西藏自治区措勤县德能铜多金属矿床地质特征及成因分析

通过对西藏自治区措勤县德能铜多金属矿的研究发现,矿区内共6条达到工业品位的铜矿体,并伴生有铅、锌、金、银等多种有益组分,成矿地质条件较好。矿体主要赋存于燕山期石英闪长玢岩岩体外接触带及构造破碎带中,其中Cu4矿体规模最大,经深部钻孔工程及地表槽探验证,矿体品位和厚度沿走向和倾向变化系数较小。燕山晚期第一阶段第一次石英闪长玢岩侵入体是主要成矿物质来源,后期北西西向断裂构造是主要导矿和容矿构造。     

华南沿海某大气背景点黑碳气溶胶污染特征

黑碳气溶胶(BC)因其显著的气候效应和对人类健康的危害而成为研究的热点。研究背景点位BC的浓度水平和来源特征有助于掌握BC在区域尺度上的辐射强迫特性和环境影响。2009年秋季在华南沿海某区域大气背景点进行了为期约40 d的BC在线观测。观测期间BC的平均浓度为(2.34±1.33)μg/m3,与其它区域背景点相比处于较高水平。利用中尺度天气研究和预报系统WRF模拟的高分辨率三维气象场数据驱动HYSPLIT-4反向轨迹模式,模拟观测期间每小时的气团轨迹,将所有轨迹分为来源特征明显的东北沿海、北方内陆、香港方向和东南海面方向四类。当受到东北沿海来源气团影响时,BC的浓度为平均水平的1.4倍,BC和CO有较好的线性相关关系,而其它三类气团影响时的BC浓度都低于平均浓度,且BC和CO的相关关系很差,说明来自东北沿海地区的较近距离区域传输是影响该背景点大气BC的主要源区。     

ASTAR IR-200红外三波数测油仪自校方法

针对ASTAR IR-200红外三波数测油仪,提出仪器的自校方法。     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Building regional priorities in forests for development and adaptation to climate change in the Congo Basin

Indentifying common priorities in shared natural resource systems constitutes an important platform for implementing adaptation and a major step in sharing a common responsibility in addressing climate change. Predominated by discourses on REDD + (Reduced Emissions from Deforestation and Forest Degradation and conservation, sustainable management of forests and enhancement of forest carbon stocks in developing countries) with little emphasis on adaptation there is a risk of lack of policy measures in addressing climate change in the Congo Basin. Forest products and ecosystem services provide security portfolios for the predominantly rural communities, and play major roles in national development programmes in both revenue and employment opportunities. Thus, raising the profile of forests in the policy arena especially in the twin roles of addressing climate change in mitigation and adaptation and achieving resilient development is crucial. Within the framework of the Congo Basin Forests and Climate Change Adaptation project (COFCCA) project, science policy dialogue was conducted to identify and prioritize forest based sectors vulnerable to climate change but important to household livelihoods and national development. The goal of the prioritization process was for the development of intervention in forest as measures for climate change adaptation in Central Africa. Participants constituted a wide range of stakeholders (government, Non Governmental Organizations, research institutions, universities, community leaders, private sectors etc.) as representatives from three countries directly involved in the project: Cameroon, Central African Republic and Democratic Republic of Congo. Building on national priorities, four forest related sectors were identified as common priorities at the regional level for focus on climate change adaptation. These sectors included: (1) energy with emphasis on fuel wood and Charcoal; (2) Water principally quality, quantity, accessibility, etc.; (3) Food with emphasis on Non Timber Forest Products, and (4) Health linked to healthcare products (medicinal plants). Using these prioritized sectors, the project focused on addressing the impacts of climate change on local communities and the development of adaptation strategies in the three pilot countries of the Congo Basin region. The four sectors constitute the key for development in the region and equally considered as priority sectors in the poverty reduction papers. Focused research on these sectors can help to inject the role of forests in national and local development and their potentials contributions to climate change adaptation in national and public discourses. Mainstreaming forest for climate change adaptation into national development planning is the key to improve policy coherence and effectiveness in forest management in the region.     

高径比对猪场废水脱氮与沼气脱硫耦联反应器的影响

采用填料鼓泡塔反应器研究其高径比对猪场废水脱氮与沼气脱硫耦联过程的影响,比较了3种不同高径比(8∶1、3∶1、2∶1)反应器的废水脱氮与沼气脱硫效能.在温度30～32℃、空塔停留时间6.70 min、水力停留时间3.35 d、沼气中H2 S浓度1 414～1 838 mg.m-3、进水NO x--N浓度114～243 mg.L-1的条件下,高径比2∶1反应器的运行较稳定,且处理效果较好,硫化氢去除率平均值为96.7%,NO x--N去除率平均值达到88.7%;而高径比8∶1和3∶1反应器的运行不太稳定,硫化氢去除率的平均值分别为68.0%、80.4%,NO x--N的去除率平均值分别为89.7%、90.2%.主要是因为高径比2∶1反应器的实际气速(3.12×10-2 m.s-1)比高径比3∶1、8∶1反应器的实际气速(分别为3.62×10-2 m.s-1和6.64×10-2 m.s-1)更慢,其气液传质系数(1.79×10-5 s-1)比高径比3∶1、8∶1反应器的气液传质系数(分别为1.64×10-5 s-1和1.55×10-5 s-1)更大,传质效果更好.处理效能试验结果以及反应器流体力学特征参数均表明,高径比2∶1反应器为最适合的反应器.     

Establishment of facultative sexuals

The existence of sex is one of the major unsolved problems in biology. We use computer simulations to model conditions in which sex may first become established. We develop an individual-based population model and show that a hypothetical facultative sex gene can fix, provided that the initial cost is low. It is demonstrated that the equilibrium fitness in the population increases with increasing population size and decreasing mutation rate. The probability of the establishment of the sex gene is found not to be directly related to the fitness difference between the asexual and sexual populations. This change in fitness on changing the parameters of the model is investigated.     

有机化改性海泡石对六六六吸附性能的探讨

分别采用阴阳离子表面活性剂对海泡石进行有机化改性处理,并对改性海泡石进行了吸附六六六实验.结果表明,未经有机化改性的海泡石对六六六各异构体去除能力由小到大依次为:γ-六六六(12.66%)、δ-六六六(12.79%)、α六六六(17.35%)、β-六六六(33.57%).经DOSO3Na有机化改性的海泡石对六六六各异构体的去除能力由小到大依次为:β-六六六、γ δ-六六六、α-六六六.经CTMAB有机化改性的海泡石对六六六各异构体的去除能力由小到大依次为:β-六六六、α-六六六、γ δ-六六六.有机化改性海泡石使体系中β-六六六大幅度增加,可能为有机化海泡石催化α、γ、δ各异构体向β异构体转化.