Identification of Odor Causing Compounds in a Commercial Dairy Farm

The odorous air emissions from confined animal feeding operations (CAFOs), such as swine, poultry and dairy farms, are increasingly raising community complaints. Odorous emissions can result in health damages, psychological discomforts and adverse aesthetic effects in the community. However, these emissions are not well characterized up to now due to the lack of legislation, the limitations in sampling and instrumentation techniques, and the complexity of the emissions themselves. This study is aimed at the development of a high volume sampler and sorbent assembly to identify the odor causing compounds from a diary CAFO. The sorbent was custom designed to target the potential compounds that may exist in a dairy farm and was validated in laboratory with a synthetic odor from the swine manure. The actual samples at the diary farm were collected in spring and summer of 2005. The sorbents were solvent extracted and individual odor compounds were identified using GC–MS (gas chromatography–mass spectroscopy). The data obtained indicated that high volume sampling can shorten the sampling time from days to within 4 h. Both volatile organic compounds (VOCs) and volatile fatty acids (VFAs) have been identified from the dairy farm, such as phenol, methylphenol, 4-ethyl phenol, indole, methyl indole, benzyl alcohol, hexanoic acid, valeric acid and iso-valeric acid, together with some nitrogen containing compounds that have not been reported before.     

防洪物资储备决策方法初探

根据防洪抢险物资储备属于一种信息不全型决策问题的特点,本文提出了一种用于确定每年防灾物资准备量概率排序决策模型,并以孙不河流泥石流灾害预报火灾决策为例进行说明。     

上海地区农业气象灾害监测警示系统的研究

上海地区农业气象灾害监不系统是以实时气象数据为基础,根据农业气象灾害指标进行了评判分析,反映了农业气象灾害,接着,基于Activex的Web/GIS平台展示灾害的分布,并通过Internet网络,提供了多用户服务。     

Accumulation of Fluoride and Aluminium Related to Different Varieties of Tea Plant

Samples of young shoot, mature leaf, twig, root, and litter were taken from four recently bred varieties Zhe-nong 113, Zhe-nong 121, Zi-sun, and Bi-feng grown at two tea plantations located at Zhejiang and Jiangsu Provinces. The results showed that the concentrations of F and Al in tea plants were significantly different among the four varieties. It is therefore possible that F and Al concentrations in tea products can be reduced through variety selection. The results also revealed that old leaves would be the major contribution to the high levels of F and Al in brick tea since it is produced mainly for old leaves. Therefore, in order to eliminate the hazard of over-exposure to F and Al derived from tea, younger shoot should be used for making tea products while mature leaves should be avoided.     

深圳市纯电动泥头车减污降碳协同效益评价研究

新能源汽车替代传统燃油车是减缓能源与环境压力并如期实现“双碳”目标的重要途径,但在重型车辆、工程车等领域推广较为缓慢.深圳市自2019年开始推广使用纯电动泥头车,并计划到2025年新能源环卫、泥头车数量达到8000辆.为深入探究纯电动泥头车替代柴油泥头车所产生的减污降碳协同效益,本研究基于一手调研数据,采用生命周期评价方法并结合GREET模型,对比分析了两类泥头车在燃料周期、车辆周期和配套设施周期3个周期内的能耗、主要空气污染物及碳排放情况.结果表明,纯电动泥头车全生命周期内能耗较柴油泥头车可减少36.2%,主要污染物如NO_x、SO₂、VOC和PM_2.5降幅分别达81.3%、37.8%、29.0%和25.9%;温室气体(GHGs)排放强度减少14.4%,基准情境下2030年和2050年推广纯电动泥头车GHGs累计减排量分别为71.4万t和258.5万t.尽管节能减排效果显著,但其初始购置和售后维保成本过高是制约其推广的最主要因素,通过降低车辆及电池生产制造成本、提高充换电设施数量及售后维保能力等有望加快泥头车纯电动化.     

污泥掺烧对燃煤电厂痕量元素排放特性影响

采用EPAMethod29方法、冷原子吸收光谱法和电感耦合等离子体质谱法采集和分析一台超低排放燃煤机组污泥掺烧前后的原燃料、烟气和副产物样品中各痕量元素浓度,研究污泥掺烧对燃煤电厂痕量元素排放特性的影响.结果表明:污泥中富含Zn、Cu元素,浓度分别是煤样中的18.81倍和17.64倍.污泥掺烧使掺配后入炉煤中痕量元素含量普遍升高.污泥掺烧前后整个系统、锅炉系统和全流程大气污染控制设施的痕量元素质量平衡率均在可接受范围内.污泥掺烧对痕量元素的分布特征无明显影响,随粉煤灰排放是痕量元素的主要排放去向.通过烟囱排放到大气环境的痕量元素排放量占比很小,不超过0.43%.污泥掺烧前后SCR入口烟气中痕量元素除Hg外主要以颗粒态形式存在.污泥掺烧后各痕量元素在粉煤灰和底渣中的相对富集系数未显著改变.经过全流程大气污染控制设施协同控制后,污泥掺烧前后烟囱总排口痕量元素排放浓度分别为0～12.76,0～14.97μg/m³.污泥掺烧后痕量元素排放浓度均满足美国燃煤发电机组有害大气污染物排放标准、上海市燃煤耦合污泥电厂大气污染排放标准和生态环境部生活垃圾焚烧污染控制标准的限值要求....     

上海市臭氧污染时空分布及影响因素

分析2006—2016年上海市的监测数据发现,臭氧(O_3)浓度存在逐年上升趋势,污染持续时间有所增加,但除水平风速有下降趋势外,其他相关气象因素的年际变化趋势并不显著。空间分析结果表明,上海市O_3超标主要集中在西南部郊区,但市区O_3超标潜势不容忽视。O_3污染高发季节的污染玫瑰图分析发现,上海市南部地区是影响上海市O_3污染的关键区域;对于NO_2减排的影响分析发现,尽管上海市O_3平均浓度总体处于上升趋势,但在NO_2下降幅度最为明显的内环市区和北部郊区,O_3上升幅度低于NO_2下降幅度较小的内外环区域和西部郊区,表明上海市的O_3污染控制仍需持续推进NOx的减排,并同步推进VOCs的减排。     

低温浓缩-气质联用分析污染源废气中环氧氯丙烷

建立了气袋采样-液氮低温浓缩-气质联用分析污染源废气中环氧氯丙烷的方法,优化了相关监测参数。优化后的方法在环氧氯丙烷质量浓度10~500μg/m~3范围内线性良好,相关系数0.999,加标回收率为72.1%~85.7%,相对标准偏差5%,气体进样量为5.0 mL时,检出限为4.37μg/m~3,可以满足废气中环氧氯丙烷监测的要求。