Methods for collecting time/activity pattern information related to exposure to combustion products

Focus groups, surveys and questionnaires, diaries and observations can be used to gather information about people's exposure to a wide range of combustion products. Information about locations and durations of exposure, and sources of exposure can be obtained with these instruments. The types of instruments used must be fine tuned to meet the design characteristics of the community in which the study will be conducted.     

Effect of pH on phosphine production and the fate of phosphorus during anaerobic process with granular sludge

The effect of pH on phosphine formation during anaerobic cultivation of granular sludge was investigated. The sludge was taken from full-scale anaerobic reactors treating brewery wastewater. Acetate and phosphate were used as the carbon source and phosphorus source respectively. After 10 days cultivation in the dark, results showed that acidic conditions were more favorable for free phosphine production. At pH 5, the optimum concentration 86.42 ng PH3 m-3 of free phosphine was obtained. The level at pH 7 was reduced to 18.53 ng PH3 m-3, about 1/5 of the maximum. The maximum concentration of matrix-bound phosphine of 3.30 ng PH3 kg-1 wet sludge was achieved at pH 6. More than 83% of the total phosphine was matrix-bound phosphine, which accounted for 0.003-0.009 per thousand of the phosphate removal, while free phosphine comprised 0.00002-0.001 per thousand of the phosphate removal. Most of the phosphorus removal from solution was turned into chemical precipitation or was adsorbed by sludge. The mechanism of the phosphate reduction-step in the formation of phosphine production is still unknown. The promotion of phosphine formation by low pH is compatible with an acidic bio-corrosion mechanism of metal particles in the sludge or of metal phosphides which form phosphine at low pH.     

Size distribution of airborne particulate matter and associated heavy metals in the roadside environment

The size distributions of airborne particulate matter (PM) and associated heavy metals Pb, Cd, Ni, Cr, V, Mn, Cu and Fe in different inhalable fractions (< 0.8 microm, 0.8-1.3 microm, 1.3-2.7 microm, 2.7-6.7 microm and > 6.7 microm) were determined at a traffic-orientated urban site in the city of Thessaloniki, northern Greece. The airborne PM displayed a bimodal distribution with most of the mass (52%) contained in the submicron size range (< 0.8 microm) and an additional minor mode (20%) in the coarse size fraction (> 6.7 microm). Characteristic size distributions of heavy metals allowed identification of three main behavioral types: (a) metals whose mass was resided mainly within the accumulation mode (Pb,Cd), (b) those which were distributed between fine, intermediate and coarse modes (Ni,Cu,Mn), and (c) those which were mainly found within particles larger than 2.7 microm in diameter (Fe). The mean mass median aerodynamic diameter (MMAD) of PM was found at 0.85+/-0.71 microm, while the mean MMADs of heavy metals followed the order Pb (0.96 +/- 0.71 microm) < Cd (1.14 +/- 0.82 microm) < V (1.38 +/- 0.63 microm) < Ni (1.45 +/- 0.88 microm) < Cu (2.04 +/- 0.77 microm) < Mn (2.61 +/- 1.23 microm) < Cr (2.91 +/- 1.40 microm) < Fe (3.82 +/- 0.88 microm). The measured distributions are believed to result from a combination of processes including local anthropogenic and natural sources, such as traffic, industrial emissions and resuspension of road dust.     

Atmospheric trace metal pollution in the Naples urban area based on results from moss and lichen bags

The results of trace element content analysed in Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in 1999 are reconsidered to evaluate the reliability of moss and lichen transplants to detect urban trace element atmospheric pollution, using Naples as a case example. After 4 months' exposure, trace element concentrations were at least twice as high as the pre-exposure values and in general higher in Sphagnum than in Pseudevernia. Moss samples were enriched in the following order: As=Cu>Mo>Pb>V>Co>Cr>Zn; lichen samples in the order: Mo>Cu>As=Co=Ni>V>Pb. Based on the calculation of a cumulative load factor, all sites located along the coast had higher trace element loads compared to sites in the hilly inland area. Complementary SEM, TEM and EDS observations showed, despite significant damage to tissue and cell integrity, the recurrent presence of particulate matter in moss and lichen, indicating the considerable presence of dust in the urban atmosphere which, according to chemical composition, may be due both to anthropogenic and natural sources such as volcanic rock and soil and sea salts.     

Gas-particle partitioning of PCDD/Fs in Nagoya urban air, Japan

Polychlorinated dibenzo-p-dioxins and -furans (PCDD/Fs) in the atmosphere were sampled by a high-volume filter/sorbent air sampler at an urban (Nagoya, Japan) site from May 2000 to January 2001 under the average ambient temperatures ranging from 1 degrees C to 33 degrees C. The gas and particle phase concentrations of PCDD/Fs were measured and then the field gas-particle partitioning data were used to assess the Junge-Pankow adsorption model and the K(OA) absorption model. For both PCDDs and PCDFs, passable agreement was obtained between the measured and predicted particulate-band fraction (phi) values by the Junge-Pankow model, but the model tends to overpredict phi for all individual Cl4-8DD/F congeners, especially for the lower chlorinated congeners. On the other hand, good agreement was obtained between the measured and predicted log K(p) values by the K(OA) model for both PCDDs and PCDFs. However, the K(OA) absorption model did not fit the field data at low ambient temperature below 5 degrees C. The disagreement at low ambient temperatures was estimated to arise from the gas adsorption artifacts during the sampling. From the validation by the field measurement data in Nagoya urban air, it is found that the K(OA) absorption model is capable of predicting more accurately gas-particle partitioning of PCDD/Fs than the Junge-Pankow adsorption model.     

Monitoring and toxicity of sulfonated derivatives of benzene and naphthalene in municipal sewage treatment plants

Monitoring benzenesulfonates (BS) and naphthalenesulfonates (NS) took place in five municipal sewage treatment plants (STP). A previously optimized method based on solid phase extraction with polymeric cartridges followed by ion-pair liquid chromatography-electrospray-mass spectrometry (SPE-IPC-ESI-MS) was used. This work confirmed the little or no effect of primary settlement on total organic carbon (TOC) and monosulfonated compounds removal, whereas the main reduction is obtained at the biological stage. However, the most polar compounds, such as naphthalenedisulfonates (NDS), were not effectively removed using the biological treatment. An aromatic sulfonated compound is suggested to be used as a tracer of the origin of industrial pollutants discharged into STPs. A bioluminescence inhibition test, Microtox assay, allowed toxicity determination of the most relevant aromatic sulfonated compounds detected and toxicity comparison between primary and secondary effluents.     

Are N and S deposition altering the mineral composition of Norway spruce and Scots pine needles in Finland?

Data from a large-scale foliar survey were used to calculate the extent to which N and S deposition determined the mineral composition of Scots pine and Norway spruce needles in Finland. Foliar data were available from 367 needle samples collected on 36 plots sampled almost annually between 1987 and 2000. A literature study of controlled experiments revealed that acidifying deposition mediates increasing N and S concentrations, and decreasing Mg:N and Ca:Al ratios in the needles. When this fingerprint for N and S elevated deposition on tree foliage was observed simultaneously with increased N and S inputs, it was considered sufficient evidence for assuming that acidifying deposition had altered the mineral composition of tree needles on that plot in the given year. Evidence for deposition-induced changes in the mineral composition of tree foliage was calculated on the basis of a simple frequency model. In the late eighties the evidence was found on 43% of the Norway spruce and 27% of Scots pine plots. The proportion of changed needle mineral composition decreased to below 8% for both species in the late nineties.     

Modelling PAHs adsorption and sequestration in freshwater and marine sediments

Chemical sequestration is a natural process taking place in sediments and soils which reduces the availability of hydrophobic compounds such as polycyclic aromatic hydrocarbons (PAHs). The rate of sequestration following the release of PAHs into the aquatic environment is still unexplored. To measure kinetic parameters and investigate governing factors of adsorption and sequestration of individual PAHs, natural sediment slurries were spiked with [2H]-PAHs and periodically extracted with a high molecular weight surfactant solution to determine changes in the available fraction over periods of 7-28 days. Dissolved and/or colloidal [2H]-PAHs were first adsorbed on particles within 4-7 days. Adsorbed molecules became slowly sequestered into sediment particles and were gradually more difficult to extract over a period of 17-20 days. An empirical model based on a three-compartment dynamic system was developed to quantify the sequestration rate constants of a group of seven selected PAHs. The sequestration process was assumed to be a first-order consecutive and irreversible two-stage reaction. The model was tested with lowly contaminated marine sediment and moderately contaminated freshwater sediment. Adsorption rate constants ranged between 0.056 h(-1) and 0.017 h(-1) and were approximately ten times higher than sequestration rate constants. Light PAHs were faster to enter into the sequestration process whereas colloidal dispersion of heavier less soluble PAHs reduced their adsorption rates. Although quite simple, this model was efficient to compute kinetic parameters for most PAHs studied and predict that only a small proportion of adsorbed PAHs would remain extractable after one month.     

Organochlorine residues in odontocete species from the southeast coast of India

Blubber from bottle-nose dolphins, spinner dolphins, humpback dolphin (Tursiops truncatus, Stenella longirostris and Sousa chinensis) were collected from the Bay of Bengal (southeast coast of India) and analyzed for the organochlorine pesticides hexachlorocyclohexane (HCHs), p,p'-dichlorodiphenyl trichloroethane (DDTs), and polychlorinated biphenyls (PCBs). All nine specimens analyzed contained considerable levels of all the three chemical classes where DDT was in the range of 3330-23330 ng/g; HCHs in the range of 95-765 ng/g; and PCBs in the range of 210-1220 ng/g (wet weight basis). The reasons for this and the variations in the isomer pattern of HCHs and DDT and its metabolites in marine mammal tissues are discussed.     

Halogenated compounds in a dated sediment core of the Teltow Canal, Berlin: time related sediment contamination

To study the recent contamination history of DDT (1,1,1-trichloro-2,2-bis(chlorophenyl)ethane) and its metabolites, as well as methoxychlor (1,1,1-trichloro-2,2-bis(p-methoxyphenyl)ethane), chlorfenson (4-chlorophenyl-p-chlorobenzenesulfonate), and further halogenated aromatics, a sediment core was collected from the Teltow Canal in Berlin (Germany). The sampling site is located nearby a former industrial point source, where recently analyses on pre-samples have indicated high concentrations of halogenated organic compounds. The deposition time of the investigated sediments was determined by gamma-spectrometrical dating. Pollution trends of selected contaminants were attributed to a time period between 5 and 10 years. Concentration profiles reflect not only the recent pollution history of these compounds, but also the time-depending effects of the ban, restriction and termination of DDT-production in the German Democratic Republic (GDR). DDT and other chlorinated aromatic compounds were produced onsite until the late 1980s. Maximum values of 133 mg kg(-1) (dry weight) for p,p'-DDD (1,1-dichloro-2,2-bis(chlorophenyl)ethane) and approximately 100 mg kg(-1) (dry weight) for p,p'-DDMS (1-chloro-2,2-bis(chlorophenyl)ethane), main metabolites of the anaerobic degradation of DDT, were determined. The occurrence of all selected contaminants, most of which have been banned more than 10 years ago, demonstrate recent contamination pathways, and the necessity of a continuous long-term monitoring of the affected environment.