石灰凝胶阻化剂防灭火技术在高硫矿的应用研究

在分析现有凝胶阻化剂防灭火机理的基础上 ,笔者针对我国高硫煤矿采空区发火特点 ,研制出石灰凝胶阻化剂的配方 ,并对其防灭火机理进行了详细探讨 ,确定了喷洒该种阻化剂的工艺过程及其应注意的问题。根据现场试验的测定数据表明 ,石灰凝胶阻化剂对高硫煤矿的防灭火效果好     

液氯泄漏事故模拟分析

针对1996年1月21日在西班牙发生的一起液氯泄漏事故的后果进行了模拟分析。模拟分析结果同事故实际所造成的后果是一致的。表明采用基于数学模型的事故后果模拟分析具有一定程度的可靠性。对于救灾和对重大危险源编制应急事故预案有一定程度的指导意义。     

大型构件防腐喷砂(涂)车间通风除尘设计

考虑到大型构件喷砂（涂）车间铝粉尘污染的特点以及构件进出空间的限制，比较了各种类型的除尘器，选择了最合理的通风除尘方案，进行了通风除尘系统的设计。该设计方案实施后，除尘效果显著。     

在监测样本信息的基础上确定水环境系统权重的分配方法

权重确定是水环境质量评价中很重要的一个方面，本文在监测样本信息的基础上，利用正交旋转变换方法，提出了一种权重确定方法，并结合实际进行了计算。     

美国环境保护与环境技术产业发展的主要经验和启示

随着经济和社会的发展，保护人类赖以生存的环境，走可持续发展之路，已成为世界范围内人们的共识，环境污染问题已日益成为人们关注的焦点。美国环境保护发展的历史与现状，揭示出一些促进环境保护和环境技术产业发展的经验，值得我们借鉴。     

气浮--厌氧--生物接触氧化工艺处理屠宰废水

介绍了采用气浮-厌氧-生物接触氧化工艺处理屠宰废水的工程实例。当进水CODcr≤4500mg／L时，出水可达到国家《肉类加工工业污染物排放标准》(GB13457—1992)一级标准。     

论国家生态安全

国家生态安全是一种全新的现代国家安全观，要重视和维护国家生态安全。     

污水处理厂自动化监控系统

自动化技术在能源、电力、机械、环境等行业的应用越来越广泛，也促使了自动化水平的不断提高。由于Synall2000强大的网络化功能，为将来系统在子网级和企业级实施基于Synall2000网络化数据监控系统打下了坚实、可靠的基础。在全面实施单个站点自动化监控的基础上，可方便地实现子网级的网络化数据自动采集与监控系统。     

钢厂热锯机噪声控制方案

某钢厂热锯机的工作噪声问题严重影响附近居民的日常生活，急需解决。根据其发声机理，通过采取对圆盘锯边缘开槽，安装吸隔声罩，对锯片增加阻尼材料，夹紧工件等措施取得了较好的降噪效果。     

Numerical Simulation of Synoptic Condition on a Severe Sand Dust Storm

By using observational data and MM5, an observational analysisand numerical study was conducted on the synoptic condition of a severe dust storm that was caused by a Mongolian cyclone whichoccurred from 6 to 8 April 2001. Results illustrated thatthe cyclogenesis was due to the isentropic potential vorticity (IPV) advection in the upper troposphere and the terrain modifiedbaroclinicity in the mid-lower troposphere. The Altai-Sayan complex of mountains blocked the lower level cold air and made the isentropic surface sharply steep. When the air slid down along the isentropic surface the increasing of baroclinicity anddecreasing of stability blew up the vertical vorticity development.The formation of the dust storm was a result of a cyclonic cold front passing across the area. The occurrence of this dust stormwas closely related to the strong surface wind, which was accompanied by a cold front passing, rather than the cyclogenesis, itself. Hence, the reason for the pre-front dust storm formulation was the formation of heating convection. Reasons behind the formation of a black storm (visibilitylower than 50 m), which occurred in the mid-north part ofInner Mongolia, lay in several aspects. Firstly, in thisarea the surface wind was strong, a direct result of thedownward transport in mid-lower troposphere. Secondly,the cold front passed over the effected area near sunsetso the air obtained much more surface heating to form adeeper mixed layer (ML). Thirdly, cooperation between thelower level wind and the terrain made the atmosphere inthis area and acquired the maximum advective contributionnecessary to form a deep post-front ML. The sensitivityexperiment revealed that surface heat flux was important to the frontal lifting. In addition, the forcing of surface heating wasalso seen as the primary forcing mechanism of frontogenesis. Meanwhile, removal of the surface heat flux made the atmosphericstratification became stable and the pre-storm ML very shallow,which weakened the strength of the dust storm.