervious cover. Between 2001 and 2011, surface water shorelines (streams and water bodies) in the vicinity of impervious cover increased nearly 10,000 km. Across all time periods, approximately 27% of the watersheds in the continental United States had proximally distributed impervious cover, i.e., the percentage of impervious cover in the vicinity of surface waters was higher than its watershed summary expression. We discuss how impervious cover spatial pattern can be used to inform watershed planning and management, including reporting under the Clean Water Act.     

Environmental Justice 2.0: new Latino environmentalism in Los Angeles

This paper presents the results of ethnographic research conducted with several environmental justice (EJ) organisations in Latino communities of Los Angeles, California. Traditional EJ politics revolves around research and advocacy to reduce discriminatory environmental exposures, risks, and impacts. However, I argue that in recent years there has been a qualitative change in EJ politics, characterised by four main elements: (1) a move away from the reaction to urban environmental “bads” (e.g. polluting industries) in the city towards a focus on the production of nature in the city; (2) strategies that are less dependent on the legal, bureaucratic, and technical “regulatory route”; (3) the formation of a distinctive “Latino environmental ethic” that offers a more complex consideration of the place of race in EJ organising; and (4) a spatial organisation of EJ politics that moves away from hyperlocal, vertical organisation towards diversified city-wide networks that include EJ organisations, mainstream environmental groups, nonprofits, foundations, and entrepreneurs. This shift in EJ movement politics is shaped by broader political-economic changes, including the shift from post-Fordist to neoliberal and now green economy models of urban development; the influence of neoliberal multiculturalism in urban politics; and the increasingly prominent role of Latinos in city, state, and national politics. New spaces of Latino EJ also reflect the ambitions of Los Angeles as a global city, with urban growth increasingly framed in an international discourse of sustainability that combines quality of life, environmental, and economic development rationales.     

Variability of pesticide residues in cauliflower units collected from a field trial and market places in Greece

To estimate the variability of pesticide residue levels present in cauliflower units, a total of 142 samples were collected from a field trial of a cooperative farmer, and 120 samples were collected from different market places in Thessaloniki, Greece. The collected samples were extracted using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction technique, and the residues were determined by liquid chromatography–tandem mass spectrometry. The developed method was validated by evaluating the accuracy, precision, linearity, limit of detection (LOD), and limit of quantification (LOQ). The average recoveries for all the analytes, derived from the data of control samples fortified at 0.01, 0.05, 0.1, and 0.2 mg/kg, ranged from 74 to 110% with a relative standard deviation of ≤8%. The correlation coefficient (R²) was ≥0.997 for all the analytes using matrix-matched calibration standards. The LOD values ranged from 0.001 to 0.003 mg/kg, and the LOQ was determined at 0.01 mg/kg for all the sought analytes. The matrix effect was found to be at a considerable level, especially for cypermethrin and deltamethrin, amounting to +90% and +145%, respectively. For the field samples, the unit-to-unit variability factors (VFs) calculated for cypermethrin and deltamethrin were 2.38 and 2.32, respectively, while the average VF for the market basket samples was 5.11. In the market basket samples, residues of cypermethrin, deltamethrin, chlorpyrifos, and indoxacarb were found at levels ≥LOQ and their respective VFs were 7.12, 5.67, 5.28, and 2.40.     

Latent effects of early life stage exposure to triclosan on survival in fathead minnows,Pimephales promelas

The objective of this study was to evaluate the effects of early life stage triclosan (5-chloro-2-(2,4, dichlorophenoxy)phenol, TCS) exposure on hatching, development, and survival in the fathead minnow, Pimephales promelas. Embryonic minnows were exposed to TCS (50 and 100 µg L^?1) for 10 days followed by 6 weeks depuration. Mortality and morphological deformities were recorded and quantified during exposure and at the end of depuration. No significant effects on embryonic survival, time to reach the eyed stage, or hatching were found. However, at the conclusion of the depuration period, survival was significantly reduced in TCS exposed fish depending on the concentration. Visual inspection of the exposed fish suggests that mortality is related to spinal deformities, emaciation, and reduced foraging ability. Triclosan exhibits deleterious effects in fish at lower concentrations over longer durations than previously reported. Further, mortality in exposed fish 6 weeks after exposure demonstrates the need for various exposure assays to evaluate effects of TCS.