Comparative study of the suitability of three lichen species to trace-element air monitoring

To investigate the suitability of three lichen species (Cetraria islandica, Evernia prunastri, and Ramalina farinacea) as transplants to trace-element air biomonitoring, they were exposed on substratum-free supports, from July 1996 until July 1997, in three European countries with different climates (Germany, Italy, Romania), at six sites with different types of air pollutants (two in each country). After 2, 4, 6, and 12 months of exposure, some portions of thallus were collected, prepared, and measured by instrumental neutron activation analysis (INAA) at the Institute of Physics and Nuclear Engineering in Bucharest and by energy dispersive X-ray fluorescence analysis (EDXRFA) at the University of Hohenheim in Stuttgart. Fifteen environmentally relevant elements: As, Br, Ca, Co, Cr, Cu, Fe, K, Mn, Ni, Pb, S, Sb, V, and Zn were determined. The analytical results were compared statistically. To study the distribution of the trace-elements between the lichens and the lichen throughfall water inside a virtual column, the throughfall water was collected under the lichen transplants during 6 and 12 months. The dried residues were analysed by INAA at Bucharest. The accumulating capacity for all investigated species is evident. For a comparative evaluation, the initial element contents, the "accumulation factors" relative to the bulk deposition, the interspecies "calibration factors", and the "retention efficiencies", defined as ratios of the lichen enrichment to the sum of this enrichment and the content in the lichen throughfall water, were considered. These criteria attest the best suitability for Evernia prunastri, followed by Ramalina farinacea and Cetraria islandica.     

Transfer of the fungicide vinclozolin from treated to untreated plants via volatilization

Head lettuce plantlets (Lactuca sativa L. var. capitata) were potted, treated with vinclozolin at the six-leaf stage according to application standards and allowed to dry for 24 h. The potted plantlets were then placed in either growth chambers with controlled temperature (20 and 25 degrees C, respectively) or in a greenhouse (approximately 12 degrees C), together with untreated spinach (Spinacia oleracea L.) and standardized grass cultures (Lolium multiflorum Lam. ssp.) While the treated lettuce pots remained in the respective growing compartments until the end of the experiments, spinach and grass were exposed to the compartment air for 24 h and their shoot material was analyzed for vinclozolin by GC-ECD and GC-high resolution mass spectrometry. Exposure and analysis of untreated spinach and grass were carried out at two- or three-day intervals during the course of the experiments. Also, air samples were taken from the compartments at intervals and analyzed for vinclozolin. Maximum vinclozolin concentration in the growth chamber air was about 330 ng m(-3) while vinclozolin contamination of the untreated plants ranged from 50 to 200 microg kg(-1) FW (fresh weight). In the greenhouse atmospheric vinclozolin concentration reached approximately 15 ngm(-3) and maximum contamination of spinach and grass were 30-40 microg kg(-1) FW. Our data clearly show that unintended contamination of plants growing in the vicinity of vinclozolin-treated plants can occur even if the fungicide layer is completely dry. Implications for safety testing and food plants are discussed.     

Photocatalytic oxidation of volatile organic compounds using fluorescent visible light

Photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a highly attractive alternative technology for purification and deodorization of indoor air. The main objectives of this study were to demonstrate that a common fluorescent visible light (FVL) lamp can be used to effectively remove by PCO low concentrations of VOCs from slightly contaminated air and to provide some fundamental and technical details on the process. The target VOC was n-butanol, which is a standard reference odorant. Its PCO was studied under a long residence time in a 3.7-L cylindrical reactor with commercial titanium dioxide (TiO2) as the reference photocatalyst and using mostly FVL for illumination. For comparison only, a UV (black) light lamp was used. The gas-phase products were detected and quantified online by gas chromatography (GC). The effects of reactor residence time, of inlet concentration, and of the relative light intensity on the efficiency of the process were also evaluated. At a high n-butanol concentration (0.1 vol %), butanal and propanal were identified as the intermediate products of the process; ethanal appeared when the initial concentration was < or = 850 ppm(v). This indicates that PCO leading to CO2 and H2O is relatively slow and proceeds in a stepwise manner. Although the efficiency of the process with an FVL lamp was significantly lower than when using a UV black light, complete PCO of low concentrations was achieved for 100 ppm(v). In a search for a material with photoactivation extended to higher wavelengths or increased photoactivity, several samples of transition metal- or silver ion-doped (2 atomic %) TiO2 as well as SrTi(1-x-)Fe(x)O3 (x = 0.1 and 0.15) perovskites were included in the study. None of these materials was more active than pure TiO2. The results of this study open new horizons in the area of in door air quality (IAQ) control.     

CDNA microarray assessment for ozone-stressed Arabidopsis thaliana

Various detrimental factors in the environment damage plants, resulting in growth inhibition or withering. However, it is not easy to identify causal factors by visually inspecting the damaged plants. Therefore, we have developed a sensitive and reliable method for plant diagnosis, based on measuring changes in expression of a set of genes in a DNA microarray. With this method, we have been able to detect and discriminate between plants stressed by ozone, drought, or wounding.     

Summer-time distribution of air pollutants in Sequoia National Park, California

Concentrations of air pollutants were monitored during the May November 1999 period on a network of forested sites in Sequoia National Park, California. Measurements were conducted with: (1) active monitors for nitric oxide (NO), nitrogen dioxide (NO2) and ozone (O3); (2) honeycomb denuder/filter pack systems for nitric acid vapor (HNO3), nitrous acid vapor (HNO2), ammonia (NH3), sulfur dioxide (SO2), particulate nitrate (NO3-), ammonium (NH4+), and sulfate (SO4(2-)); and (3) passive samplers for O3, HNO3 and NO2. Elevated concentrations of O3 (seasonal means 41-71 ppb), HNO3 (seasonal means 0.4-2.9 microg/m3), NH3 (seasonal means 1.6-4.5 microg/m3), NO3 (1.1-2.0 microg/m3) and NH4+ (1.0-1.9 microg/m3) were determined. Concentrations of other pollutants were low. With increasing elevation and distance from the pollution source area of O3, NH3 and HNO3 concentrations decreased. Ammonia and NH4+ were dominant N pollutants indicating strong influence of agricultural emissions on forests and other ecosystems of the Sequoia National Park.     

Comparison between fractionation and bioavailability of trace elements in rhizosphere and bulk soils

Rhizosphere is a microbiosphere and has quite different chemical, physical and biological properties from bulk soils. A greenhouse experiment was performed to compare the difference of fractionation and bioavailability of trace elements Cr, Ni, Zn, Cu, Pb and Cd between rhizosphere soil and bulk soil. In the meantime, the influence of air-drying on the fractionation and bioavailability was also investigated by using wet soil sample as a control. Soils in a homemade rhizobox were divided into four zones: rhizosphere, near rhizosphere, near bulk soil and bulk soil zones, which was designated as S1, S2, S3 and S4. Elemental speciations were fractionated to water soluble, exchangeable and carbonate bound (B1), Fe-Mn oxide bound (B2), and organic and sulfide bound (B3) by a sequential extraction procedure. Speciation differences were observed for elements Cr, Ni, Zn, Cu, Pb and Cd between the rhizosphere and bulk soils, and between the air-dried and wet soils as well. The concentrations of all six heavy metals in fraction B1 followed the order of S2 > S3 > S1 > S4 and for B2, the order was S2 > S3 S4 > S1. For B3, the order was S1 > S3 S4 > S2, while for Cd the order was S2 > S3 approximately/= S4 > S1. The air-drying increased elemental concentration in fractions B1 and B2 by 20-50% and decreased in fraction B3 by about 20-100%. Correlation analysis also indicated that the bioavailability correlation coefficient of fraction B1 in rhizosphere wet soil to plants was better than that between either air-dried or nonrhizosphere soils. Therefore, application of rhizosphere wet soils should be recommended in the future study on the speciation analysis of trace elements in soils and bioavailability.     

Quantification of variability and uncertainty in lawn and garden equipment NOx and total hydrocarbon emission factors

Variability refers to real differences in emissions among multiple emission sources at any given time or over time for any individual emission source. Variability in emissions can be attributed to variation in fuel or feedstock composition, ambient temperature, design, maintenance, or operation. Uncertainty refers to lack of knowledge regarding the true value of emissions. Sources of uncertainty include small sample sizes, bias or imprecision in measurements, nonrepresentativeness, or lack of data. Quantitative methods for characterizing both variability and uncertainty are demonstrated and applied to case studies of emission factors for lawn and garden (L&G) equipment engines. Variability was quantified using empirical and parametric distributions. Bootstrap simulation was used to characterize confidence intervals for the fitted distributions. The 95% confidence intervals for the mean grams per brake horsepower/hour (g/hp-hr) emission factors for two-stroke engine total hydrocarbon (THC) and NOx emissions were from -30 to +41% and from -45 to +75%, respectively. The confidence intervals for four-stroke engines were from -33 to +46% for THCs and from -27 to +35% for NOx. These quantitative measures of uncertainty convey information regarding the quality of the emission factors and serve as a basis for calculation of uncertainty in emission inventories (EIs).     

Concentration and size distribution of ultrafine particles near a major highway

Motor vehicle emissions usually constitute the most significant source of ultrafine particles (diameter <0.1 microm) in an urban environment, yet little is known about the concentration and size distribution of ultrafine particles in the vicinity of major highways. In the present study, particle number concentration and size distribution in the size range from 6 to 220 nm were measured by a condensation particle counter (CPC) and a scanning mobility particle sizer (SMPS), respectively. Measurements were taken 30, 60, 90, 150, and 300 m downwind, and 300 m upwind, from Interstate 405 at the Los Angeles National Cemetery. At each sampling location, concentrations of CO, black carbon (BC), and particle mass were also measured by a Dasibi CO monitor, an aethalometer, and a DataRam, respectively. The range of average concentration of CO, BC, total particle number, and mass concentration at 30 m was 1.7-2.2 ppm, 3.4-10.0 microg/m3, 1.3-2.0 x 10(5)/cm3, and 30.2-64.6 microg/m3, respectively. For the conditions of these measurements, relative concentrations of CO, BC, and particle number tracked each other well as distance from the freeway increased. Particle number concentration (6-220 nm) decreased exponentially with downwind distance from the freeway. Data showed that both atmospheric dispersion and coagulation contributed to the rapid decrease in particle number concentration and change in particle size distribution with increasing distance from the freeway. Average traffic flow during the sampling periods was 13,900 vehicles/hr. Ninety-three percent of vehicles were gasoline-powered cars or light trucks. The measured number concentration tracked traffic flow well. Thirty meters downwind from the freeway, three distinct ultrafine modes were observed with geometric mean diameters of 13, 27, and 65 nm. The smallest mode, with a peak concentration of 1.6 x 10(5)/cm3, disappeared at distances greater than 90 m from the freeway. Ultrafine particle number concentration measured 300 m downwind from the freeway was indistinguishable from upwind background concentration. These data may be used to estimate exposure to ultrafine particles in the vicinity of major highways.     

Lead removal from synthetic leachate matrices by a novel ion-exchange material

This paper discusses the application of a novel polyacrylate-based ion-exchange material for the removal of Pb ions from water. Preliminary testing includes the establishment of the operating pH range, capacity information, and the effect of Ca2+ and anions in the matrix. Batch testing with powder indicates slightly different optimal operational conditions from those used for column testing. The ion-exchanger is excellent for removing Pb from aqueous solutions.     

Bioaccumulation of mercury in a vestimentiferan worm living in Kagoshima Bay,Japan

The present study reports on the mercury concentrations of the vestimentiferan worm, Lamellibrachia satsuma, (Annelida: Pogonophora) found near hydrothermal vents at a depth of 80-100 m in the northern parts of Kagoshima Bay. The vestimentiferan worms had total mercury concentrations of 238 ng/g in the anterior muscle of the body and 164 ng/g in the posterior trophosome. Methylmercury constituted only 7.6% of total mercury detected anteriorly and 16.3% posteriorly. The mean total mercury concentration in filtrated ambient seawater of the worm habitat was 1.1 ng/l. The worm should accumulate mercury in seawater by a one-step into the anterior and posterior parts as 2.2 x 10(%) and 1.5 x 10(5) times those of the filtered ambient seawater, respectively. The bioaccumulation factor of mercury by the worms with only their respiration would be actually larger than that by other marine animals through food webs. The high bioaccumulation factor of mercury in the worms suggest the following two possibilities: (i) the biological half-life of organomercury in the worm could be exceptionally long; or (ii) the lifetime of vestimentiferan worms examined in the present study could be extremely long. Various metals in one specimen of the worm were analyzed by using ICP-MS, and then gold as well as silver were detected in the worm. Gold was detected for the first time from marine animals.