Fast firing of tiles containing paper mill sludge, glass cullet and clay

The paper describes results obtained in the development of a previous research. We study here, in fast firing, the sintering behaviour and measure some properties of tiles containing a mixture of 60 wt% of paper mill sludge and 40 wt% of glass cullet. The behaviour of this material is compared to those displayed by materials obtained by the same mixture added with 10, 20 and 30 wt% of a natural red clay. In parallel, the same properties are measured also on a reference blend, which is presently used to produce commercial tiles. We show that powders containing 60 wt% of paper sludge and 40 wt% of glass cullet to which 30 wt% of clay is added give rise to materials that display a stable sintering process and have good hardness and strength and therefore could be used for the industrial production of tiles.     

Lysimeter Experiments to Investigate the Fate of Chemicals in Soils – Comparison of Five Different Lysimeter Systems

Several lysimeter scenarios and approaches exist to study the fate of agro-chemicals or contaminants from deposition in soil columns. In many systems just transport and leaching of the parent compound is followed, in some systems the leaching and transport of the metabolites is investigated as well. In more sophisticated lysimeter systems the volatilization and also the mineralization of the applied chemicals can be additionally monitored. Depending on the lysimeter system used and on the fact whether the applied chemicals are ¹⁴C-labeled or not, different results and various interpretations of the results might be achieved. Different lysimeter systems are described in this paper and a real dataset of a specific lysimeter experiment was transferred and evaluated in a virtual approach in the different lysimeter systems in order to show the advantages and disadvantages of the various systems.     

MULTI INCREMENT® TCE vadose‐zone investigation

MULTI INCREMENT® and discrete sampling strategies were used to estimate the average concentration and the three‐dimensional distribution of TCE in a 3,300‐m³ zone composed of two decision units (e.g., area of concern, population, exposure unit). Authors of this article and a private contractor (Stanley Consultants Inc.), respectively, implemented these two sampling strategies independently. Compared to discrete sampling, the MULTI INCREMENT sampling strategy identified more locations where percent‐level concentrations of TCE have migrated, is more economical, and provided greater data quality. © 2008 Wiley Periodicals, Inc.     

Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

Identifying the largest individual sample value from a two-way composite sampling design

Composite sampling techniques for identifying the largest individual sample value seem to be cost effective when the composite samples are internally homogeneous. However, since it is not always possible to form homogeneous composite samples, these methods can lead to higher costs than expected. In this paper we propose a two-way composite sampling design as a way to improve on the cost effectiveness of the methods available to identify the largest individual sample value.     

Environmental levels of sediment-associated tri-n-butyltin chloride (TBTCl) and ionic regulation in flounders during seawater adaptation

The effects of exposure to sediment-associated tri-n-butyltin chloride (TBTCl) were examined in the euryhaline European flounder, Platichthys flesus (L.). The effects were quantified by measuring the changes in sodium efflux; Na⁺/K⁺-ATPase activity; and the numbers, areas, and distribution of chloride cells in the gills of freshwater-adapted fish, following a rapid transfer to seawater. Following the transfer to seawater, the Na⁺/K⁺-ATPase activity and the sodium efflux were significantly increased in the control group but remained unchanged in the TBTCl-exposed group. The normal morphological changes to the gill epithelium associated with seawater adaptation, which involve chloride cell distribution, took place in the control group but were significantly inhibited or delayed in the TBTCl group. The results presented in this study lead to the conclusion that environmental concentrations of tri-n-butyltin chloride in sediments are capable of significantly disrupting both the physiological and the morphological components of iono-regulatory functions of an estuarine flatfish.     

Chromosomal and nuclear characteristics of deep-sea hydrothermal-vent organisms: correlates of increased growth rate

A range of tissue and cell types from adult and juvenile stages of vent- and non-vent-dwelling deep-sea and shallow-water organisms were compared for signs of cell division, in preparation for a cytogenetic study of the different groups. Virtually all the Mid-Atlantic Ridge (MAR) vent species (bresiliid shrimp, bathymodiolid mussel, branchipolynoid polychaete, and a range of small gastropods) showed an abundance of metaphase chromosome spreads, indicating a generally high intrinsic rate of cell division, irrespective of their phylogenetic group. In comparison, similar tissues and life-history stages (i.e. gonad, developing eggs and gill) from two deep-sea bathypelagic crustaceans, Hymenodora and Gnathophausia, failed to yield any convincing evidence of cell division. This indicated that rates of growth and reproduction in the rest of the deep sea are extremely low. While much has been written about the contrasting growth rates of vent versus non-vent organisms, this is the first direct evidence of differences in cell-division rate between vent and non-vent species, which undoubtedly reflects contrasting conditions relating to food availability and temporal stability in these two deep-sea environments. The cells of shallow-water marine invertebrates (Mytilus, Nucella, Littorina, Pomatoceros and Crangon), based on the results of previous cytogenetic investigations, occupy an intermediate position with respect to their cell-division kinetics. When chromosome numbers, DNA content and nuclear diameters were compared between vent and non-vent species, this showed that no change had occurred in these characters since the time of vent colonisation. Representative chromosome spreads from hydrothermal-vent organisms are shown here for the first time.     

Spatial and temporal pattern in seagrass community composition and productivity in south Florida

We document the distribution and abundance of seagrasses, as well as the intra-annual temporal patterns in the abundance of seagrasses and the productivity of the nearshore dominant seagrass (Thalassia testudinum) in the south Florida region. At least one species of seagrass was present at 80.8% of 874 randomly chosen mapping sites, delimiting 12,800 km² of seagrass beds in the 17,000-km² survey area. Halophila decipiens had the greatest range in the study area; it was found to occur over 7,500 km². The range of T. testudinum was almost as extensive (6,400 km²), followed by Syringodium filiforme (4,400 km²), Halodule wrightii (3,000 km²) and Halophila engelmanni (50 km²). The seasonal maxima of standing crop was about 32% higher than the yearly mean. The productivity of T. testudinum was both temporally and spatially variable. Yearly mean areal productivity averaged 0.70 g m⁻²day⁻¹, with a range of 0.05–3.29 g m⁻² day⁻¹. Specific productivity ranged between 3.2 and 34.2 mg g⁻¹ day⁻¹, with a mean of 18.3 mg g⁻¹ day⁻¹. Annual peaks in specific productivity occurred in August, and minima in February. Integrating the standing crop for the study area gives an estimate of 1.4 × 1011 g T. testudinum and 3.6 × 10¹⁰ g S. filiforme, which translate to a yearly production of 9.4 × 10¹¹ g T. testudinum leaves and 2.4 × 10¹¹ g S. filiforme leaves. We assessed the efficacy of rapid visual surveys for estimating abundance of seagrasses in south Florida by comparing these results to measures of leaf biomass for T. testudinum and S. filiforme. Our rapid visual surveys proved useful for quantifying seagrass abundance, and the data presented in this paper serve as a benchmark against which future change in the system can be quantified. Received: 30 January 2000 / Accepted: 24 July 2000