环境测试舱自吸附甲醛重释放规律与影响因素研究

广泛用于板材污染物释放量测试、空气净化产品净化效果测试等实验中的环境测试舱,往往由于其内壁黏附性杂质而对目标测试物产生不可忽视的自吸附作用,自吸附污染物将作为二次释放源出现重释放,研究目标测试物的自吸附消耗量及重释放规律,探索有效控制措施,有利于对环境测试舱实验应用及室内污染控制提出指导性实际意义。分别选取0.2%甲醛溶液、大芯板作为同一自制玻璃环境测试舱2期实验(I期、Ⅱ期)的不同甲醛释放源,通过近90 d追踪测试,经不同释放源、不同控制条件下舱内壁自吸附甲醛的多次重释放实验,结合非线性拟合分析方法,总结出舱内壁自吸附甲醛重释放甲醛浓度变化符合一阶递增指数函数:y=A1×exp(-x/t1)+y0,(A1<0、t1>0)。曲线参数y0值可用于评价实验条件下测试舱内自吸附甲醛残余量;y0值与环境舱舱体材质、环境温湿度、舱外甲醛浓度及空气交换手段有关,而与释放源及其释放平衡浓度高低无明显关系。大开舱门短时间抽气式空气交换对舱内自吸附甲醛残余有适度清除效果,使y0值降低,同时有利于再次平衡状态的快速建立;而长时间的无动力空气交换,或者自来水洗及去离子水洗等处理手段对舱内壁自吸附甲醛残余无明显清除作用。     

SCR脱硝蜂窝陶瓷催化剂载体的制备

以二氧化钛、氧化铝作为主要原料,通过柱塞式挤压成型法制备了0.15 m×0.15 m×1 m规格的蜂窝陶瓷催化剂载体。通过对不同原料组成的载体性能对比,研究了各配方组分对载体性能的影响。为了提高载体活性,在21号配方的基础上加入A、B 2种商用造孔剂,考察了不同造孔剂的造孔性能。考察了蜂窝陶瓷载体负载催化剂后选择性催化还原(SCR)NO的活性,结果负载催化剂后的载体21a的在300℃时NO转化率达到最大96.5%。     

4种重金属离子对间接火焰原子吸收光谱法测定铝的干扰

空气-乙炔间接火焰原子吸收法是我国目前运用较多且易于推广的铝检测方法,研究了Mg2+、Ca2+、Zn2+和Ni2+4种离子对此法测定0.40 mg/L Al3+的干扰情况。得出如下结论:(1)在±5%误差范围内,15.10 mg/L Mg2+、105.00mg/L Ca2+、0.23 mg/L Zn2+、0.88 mg/L Ni2+对0.40 mg/L Al3+无干扰。(2)本方法虽然操作复杂,但成本较低、灵敏度高,检测的浓度范围宽、稳定性好,加标回收率为96%~99%,检出限为0.04 mg/L,适宜测定范围为0.05~100.00 mg/L,适用于饮用水、河水及地下水中Al3+的测定。     

Enhanced sorption of perfluorooctane sulfonate (PFOS) on carbon nanotube-filled electrospun nanofibrous membranes

Multi-walled carbon nanotube-filled electrospun nanofibrous membranes (MWCNT-ENFMs) were prepared by electrospinning. The addition of MWCNTs (0.5 wt.% vs. ENFMs) doubled the specific surface area and tensile strength of the ENFMs. The MWCNT-ENFMs were used to adsorb perfluorooctane sulfonate (PFOS) in aqueous solutions. The sorption kinetics results showed that the sorption rate of PFOS onto the MWCNT-ENFMs was much higher than the sorption rate of PFOS onto the pure ENFMs control, and the pseudo-second-order model (PSOM) described the sorption kinetics well. The sorption isotherms indicated that the sorption capacity of the MWCNT-ENFMs for PFOS (16.29 ± 0.26 μmol g⁻¹) increased approximately 18 times, compared with the pure ENFMs (0.92 ± 0.06 μmol g⁻¹). Moreover, the solution pH significantly affected the sorption efficiency and sorption mechanism. The MWCNT-ENFMs were negatively charged from pH 2.0–10.0, but the electrostatic repulsion between the MWCNT-ENFMs and PFOS was overcome by the hydrophobic interactions between PFOS and the MWCNTs or nanofibers. The strong hydrophobic interactions between PFOS and the MWCNTs played a dominant role in the sorption process. For the pure ENFMs, the electrostatic repulsion was conquered by the hydrophobic interactions between PFOS and the nanofibers at pH > 3.1. In addition to the hydrophobic interactions, an electrostatic attraction between PFOS and the pure ENFMs was involved in the sorption process at pH < 3.1.     

Adsorption characteristics of Cu(II) from aqueous solution onto biochar derived from swine manure

The purpose of this study was to investigate adsorption characteristic of swine manure biochars pyrolyzed at 400 °C and 700 °C for the removal of Cu(II) ions from aqueous solutions. The biochars were characterized using BET surface area, Fourier transform infrared spectroscopy (FTIR), zeta potential, scanning electron microscopy/energy dispersive spectrometer (SEM–EDS), and X-ray diffraction (XRD). The adsorption of Cu(II) ions by batch method was carried out and the optimum conditions were investigated. The adsorption processes of these biochars are well described by a pseudo-second-order kinetic model, and the adsorption isotherm closely fitted the Sips model. Thermodynamic analysis suggested that the adsorption was endothermic. The maximum Cu(II) adsorption capacities of biochars derived from fresh and composted swine manure at 400 °C were 17.71 and 21.94 mg g^?1, respectively, which were higher than those at 700 °C. XRD patterns indicated that the silicate and phosphate particles within the biochars served as adsorption sites for Cu(II). The removal of Cu(II) ions from industrial effluent indicated that the fresh swine manure biochar pyrolyzed at 400 °C can be considered as an effective adsorbent.     

Evaluating the exchange of DDTs between sediment and water in a major lake in North China

A large-scale sampling program was conducted to simultaneously collect surface water, overlying water, pore water, and sediment samples at monthly intervals between March and December 2010 from Baiyangdian Lake, North China to assess the distribution of DDTs and determine the net direction of sediment–water exchange. Total DDT concentrations ranged 2.36–22.4 ng/L, 0.72–21.9 ng/L, 2.25–33.7 ng/L, and 4.42–7.29 ng/g in surface water, overlying water, pore water, and sediments, respectively, which were at the intermediate levels compared to those of other area around the world. Seasonal variations of DDTs were featured by higher concentration in summer. This was likely associated with (a) the increase of land runoff in the summer and (b) application of dicofol and DDT-containing antifouling paints for ships in summer. Sediment–water fugacity ratios of the DDT isomers were used to predict the direction of the sediment–water exchange of these isomers. The sediment–surface water, sediment–overlying water, and sediment–pore water fugacity ratios of DDT isomers averaged 0.34, 0.44, and 0.1, which are significantly lower than the equilibrium status (1.0), suggesting that the net flux direction were from the water to sediment and the sediment acted as a sink for the DDTs. The difference of DDT concentrations between sediment and water samples was found to be an important factor affecting the diffusion of DDT from the water to sediment.     

Selective separation of deltamethrin by molecularly imprinted polymers using a β-cyclodextrin derivative as the functional monomer

A deltamethrin-imprinted polymer (MIP₁) was prepared using bis(-6-O-butanediacid monoester)-β-cyclodextrin (BBA-β-CD) as the functional monomer and toluene 2,4-diisocyanate (TDI) as the cross-linker. In comparison to the molecularly imprinted polymer where β-CD was applied as the functional monomer (MIP₂), MIP₁ showed a higher specific binding capacity (ΔC_P) and an improved imprinting factor (IF) for deltamethrin. The selective recognition experiments demonstrated that compared to MIP₂, MIP₁ could better recognize its template over other substrates that had similar chemical structures. The solid phase extraction (SPE) of deltamethrin using MIP₁ as the adsorbent was further investigated. The recoveries of the molecularly imprinted solid phase extraction (MISPE) column for deltamethrin were 83.2–93.4% with relative standard deviations (RSD) of 2.03–6.19%. The method has been successfully applied to the enrichment of trace deltamethrin from real water samples.     

TiO2镀膜电极光电催化降解酸性紫红

采用溶胶-凝胶法在钛片上涂覆TiO2薄膜为电极,自行设计组装光电催化反应器,对酸性紫红染料废水进行光电脱色处理,探讨了光电反应的协同性并研究了初始染料浓度、电压、pH和电解质浓度对脱色反应的影响。结果表明,光化学催化和电化学氧化具有协同效应,单一紫外光催化和单一电催化酸性紫红的脱色率分别为44.27%和13.12%,而光电催化(紫外、外加电压10 V)的脱色率达到77.18%。初始浓度较低、电压适中、pH偏碱性时,酸性紫红废水脱色率较高;电解质对脱色反应有促进作用,且浓度越高,酸性紫红脱色率越高。     

免烧结粉煤灰陶粒BAF对乙烯化工废水的深度处理效果

以粉煤灰为主要原料制备了免烧结粉煤灰陶粒,并将其作为曝气生物滤池(BAF)的填料用于深度处理乙烯化工厂二级生化出水。实验结果表明,在平均进水COD为54.62mg/L、平均SS为33.93mg/L、平均ρ(NH3-N)为1.33mg/L的条件下,自制免烧结粉煤灰陶粒BAF平均COD去除率为57.14%,平均SS去除率为68.64%,平均NH3-N去除率为74.89%,均略高于普通商业陶粒BAF。自制免烧结粉煤灰陶粒BAF最佳反冲洗周期为2d,并具有反冲洗耗水量小、反冲洗效果好的优势。     

乙二醇生产废水中特征污染物含量的测定

建立了气相色谱(氢火焰离子化检测器)检测乙二醇生产废水中乙二醇、二乙二醇、三乙二醇含量的新方法。该方法采用HP-FFAP型毛细管色谱柱,优化的色谱条件为:进样口温度230℃,初始柱温50℃,载气流量1.0mL/min,分流比1∶1。在质量浓度为1.0~150.0mg/L范围内,废水中各组分色谱峰面积与浓度呈良好的线性关系,相关系数均在0.9989~0.9996之间;相对标准偏差均小于2.0％;乙二醇、二乙二醇、三乙二醇的最低检出限分别为0.63,0.21,0.25mg/L,加标回收率为97.72％~103.52％。