Benefits of Investing in Ecosystem Restoration

Measures aimed at conservation or restoration of ecosystems are often seen as net‐cost projects by governments and businesses because they are based on incomplete and often faulty cost‐benefit analyses. After screening over 200 studies, we examined the costs (94 studies) and benefits (225 studies) of ecosystem restoration projects that had sufficient reliable data in 9 different biomes ranging from coral reefs to tropical forests. Costs included capital investment and maintenance of the restoration project, and benefits were based on the monetary value of the total bundle of ecosystem services provided by the restored ecosystem. Assuming restoration is always imperfect and benefits attain only 75% of the maximum value of the reference systems over 20 years, we calculated the net present value at the social discount rates of 2% and 8%. We also conducted 2 threshold cum sensitivity analyses. Benefit‐cost ratios ranged from about 0.05:1 (coral reefs and coastal systems, worst‐case scenario) to as much as 35:1 (grasslands, best‐case scenario). Our results provide only partial estimates of benefits at one point in time and reflect the lower limit of the welfare benefits of ecosystem restoration because both scarcity of and demand for ecosystem services is increasing and new benefits of natural ecosystems and biological diversity are being discovered. Nonetheless, when accounting for even the incomplete range of known benefits through the use of static estimates that fail to capture rising values, the majority of the restoration projects we analyzed provided net benefits and should be considered not only as profitable but also as high‐yielding investments. Beneficios de Invertir en la Restauración de Ecosistemas     

成组生物毒性测试法综合评价典型工业废水毒性

为了更加准确地评估典型工业废水的综合生物毒性以及处理工艺对废水毒性的削减情况,采用发光细菌急性毒性实验、大型溞急性毒性实验和单细胞凝胶电泳实验,结合潜在生态毒性效应探测(potential ecotoxic effects probe,PEEP)指数对常州市7种典型工业废水的综合生物毒性进行了评价。结果表明,7种工业原水都表现出了急性毒性或遗传毒性,综合生物毒性强度的排序为电子厂>电镀厂>综合污水处理厂>印染厂>化工厂>食品厂>制药厂。而7种工业废水的处理后出水综合生物毒性强度的排序为印染厂>化工厂>电子厂>综合污水处理厂>食品厂>制药厂>电镀厂。其中,印染和化工厂出水综合生物毒性高于原水,分别增加了43.3%和38.7%,PEEP评价结果显示分别属于剧毒和高毒,而电镀、电子、综合污水处理和食品厂出水的综合生物毒性削减明显,分别比原水削减了76.9%、53.1%、48.3%和26.6%,PEEP结果表明基本无毒。建立在成组生物毒性实验基础上的PEEP评价方法可全面反映工业废水的综合生物毒性,进而更客观地评价废水对水生态系统乃至人类健康的潜在影响。     

Self-contamination of aquaculture cages in shallow water

Fish farms, which initially colonized quiet and protected natural coastal areas, are now frequently installed in open flow zones, due to the lack of space along coasts and to the emergence of new environmental constraints. For the past two decades, a salmon fish farm has been located inside the roadstead of Cherbourg (France) to benefit from both sea protection and tide currents which regularly refresh the water. In spite of these favourable environmental conditions, periods of non-negligible fish mortalities have been observed to occur without clear evidence of their origin. This motivated the turbidity measurements and the numerical simulations presented in this paper. Firstly, it is shown that high turbidities in the farm site under study are mainly due to the flow acceleration under the cages, which causes the re-suspension of sediments and bio-deposits. Secondly, particles which enter the fishnet can have different origins (external source, bottom, or the net itself). Numerical simulations, based on the Reynolds equations and on the discrete random walk model for particle dispersion, suggest that the rear area of the net can be reached by particles emerging from below the net. It is observed that turbulent dispersion is a key ingredient for such a behaviour, as it can lead particles towards a large recirculation cell behind the net. Dispersion by realistic unsteady vortices has also been analysed by means of a Lattice-Boltzmann model. Though these computations involve smaller Reynolds numbers, they confirm qualitatively the observations of the random walk model. In addition, they suggest that vortex shedding and unsteady recirculation cells near the bottom can force particles from the sand bed to be lifted up and reach the rear of the net.     

APPLICATION OF THE U.S.G.S. DIFFUSION HYDRODYNAMIC MODEL FOR URBAN FLOODPLAIN ANAYSIS1

ABSTRACT: The two-dimensional Diffusion Hydrodynamic Model, DHM, is applied to the evaluation of floodplain depths resulting from an overflow of a leveed river. The environmental concerns of flood protection and high flow velocities can be better studied with the help of the two-dimensional DHM flow model than by use of the one-dimensional modeling techniques. In the test case, some of the predicted flood depth differences between the DHM and the one-dimensional approach (i.e., HEC-2) are found to be significant. Although the DHM generates considerable information, it is easy to use and does not require expertise beyond that required for use of the one-dimensional approaches.     

Naval derusting wastewater containing high concentration of iron, treated in UV photo-Fenton-like oxidation

The UV photooxidation with Fe(III) and H2O2 was employed to treat a naval derusting wastewater, which contains the high COD (chemical oxygen demand) and various metal concentrations exceptionally with high concentrations of citric acid and iron. Because of its iron containment, the Fenton-like reaction automatically took place with the added amount of H2O2. The decomposition rate was found in a sequence of: UV/H2O2/Fe(III) > UV/H2O2 > Fe(II)/H2O2. Two H2O2 injection methods, single and multiple points, were evaluated. The multiple-point H2O2 injection was more e cient to decompose the citric acid. The decomposition of the synthetic citric acid and the real derusting citric acid wastewater was also compared. The 93% COD reduction of the derusting wastewater was achieved using the UV/H2O2/Fe(III) treatment.     

Regional Blue and Green Water Balances and Use by Selected Crops in the U.S.

The availability of freshwater is a prerequisite for municipal development and agricultural production, especially in the arid and semiarid portions of the western United States (U.S.). Agriculture is the leading user of water in the U.S. Agricultural water use can be partitioned into green (derived from rainfall) and blue water (irrigation). Blue water can be further subdivided by source. In this research, we develop a hydrologic balance by 8‐Digit Hydrologic Unit Code using a combination of Soil and Water Assessment Tool simulations and available human water use estimates. These data are used to partition agricultural groundwater usage by sustainability and surface water usage by local source or importation. These predictions coupled with reported agricultural yield data are used to predict the virtual water contained in each ton of corn, wheat, sorghum, and soybeans produced and its source. We estimate that these four crops consume 480 km³ of green water annually and 23 km³ of blue water, 12 km³ of which is from groundwater withdrawal. Regional trends in blue water use from groundwater depletion highlight heavy usage in the High Plains, and small pockets throughout the western U.S. This information is presented to inform water resources debate by estimating the cost of agricultural production in terms of water regionally. This research illustrates the variable water content of the crops we consume and export, and the source of that water.     

Evaluation of Dynamically Dimensioned Search Algorithm for Optimizing SWAT by Altering Sampling Distributions and Searching Range

The primary advantage of Dynamically Dimensioned Search (DDS) algorithm is that it outperforms other optimization techniques in both convergence speed and searching ability for parameter sets that satisfy statistical guidelines while requiring only one algorithm parameter (perturbation factor) in the optimization process. Conventionally, a default value of 0.2 is used as the perturbation factor, where a normal distribution is applied with mean sampling distribution of zero and variance of one. However, the perturbation factor sensitivity to the performance of DDS for watershed modeling is still unknown. The fixed‐form sampling distribution may result in finding parameters at the local scale rather than global in the sampling space. In this study, the efficiency of DDS was evaluated by altering the perturbation factor (from 0.05 to 1.00) and the selection of sampling distribution (normal and uniform) on hydrologic and water quality predictions in a lowland agricultural watershed in Texas, United States. Results show that the use of altered perturbation factor may cause variations in convergence speed or the ability to find better solutions. In addition, DDS results were found to be very sensitive to sampling distribution selections, where DDS‐N (normal distribution) outperformed DDS‐U (uniform distribution) in all case scenarios. The choice of sampling distributions could be the potential major factor to be attributed for the performance of auto‐calibration techniques for watershed simulation models.     

Feasibility study on cross-linked biopolymeric concrete encapsulating selenium glass wastes

Feasibility study was conducted to encapsulate the selenium (Se) contained in glass waste, using the biopolymer-modified concrete. Biopolymer has unique characteristics to provide the chemical sites to metals or toxic compounds through the three-dimensional cross-linked structure. Very minute amount of biopolymer enhanced the characteristics of cementitious material. The resulting biopolymeric composite with selenium glass waste showed 20% higher compressive strength than ordinary concrete and the lower leaching concentration than the equipment detection limit. For a qualitative measurement, X-ray diffraction (XRD; X-ray powder diffractogram) was used to characterize the biopolymeric concrete. The optimum waste content percentage with appropriate biopolymer concrete mixture ratio was identified for its possible commercial use.     

Influence of Substrate on Bioaccumulation of 14C-Paraquat in Compost Worms Eisenia foetida

Contamination of soil with pesticides can be evaluated using toxicity tests with worms because their ecological niche makes them good bioindicators. Bioaccumulation in compost worms of [methyl- ¹⁴C] paraquat (1,1′-dimethyl-4,4′-bipyridinium dichloride) was measured after three-month exposure in two substrates with differing physicochemical characteristics, in particular their organic matter and clay contents. The treatments were 1.2, 12, and 120 μg paraquat g^?1 substrate. The action of the worms did not influence the loss of ¹⁴C from the substrates, as the ¹⁴C-recovered was essentially quantitative at the end of the study in both the presence and absence of the worms. The organic matter and clay contents of the substrates determined the extent of the paraquat uptake by the worms; worms from the substrate with smaller amounts of clay and organic matter had the higher values of the bioconcentration factor (BCF), these being about 5 (fresh-weight basis) and independent of the application rate. The BCF values in the substrate containing more organic matter and clay were smaller but increased from 1.1 to 3.8 with the increasing rates of application. However, in both substrates the amounts of paraquat bioaccumulated in the worms was always less than 1% of that applied, indicating the very strong binding of paraquat to the substrates and hence low availability to the worms.     

Effects of fungicides triadimefon and propiconazole on soil bacterial communities

The impact of fungicides triadimefon and propiconazole on soil bacterial populations from a strawberry field was investigated. Two fungicides were applied to the soil at concentrations of 10 mg/kg or 100 mg/kg with soil water contents 20.2% (fresh soil water content) or 26.0% (field capacity). Changes in bacterial communities were assessed using DNA extraction, polymerase chain reaction (PCR) amplification of the 16S rDNA and denaturing gradient gel electrophoresis (DGGE). High performance liquid chromatography (HPLC) was utilized to detect the residue of fungicides in soils. The results showed that propiconazole was more persistent than triadimefon in soils, and the two soil water contents did not cause significant differences in dissipation rates between the two fungicides. A high concentration of propiconazole could inhibit the existence of soil microbes while one of triadimefon might induce the microbial population in the first stage. From unweighted pair-group method using arithmetic averages (UPGMA) dendrograms, the effect of triadimefon and propiconazole at the two applied concentrations on a soil bacterial community could be long term. After triadimefon was applied for 60 days and propiconazole for 75 days, the compositions of microbial communities were not recovered. From the viewpoint of environmental protection, it was of significant importance to pay more attention not only to the residues of pesticide but also to the change in soil microbial communities.