Study on the cytotoxicity of microcystin-LR on cultured cells

The toxicity of purified blue-green algal toxin, microcystin-LR, on permanent cell lines KB, NIH/3T3, H-4-II-E, HeLa, Vero, Hep G2, Caco-2 and HL-60 was studied. Assessment of cell viability using colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays indicated that purified microcystin-LR induced toxic effect on KB and H-4-II-E cell lines after 96 h incubation at toxin concentrations greater than 18.75 microg/ml. KB cell line was selected for further study when reproducibility, consistency and sensitivity were considered. Significant amounts of lactate dehydrogenase (LDH) were released from KB cells when incubation durations were 72 and 96 h with toxin concentrations of 18.75 microg/ml and higher. Although previous studies suggested that microcystin-LR had no cytotoxic effect on permanent cell lines, LDH release assay performed on KB cells indicated that exposure to microcystin-LR could result in damage to the cell membrane.     

Priority assessment of toxic substances in life cycle assessment. Part I: calculation of toxicity potentials for 181 substances with the nested multi-media fate, exposure and effects model USES-LCA

Toxicity potentials are standard values used in life cycle assessment (LCA) to enable a comparison of toxic impacts between substances. In most cases, toxicity potentials are calculated with multi-media fate models. Until now, unrealistic system settings were used for these calculations. The present paper outlines an improved model to calculate toxicity potentials: the global nested multi-media fate, exposure and effects model USES-LCA. It is based on the Uniform System for the Evaluation of Substances 2.0 (USES 2.0). USES-LCA was used to calculate for 181 substances toxicity potentials for the six impact categories freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, freshwater sediment ecotoxicity, marine sediment ecotoxicity, terrestrial ecotoxicity and human toxicity, after initial emission to the compartments air, freshwater, seawater, industrial soil and agricultural soil, respectively. Differences of several orders of magnitude were found between the new toxicity potentials and those calculated previously.     

The influence on partial order ranking from input parameter uncertainty. Definition of a robustness parameter

The method of partial order ranking has been used within the environmental area for a variety of purposes as an attractive way of handling complex information. However, the environmental data are often associated with a significant degree of uncertainty. In this investigation the general nature of the influence from data uncertainty on the partial order ranking is analyzed. A Monte Carlo type analysis is performed in which a series of randomly formed data are used to test the influence of data uncertainty. The partial order ranking is interpreted, where the results are transferred to a one-dimensional ranking scale taking into account that not all elements are ranked with the same certainty. A simple general robustness parameter (E) in form of the expected number of comparisons for each ranking element is defined and correlated to the uncertainty analysis results. A simple equation relates E to the number of elements and the number of parameters, respectively. The magnitude of the ranking uncertainty is shown to increase rapidly when the E value decreases below 4-5 comparisons per element. When the E value exceeds 5 the ranking uncertainty becomes nearly constant and independent on the actual E value.     

Soil organic matter mobilization by root exudates

In order to study the different soil organic matter mobilisation by agrarian (Zea mais: cultivars Paolo and Sandek) and forest (Picea abies Karst. and Pinus sylvestris L.) root exudates, three different soils (Dystric Spodic Cambisol--S1, Haplic Luvisol--S2 and Calcaric Cambisol--S3) have been considered. Treating the soils with water (control) or plant root exudates, soil organic matter extracts were obtained. The extracts were characterised by hormone-like activities and gas chromatographic/mass spectrometric (GC/MS) measurements. Water extract and plant root exudates exhibited no hormone-like activity, while the other soil-extracts were endowed with a different hormone-like behaviour. GC/MS data indicated that in the acid soils (S1) Sandek and Picea abies exudates showed a greater ability in extracting organic acid isomers (Cl4COOH, Cl5COOH and Cl7COOH), while in neutral soils (S3) all the exudates were active in separating organic acids. In intermediate conditions (S2), Picea abies and Pinus sylvestris exudates liberated C15COOH isomers, Paolo C11COOH isomers, while Sandek was not effective. The different role of plant root exudates in mobilising bio-molecules from the bulk of the soil is proposed.     

Potential antitermite compounds from Juniperus procera extracts

Thin layer chromatography (TLC) analysis revealed that destructive distillation of Juniperus procera tree gave ten major components, whereas Croton megalocarpus tree yielded five components. This was confirmed by gas chromatography (GC). The components were isolated by column chromatography and analysed using infrared, ultra-violet, visible and mass spectroscopy (MS) techniques. The whole extract was about 30.3% of the starting material (sawdust) and consisted of 77.5% water and 22.5% oily reddish-brown layer. The extracts had alcoholic and phenolic compounds together with acids. Cedrol, a tertiary tricyclic alcohol, was found to be in the greatest proportion in the oily layer. IR spectra with a peak beyond 3000 cm(-1), UV-VIS absorption maxima at 230 nm and mass spectra with m/e 204 suggested the presence of cedrene in the extract.     

Estimating separately personal exposure to ambient and nonambient particulate matter for epidemiology and risk assessment: why and how

This paper discusses the legal and scientific reasons for separating personal exposure to PM into ambient and nonambient components. It then demonstrates by several examples how well-established models and data typically obtained in exposure field studies can be used to estimate both individual and community average exposure to ambient-generated PM (ambient PM outdoors plus ambient PM that has infiltrated indoors), indoor-generated PM, and personal activity PM. Ambient concentrations are not highly correlated with personal exposure to nonambient PM or total PM but are highly correlated with personal exposure to ambient-generated PM. Therefore, ambient concentrations may be used in epidemiology as an appropriate surrogate for personal exposure to ambient-generated PM. Suggestions are offered as to how exposure to ambient-generated PM may be obtained and used in epidemiology and risk assessment.     

Development of a sample equilibration system for the TEOM continuous PM monitor

In recent years, scientific discussion has included the influence of thermodynamic conditions (e.g., temperature, relative humidity, and filter face velocity) on PM retention efficiency of filter-based samplers and monitors. Method-associated thermodynamic conditions can, in some instances, dramatically influence the presence of particle-bound water and other light-molecular-weight chemical components such as particulate nitrates and certain organic compounds. The measurement of fine particle mass presents a new challenge for all PM measurement methods, since a relatively greater fraction of the mass is semi-volatile. The tapered element oscillating microbalance (TEOM) continuous PM monitor is a U.S. Environmental Protection Agency (EPA) PM10 equivalent method (EQPM-1090079). Several hundred of these monitors are deployed throughout the United States. The TEOM monitor has the unique characteristic of providing direct PM mass measurement without the calibration uncertainty inherent in mass surrogate methods. In addition, it provides high-precision, near-real-time continuous data automatically. Much attention has been given to semi-volatile species retention of the TEOM method.     

Heavy metals in urban soils of East St. Louis, IL. Part II: Leaching characteristics and modeling

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produced organic and inorganic chemicals, and petroleum refineries. Following a gross assessment of heavy metals in the community soils (see Part I of this two-part series), leaching tests were performed on specific soils to elucidate heavy metal-associated mineral fractions and general leachability. Leaching experiments, including the Toxicity Characteristic Leaching Procedure (TLCP) and column tests, and sequential extractions, illustrated the low leachability of metals in East St. Louis soils. The column leachate results were modeled using a formulation developed for fly ash leaching. The importance of instantaneous dissolution was evident from the model. By incorporating desorption/adsorption terms into the source term, the model was adapted very well to the time-dependent heavy metal leachate concentrations. The results demonstrate the utility of a simple model to describe heavy metal leaching from contaminated soils.     

Comparison of particulate mass, chemical species for urban, suburban and rural areas in central Taiwan, Taichung

Aerosol samples for PM2.5, PM(2.5-10) and TSP were collected from June to September 1998 and from February to March 1999 in central Taiwan. Ion chromatography was used to analyze the acidic anions: sulfate, nitrate and chloride in the Universal samples. The ratios of fine particle concentrations to coarse particle concentrations displayed that the fine particle concentrations are almost greater than that of coarse particle concentrations in Taichung area. The average concentrations of PM2.5, PM(2.5-10) and TSP in urban sites are higher than in suburban and rural sites at both daytime and night-time. Chloride dominated in the coarse mode in daytime and in fine mode in night-time. Nitrate can be found in both the coarse and fine modes. Sulfate dominated in fine mode in both daytime and night-time.     

The photocatalytic disinfection of urban waste waters

In this paper we present the results of the photocatalytic disinfection of urban waste water. Two microbial groups, total coliforms and Streptococcus faecalis, have been used as indexes to test disinfection efficiencies. Different experimental parameters have been checked, such as the effect of TiO2, solar or UV-lamp light and pH. Disinfection of water samples has been achieved employing both UV-lamp and solar light in agreement with data shown by other authors. The higher disinfection rates obtained employing an UV-lamp may be explained by the stronger incident light intensity. Nevertheless no consistent differences have been found between TiO2-photocatalysis and direct solar or UV-lamp light irradiation at natural sample pH (7.8). At pH 5 the presence of TiO2 increases the relative inactivation rate compared with the absence of the catalyst. After the photocatalytic bacterial inactivation, the later bacterial reappearance was checked for total coliforms at natural pH and pH 5, with and without TiO2. Two h after the photocatalytic treatment, CFU increment was almost nill. But 24 and 48 h later an important bacterial CFU increment was observed. This CFU increment is slower after irradiation with TiO2 at pH 5 in non-air-purged samples.