Individual and combined inhibition of phenol and thiocyanate on microbial activity of partial nitritation

This study evaluated the individual and interactive effect of phenol and thiocyanate (SCN⁻) on partial nitritation (PN) activity using batch test and response surface methodology. The IC₅₀ of phenol and SCN⁻ on PN sludge were 5.6 and 351 mg L⁻¹, respectively. The PN sludge was insensitive to phenol and SCN⁻ at levels lower than 1.77 and 43.3 mg L⁻¹, respectively. A regression model equation was developed and validated to predict the relative specific respiration rate (RSRR) of PN sludge exposed to different phenol and SCN⁻ concentrations. In the range of independent variables, the most severe inhibition was observed with a valley value (17%) for RSRR, when the phenol and SCN⁻ concentrations were 4.08 and 198 mg L⁻¹, respectively. An isobole plot was used to judge the combined toxicity of phenol and SCN⁻, and the joint inhibitory effect was variable depending on the composition and concentration of the toxic components. Furthermore, the toxic compounds showed independent effects, which is the most common type of combined toxicity.

     

Optimum ridge-to-furrow ratio in ridge-furrow mulching systems for improving water conservation in maize (Zea may L.) production

Environmental Science and Pollution Research - Water-saving cultivation techniques have been attracting increased attention worldwide. Ridge-furrow mulching system (RFMS), as a prospective...     

长三角城市群“空间流”网络结构特征——基于公路运输、火车客运及百度指数的综合分析

信息技术的应用与社会信息技术的传输,使大量的要素(人流、物流、信息流)在城市群空间内集聚与扩散,加密城市群空间内城市联系。在基于公路运输、普通列车、高速列车以及百度指数4个要素的综合分析基础上,对长三角城市群"空间流"网络结构特征进行探析。研究结果表明:(1)长三角城市群区域内城市联系虽具备了网络化规模,但城市间的联系不均衡,以上海、南京、杭州等城市为多中心的协调网络发展格局特征明显;(2)长三角城市群16个核心城市"空间流"特征呈现三角形网络结构,其三角形的顶角分别由上海(沪)、南京(宁)与杭州(杭)3个核心节点城市构成。在空间结构内部,形成若干次级城市网络连线;在空间分布上,北翼网络化程度较高于南翼线性联系程度,区域联系强度以"沪—宁"、"沪—杭"沿线向两侧递减;(3)上海、南京、杭州、苏州、无锡5个核心城市排名处于网络中心的前列,扬州、南通、泰州、舟山等周边城市相对靠后,这与区域经济发展过程的"吸虹效应"有关,随着区域经济一体化程度的加深,中心城市会向周边地区提供服务与经济辐射,完善整个长三角城市群网络体系。     

Characterization of hard- and softwood biochars pyrolyzed at high temperature

A wide range of waste biomass/waste wood feedstocks abundantly available at mine sites provide the opportunity to produce biochars for cost-effective improvement of mine tailings and contaminated land at metal mines. In the present study, soft- and hardwood biochars derived from pine and jarrah woods at high temperature (700 °C) were characterized for their physiochemical properties including chemical components, electrical conductivity, pH, zeta potential, cation-exchange capacity (CEC), alkalinity, BET surface area and surface morphology. Evaluating and comparing these characteristics with available data from the literature have affirmed the strong dictation of precursor type on the physiochemical properties of the biochars. The pine and jarrah wood feedstocks are mainly different in their proportions of cellulose, hemicellulose and lignin, resulting in biochars with heterogeneous physiochemical properties. The hardwood jarrah biochar exhibits much higher microporosity, alkalinity and electrostatic capacity than the softwood pine. Correlation analysis and principal component analysis also show a good correlation between CEC–BET–alkalinity, and alkalinity–ash content. These comprehensive characterization and analysis results on biochars’ properties from feedstocks of hardwood (from forest land clearance at mine construction) and waste pine wood (from mining operations) will provide a good guide for tailoring biochar functionalities for remediating metal mine tailings. The relatively inert high-temperature biochars can be stored for a long term at mine closure after decades of operations.     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

西部大开发十五年环境效率评价及其影响因素分析

西部大开发政策实施以来,西部地区实现了快于东部和中部的经济增长。正确认识西部地区经济增长中的环境成本,评价西部地区的环境效率具有重要意义。本文运用考虑非期望产出的超效率SBM模型测算了2000—2014年西部大开发以来的环境效率。研究发现:西部地区环境效率偏低,处于相对无效状态。西部地区环境效率明显低于传统效率,经济增长付出了较高的环境代价。西部大开发以来传统效率与环境效率之间的差距呈现先扩大后缩小的"倒U"型走势变化。西部地区省份环境效率在全国排名靠后,各省份的环境效率呈现出差异化的发展态势,其中重庆和四川排名不断提升,新疆排名逐步回落,内蒙古和广西在西部地区排名相对靠前且比较稳定,云南和陕西一直处于中间水平,贵州、甘肃、青海、宁夏排名相对靠后。西部地区环境效率2000—2003年上升,2004—2010年不断下降,2010—2014年趋于平稳。西部地区环境效率低于东部地区且差距大,也低于中部地区和全国平均水平。通过收敛性检验发现,西部地区各省份间的环境效率差距呈现先缩小后扩大的趋势;西部地区与东部地区间的环境效率差距逐渐扩大,与中部地区间的环境效率差距先扩大后缩小。本文同时采用了Tobit模型进行面板回归,实证分析了西部地区环境效率的影响因素。结果表明:经济发展水平、科学技术水平、能源消费结构、环保投资力度对西部地区环境效率具有显著影响;产业结构变化和对外开放程度对西部地区环境效率影响不显著;西部地区存在环境效率的库兹涅茨曲线。     

东北地区农业现代化与新型城镇化协调发展研究

新型城镇化与农业现代化作为"三化"、"四化"乃至"五化"战略的重要核心内容,研究新型城镇化与农业现代化的协调发展对于开创中国未来城乡经济社会发展一体化的新格局至关重要。以东北三省34个地级城市为研究对象,构建农业现代化与新型城镇化的评价指标体系,结合熵值赋权、变异系数赋权的综合确权法测算城市农业现代化与新型城镇化的发展水平,基于耦合协调度模型探讨二者的耦合度与协调发展度,并划分其阶段类型,研究表明:(1)东北三省新型城镇化的发展水平排序:辽宁省吉林省黑龙江省,农业现代化的发展优势排序:黑龙江省辽宁省吉林省;辽宁与吉林省的新型城镇化发展速度超前于农业现代化,仅黑龙江省的新型城镇化发展滞后于农业现代化;(2)东北三省新型城镇化的高值区分布在以哈尔滨为核心的黑龙江省西南、以长春为核心的吉林省中部、以沈阳和大连为核心的辽宁省中部及南端,农业现代化的高值区分布在哈—大—齐—绥沿线的松嫩平原;沈阳、大连、哈尔滨、长春新型城镇化水平居于东北三省前列,哈尔滨、沈阳、齐齐哈尔、绥化农业现代化水平位于首位;(3)辽宁省新型城镇化与农业现代化的耦合协调发展度均强于黑龙江省,吉林省略低;耦合度高值区位于黑龙江省东北部的三江平原、辽宁省的沿海经济带,协调发展度高值区位于黑龙江省西南部的松嫩平原及以长春、沈阳、大连为核心的小范围圈层区域;仅哈尔滨与沈阳市处于勉强协调阶段,多数城市处于高强度、中高强度拮抗耦合与轻度、中度失调阶段。     

中国FDI环境效应的再检验

改革开放以来,外商直接投资(FDI)的涌入为中国经济发展注入了新活力,并成为中国经济高速增长的重要引擎之一。然而,随着康菲石油渤海漏油事故、江苏启东王子造纸排污和阿玛尼污染投诉等涉外污染事件报道频出,学术界对于FDI涌入可能带来的负面环境效应表现出一定担忧。现有文献多聚焦于整体层面的FDI环境效应检验,而对其区域差异及原因产生机制的系统探究并不多见。为此,本文从理论判断和命题推演出发,利用2003—2014年中国省际面板数据,以改进熵值法拟合环境污染综合指数,并构建普通面板模型,实证检验了FDI流入对中国环境污染的影响及其区域差异。结果表明,总体而言,"污染光环"假说在中国基本成立,即FDI流入在一定程度上改善了中国环境质量,但不同地区FDI的环境效应有所不同,其主要表现为沿海和内陆地区FDI具有显著的"污染光环"效应,且前者强于后者,而沿边地区FDI具有不明显的"污染天堂"效应。在此基础上,构造面板门槛模型,进一步系统考察了FDI对中国环境污染影响的4种主要吸收能力因素的门槛效应。门槛回归结果表明,FDI对中国环境污染的影响显著存在基于经济发展、环境规制、人力资本和金融发展水平的双门槛效应。经济发展、人力资本和金融发展水平越高,FDI的"污染光环"效应越明显,而适度的环境规制才更有利于FDI环境技术溢出的发挥。基于此,本文建议应进一步全方位地提高对外开放水平,一如既往地积极引进并监督FDI;同时地方政府也需认清地区发展的不平衡性,进而采取差异化的引资政策。     

Experimental thermal storage research of organic binary phase change materials in building environment

This paper aims to reveal the heat transfer mechanism of low-temperature phase change material (PCM) and design PCM heat storage device in building heating environment. Firstly, low-temperature binary PCMs of lauric acid and stearic acid are prepared, and their thermal properties are investigated by DSC. Then, shell and tube latent heat thermal energy storage units are conducted, and heat transfer experiments are carried out to analyze the heat transfer mechanism of PCM. The results demonstrate that natural convection plays an important role in heat transfer process, and the heat storage efficiency of PCMs can be significantly enhanced by increasing the fin width and improving the inlet heat transfer fluid (HTF) temperature. Furthermore, some proposals are put forward to guide the design of PCM storage device in building heating environment.     

Hydrothermal liquefaction phase behavior of microalgae & model compounds in fused silica capillary reactor

A fused silica capillary reactor combined with a heating/cooling stage, a microscope and a digital camera were used to investigate phase behavior during the hydrothermal liquefaction of microalgae (Dunaliella tertiolecta) and model compounds, including soya protein and glycine, starch, glucose and xylose, stearic acid and palmitic acid. Bubbles were generated at 246°C and disappeared at 360°C upon heating when Dunaliella tertiolecta used as feedstocks. Moreover, liquid products were generated at 300°C upon heating and oily liquid products began to separate out at 250°C upon cooling. The phase behavior of soya protein was similar to that of the Dunaliella tertiolecta. Meanwhile, there only observed the bubbles generation during hydrothermal liquefaction of glycine. Heating the starch, glucose and xylose above 350°C generated black solids from carbonization. Stearic acid and palmitic acid only had the process of melting, dissolution, dispersion and precipitation.