电絮凝处理牛仔布印染废水

用铁分别作为电絮凝反应系统的阴极和阳极,研究电絮凝法对牛仔布印染废水的处理效果。考察了电极电压、反应时间和pH等因素对电絮凝法去除实验所用废水中COD和色度效果的影响。结果表明,电极电压和反应时间是主要的影响因素,pH次之。电极电压24 V,反应时间35 min,pH为7.4时,脱色率可达99%,COD去除率在70%左右,处理效果最佳。因此,电絮凝法可以作为印染废水的预处理工艺,有效降低废水COD和色度。     

酸化油渣与膨胀型阻燃剂协效阻燃环氧树脂

餐厨垃圾生产柴油中产生酸化油渣固废(AR)。采用红外光谱(FTIR)法对AR进行分析,认为AR具有较好的阻燃成炭性能。将AR与多聚磷酸铵/三聚氰胺/季戊四醇(APP/MEL/PER)膨胀阻燃体系(IFR)复配,协效阻燃环氧树脂(EP),用极限氧指数法(LOI)、垂直燃烧法(UL94)对其阻燃性能进行了检测,并通过对燃烧残渣的分析讨论了阻燃机理。结果表明,当APP/MEL/PER/AR质量分数为25%,其中AR的质量分数为2%~6%时,阻燃EP的LOI达到30%,具有良好的阻燃性能,并降低了阻燃剂及阻燃材料总体成本。研究成果对餐厨垃圾能源化起到积极推动作用。     

Box-Behnken响应曲面法优化高聚复配絮凝剂制备条件

利用活性硅酸和聚合硫酸铁制备聚合硅酸硫酸铁,再采用二甲基二烯丙基氯化铵对其进行复配改性制备高聚复配絮凝剂。在单因素实验的基础上,以絮凝剂脱As性能为评价指标,采用Box-Behnken响应曲面法考察了Fe∶Si、改性剂量、改性温度对高聚复配絮凝剂制备的单独作用及交互影响作用,并建立了剩余c(As)的数学模型。结果显示,自变量对响应值的影响次序为:Fe∶Si改性温度改性剂量,改性剂量与改性温度及改性剂量与Fe∶Si交互影响显著;数学模型拟合度程度良好,模型显著,模型预测处理后最佳剩余c(As)=18.82μg/L,最佳工艺条件为Fe∶Si=2.1∶1,改性温度=79℃,改性剂量=0.56%(PFSS溶液质量),验证实验结果为剩余c(As)=19.21μg/L,预测值与测定值偏差率为2.07%。     

Application of Markov model to environmental fate of phenanthrene in Lanzhou Reach of Yellow River

The theory of Markov Chain is used scientifically to describe the transfer/transformation of phenanthrene in Lanzhou Reach of Yellow River. In Markov Model (MM), the states of phenanthrene in Lanzhou Reach are divided into six different states, namely being degraded, leaving the system with the addvective flow, being in air, being in water, being adsorbed on suspending substances (SS), and being in bottom sediment (BS). The MM is simulated by using Matlab6.5 to reveal the temporal changes and environmental fate of phenanthrene in Lanzhou Reach. It is shown that the environmental system will be steady in 30,000-35,000 h, the final distributions of phenanthrene in air, water, SS, and BS are 23,033 kg, 1961 kg, 800 kg, and 2824 kg respectively, with the corresponding percent of 80%, 7%, 3%, and 10%.The results of MM are approximate to the results of Fugacity Model (FM), so Markov Chain can be used to evaluate the environmental fate of pollutants in multimedia environment. The outputs of MM include the following aspects: (1) The residual time of pollutant in different environmental media and the transiting time of pollutant between different environmental media; (2) The response time of the environmental system; (3) The total mass of pollutant transferred or degraded during a given time interval; (4) The time needed for the environmental system to be steady and the final steady distributions of pollutant in the environmental system.     

Photocatalytic degradation of methyl orange in aqueous suspension of mesoporous titania nanoparticles

The photodegradation of methyl orange (MO) was investigated in aqueous suspension containing titania nanoparticles with mesostructures (m-TiO(2)) under UV irradiation. The experimental results show that 98% MO can be mineralized in the 1.0 g l(-1) m-TiO(2) suspension (pH 2.0) after 45 min illumination. Particular attention was devoted to the identification and the transformation of the fragments retaining the chromophoric group. The photodegradation mechanism of the quinonoid MO mainly involves three intermedial processes: demethylation, methylation and hydroxylation. Among those processes, demethylation is more favorable than the hydroxylation, but the hydroxylation results in the largest number of intermediates. The degradation pathway of quinonoid MO under the optimal conditions is also proposed.     

Removal of phenolic estrogen pollutants from different sources of water using molecularly imprinted polymeric microspheres

The efficiency and effects of using Bisphenol A-molecularly imprinted polymeric microspheres (MIPMs) to remove phenolic estrogens from different sources of water were evaluated. MIPMs prepared by precipitation polymerization removed a group of phenolic estrogens from different kinds of water selectively and effectively. The highest removal efficiency was observed at pH=5. Fifty millimoles per litre ions or 10mg/L humid acid improved removal efficiency. MIPMs were more suitable to remove trace estrogens in large volume than high concentration of estrogens in small volume. The removal efficiency of spiked tap water, lake water and river water were better than that of distilled water. Hundred milligrams of MIPMs had higher removal selectivity and efficiency than those of 100mg or 300mg activated carbons. Moreover, MIPMs can be re-used for at least 30 times without losing any removal efficiency. MIPMs provided a selective, simple, reliable and practicable solution to remove trace phenolic estrogens from different sources of water.     

Overexpressing GSH1 and AsPCS1 simultaneously increases the tolerance and accumulation of cadmium and arsenic in Arabidopsis thaliana

The goal of this study was to develop transgenic plants with increased tolerance for and accumulation of heavy metals and metalloids from soil by simultaneous overexpression of AsPCS1 and GSH1 (derived from garlic and baker's yeast) in Arabidopsis thaliana. Phytochelatins (PCs) and glutathione (GSH) are the main binding peptides involved in chelating heavy metal ions in plants and other living organisms. Single-gene transgenic lines had higher tolerance to and accumulated more Cd and As than wild-type. Compared to single-gene transgenic lines, dual-gene transformants exhibited significantly higher tolerance to and accumulated more Cd and As. One of the dual-gene transgenic lines, PG1, accumulated twice the amount of Cd as single-gene transgenic lines. Simultaneous overexpression of AsPCS1 and GSH1 led to elevated total PC production in transgenic Arabidopsis. These results indicate that such a stacking of modified genes is capable of increasing Cd and As tolerance and accumulation in transgenic lines, and represents a highly promising new tool for use in phytoremediation efforts.     

区域环境问题和区际环境协作

本文阐述了区域环境问题的形成机制和区域间环境影响机制 ,提出进行区际环境协作加强区际环境调控以解决区域环境问题的新思路。     

多氯联苯光化学降解研究的最新进展

综述了近10年以来多氯联苯(PCBs)在有机相、表面活性剂中的直接光化学降解行为,以及PCBs在水相中的光敏化反应和光催化反应等间接光化学降解行为。从光解动力学、光解途径、光解机理以及光解产物等几方面阐述了PCBs的光化学行为,光催化降解有机污染物是一种很有发展前景的有机污染物治理技术。