A new THOR shoulder design: a comparison with volunteers, the Hybrid III, and THOR NT

OBJECTIVE: Since the shoulders are rarely seriously injured in frontal or oblique collisions, they have been given low priority in the development of frontal impact crash test dummies. The shoulder complex geometry and its kinematics are of vital importance for the overall dummy kinematics. The shoulder complex also influences the risk of the safety belt slipping off the shoulder in oblique forward collisions. The first aim of this study was to develop a new 50th percentile male THOR shoulder design, while the second was to compare the new shoulder, mounted on a THOR NT dummy, with volunteer, THOR NT, and Hybrid III range of motion and stiffness data. The third aim was to test the repeatability of the new shoulder during dynamic testing and to see how the design behaves with respect to belt slippage in a 45 degrees far-side collision. METHODS: The new 50th percentile THOR shoulder design was developed with the aid of a shell model of the seated University of Michigan Transportation Research Institute (UMTRI) 50th percentile male with coordinates for joints and bony landmarks (Schneider et al., 1983). The new shoulder design has human-like bony landmarks for the acromion and coracoid processes. The clavicle curvature and length are also made similar to that of a male human, as is the range of motion in the anterior-posterior, superior-inferior, and medial-lateral directions. The new shoulder design was manufactured and tested under the same conditions that T?rnvall et al. (2005b) used to compare the shoulder range of motion for the volunteers, Hybrid III, and THOR Alpha. The new design was also tested in two dynamic test configurations: the first was a 0 degrees full-frontal test and the second was a 45 degrees far-side test. The dummy tests were conducted with an R-16 seat with a three-point belt, the Delta V was 27.0+/-0.5 km/h and the maximum peak acceleration was approximately 14.6+/-0.5 g for each test. RESULTS: A new shoulder design with geometry close to that of humans was developed to be retrofitted to the THOR NT dummy. The results showed that the range of motion for the new shoulder complex during static loading was larger by at least a factor of three, for the maximum load (200 N/arm), than that of either the Hybrid III or the THOR NT; this means it was more similar to the volunteers' range of motion. It was observed that the THOR NT with the new shoulder did not slide out of the shoulder belt during a far-side collision. The performance of the new shoulder was reasonably repeatable and stable during both the static tests and the sled tests. CONCLUSION: A new shoulder for the THOR NT has been designed and developed, and data from static range of motion tests and sled tests indicate that the new shoulder complex has the potential to function in a more human-like manner on the THOR dummy.     

Improving graduated driver licensing systems: a conceptual approach and its implications

Graduated driver licensing (GDL) is a concept for how to transform non-drivers into reasonably safe drivers while minimizing the risks as they learn. Several state GDL programs can be improved by moving their structures closer to an adequate implementation of that concept. The learner stage of a GDL system needs to be long enough for beginners to obtain a thorough introduction to the vagaries of driving. The second or intermediate stage needs to effectively limit exposure to known high risk conditions as novices adapt to being fully in charge of the vehicle. The benefits of GDL to date are due almost entirely to the risk-reducing conditions it implements. To improve the functioning of GDL will probably require a better understanding of teen driving than we presently have. The likelihood of further gains will be enhanced by efforts to learn more about the actual causes of teen crashes, the nature and type of teen driver exposures, and what parents do with their teens during the supervised driving stage of GDL. Without a better understanding of these, and other, phenomena it will be difficult to further reduce crashes among young beginning drivers, whether through GDL enhancements or with other approaches.     

Choice of teenagers' vehicles and views on vehicle safety: survey of parents of novice teenage drivers

Objective

To examine parental decisions about vehicles driven by teenagers and parental knowledge of vehicle safety.

Methods

About 300 parents were interviewed during spring 2006 in Minnesota, North Carolina, and Rhode Island while teenagers took their first on-road driving tests.

Results

Fewer than half of parents surveyed said teenagers would be the primary drivers of the chosen vehicles. Parents most often cited safety, existing family vehicle, and reliability when explaining the choices for their teenagers’ vehicles. About half of the vehicles intended for teenagers were small/mini/sports cars, pickups, or SUVs — vehicles considered less safe for teenagers than midsize/large cars or minivans. A large majority of vehicles were 2001 models or earlier. Vehicles purchased in anticipation of adding a new driver to the family were more likely to be the sizes/types considered less safe than vehicles already owned. Few parents insisted on side airbags or electronic stability control, despite strong evidence of their safety benefits. Even when asked to identify ideal vehicles for their teenagers to drive, about half of parents identified less safe vehicle sizes/types. Most parents knew that midsize/large vehicles are safer than small vehicles, and at least half of parents said SUVs and pickups are not safe for teenage drivers, citing instability.

Conclusions

The majority of parents understood some of the important criteria for choosing safe vehicles for their teenagers. However, parents actually selected many vehicles for teenagers that provide inferior crash protection.

Impact on industry

Vehicle safety varies substantially by vehicle size, type, and safety features. Many teenagers are driving inferior vehicles in terms of crashworthiness and crash avoidance.     

Impact on sward composition and stock performance of grazing Molinia-dominant grassland

A comparative experiment was conducted to test the extent to which grazing of rank Molinia caerulea-dominated grassland increases botanical diversity and improves animal performance. The study was carried out on an area of under-grazed Molinia-dominant pasture that had not been stocked for 20 years. Three treatments were compared from 2001 until 2008: (1) no grazing, (2) grazing by Welsh Mountain sheep and (3) grazing by Welsh Black heifers. Patterns of change in sward surface composition across the grazing season were consistent with greater consumption of Molinia by the cattle, but there was little evidence of management regime influencing changes in sward composition year-on-year. There was a significant effect of year on animal performance (P < 0.001). Although the growth rates of the heifers improved over the course of the first three years of the experiment, this performance was not sustained. In contrast, any weight changes for the sheep were positive. The results highlight the slow pace of change within upland swards, and the need to develop site-specific grazing guidelines.     

Application of winery and distillery waste composts to a Jumilla (SE Spain) vineyard: Effects on the characteristics of a calcareous sandy-loam soil

The effects on different physico-chemical, chemical and biological soil properties of the incorporation of different organic materials into a calcareous vineyard soil were studied in an experiment during three growing seasons. The organic materials used were sheep manure and four composts derived from the treatment of winery and distillery wastes. A multivariate technique, factor analysis (FA), was also used for interpreting the data obtained from the samplings carried out throughout the three vine growing seasons. The application of the organic materials induced an increase in the activity of the soil microorganisms and in the soil macro and micronutrient contents, as well as a slow release of inorganic N. Through FA of the soil properties studied, three factors that explained 74.7% of the variability were established and the effects of the treatments after the whole experimental period were assessed.     

Radiocesium in caribou and reindeer in northern Canada, Alaska and Greenland from 1958 to 2000

This study summarizes the spatial and temporal trends of fallout (137)Cs concentrations in caribou and reindeer (Rangifer tarandus ssp.), reported in various programs in Canada, Alaska and Greenland, over a 40-y period. During the 1960s, the highest (137)Cs concentrations (2000-3000Bqkg(-1) wet weight in muscle) were found in the large caribou herds of central northern Canada, with levels about 50% lower in Alaska and Greenland. Concentrations varied by up to a factor of 6 between spring and fall. Concentrations in reindeer were comparable to those in caribou from the same regions. The highest (137)Cs concentrations (750Bqkg(-1)) in the late 1980s were found in the Caniapiscau herd of central Québec. The contribution from the Chernobyl accident in 1986 was estimated from (134)Cs measurements to be 10-40% of the total (137)Cs. Present concentrations have declined to 200-300Bqkg(-1). The effective half-life (T(eff)) of (137)Cs in Canadian caribou herds was estimated to be about 6 y. The potential impact on the health of northern residents is discussed.     

Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

137Cs in the Danish Wadden Sea: contrast between tidal flats and salt marshes

The 137Cs activity of salt marsh and tidal flat sediments of the northern part of the European Wadden Sea was studied based on a comprehensive dataset of 210Pb dated cores. The 137Cs inventory of salt marsh sediments shows a major peak corresponding to the Chernobyl accident in 1986, and a minor peak located in the late 1960s interpreted as the combined effect of atmospheric testing of nuclear weapons. Emissions from the nuclear reprocessing plant Sellafield are not reflected as peaks in 137Cs activity, but may contribute to the rising 137Cs activity in the years prior to 1986. The 137Cs activity of tidal flat sediments differs from salt marsh sediment in two respects. First, the activity is much lower and, second, the major peak in the 1980s is located in the beginning instead of in the middle of the decade. The differences in 137Cs inventory between the two environments are interpreted to result from repeated cycles of deposition/resuspension and mixing on tidal flats. A simple model illustrating the consequence of mixings returns an apparent shift of major peaks in 137Cs activities backwards in time corresponding to the mixing depth divided by the deposition rate.     

Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).     

Generic approaches to transfer

A review of methods which have been used to describe and predict transfer of radionuclides in biota was undertaken. The intent was to identify approaches that might prove useful in extending predictive estimates to other organisms and environments. Empirical approaches, such as found in the use of transfer factors, were examined. Kinetic methodologies were also presented. Allometric functions, with their ability to make broad generalizations, were also discussed. Data from several earlier radioecological assessments were tested for their potential utility in developing allometric relationships, with the result implying that such an approach might prove useful.