Effect of an organic amendment on availability and bio-accessibility of some metals in soils of urban recreational areas

A composted biosolid from wastewater treatment was added to soils of two public parks of Sevilla, and successive samples were taken during one year. In one of the parks, a second addition of biosolid was carried out after the first year. The soil contents in metals (pseudo-total) and their plant-available and oral bio-accessible fractions were significantly altered when the soils were amended with biosolid. Increase of the bio-accessible metal contents represents a deterioration of the environmental quality of recreational areas, where hand-to-mouth transfer of pollutants to children is likely to occur, although part of the metals added might be leached by rainfall or irrigation. The limits established in several countries for metal contents of soils in recreational areas are often exceeded after application of the biosolid. A careful study of the metal contents of recycled wastes is thus recommended before being used for green area maintenance.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

The effect of paraoxon on spermatogenesis in <Emphasis Type="Italic">Dugesia gonocephala</Emphasis> from the Chilean Altiplano: proliferation and apoptosis

Introduction and aims  

The Chilean Altiplano ecosystem is conserved free from contaminants and pollutants because of the absence of major local human activities such as agriculture or other industries. We studied the effects of paraoxon on proliferation and apoptosis of testicular cells during active spermatogenesis in Dugesia gonocephala collected from a pristine river (Guacollo) in the Altiplano region nearby Visviri town, Chile.     

A comparative study of the performance of passive samplers

Atmospheric concentrations of benzene, toluene, ethylbenzene, and xylenes (o-xylene and m,p-xylene) were assessed in the Tricity area (Gdańsk-Sopot-Gdynia, Poland) with the use of two types of passive samplers: permeation (homemade passive samplers) and diffusive (Radiello and Orsa 5). Samples were collected during 2008 at selected sites in the Tricity area at monitoring stations belonging to the agency of Regional Air Quality Monitoring Foundation. The field study was conducted to compare the performance of these two different types of passive samplers. A statistical approach was formulated, and the experimental data were evaluated using the paired t test, Wilcoxon signed rank-sum test, and Friedman analysis of variance. All the statistical results confirm the hypothesis that the differences between the performances of the three sampling devices are highly significant. Despite the fact that data obtained with the homemade passive sampler indicated that the results were higher compared with those for the Radiello and Orsa 5 diffusive samplers, the authors note that all differences between the homemade permeation sampler and the Radiello and Orsa 5 diffusive samplers are positive.     

Influence of RFID tags on recyclability of plastic packaging

The use of Radio Frequency IDentification Technology (RFID) in the packaging sector is an important logistical improvement regarding the advantages offered by this technology in comparison with barcodes. Nevertheless, the presence of these devices in plastic packaging, and consequently in plastic waste, can cause several problems in the recycling plants due to the materials included in these devices.In this study, the mentioned recycling constraints have been experimentally identified in a pilot scale recycling study consisting in three recycling tests with an increasing presence of RFID tags. Differences in each test were evaluated. Furthermore, the quality of the recycled material of each test was studied through the injection and testing of tests probes.The results of the pilot scale recycling tests did not show a decrease in the quality of the recycled plastic due to the presence of RFID tags. Nevertheless, several operational problems during the recycling process were observed such as the obstruction of the screens, which lessened the process yield and created process interruptions, as well as the loss of extruded plastic during the process.These recycling constraints cannot be directly extrapolated to the industrial plants due to the different working scales. Nevertheless, technological solutions are proposed in order to avoid these recycling constraints if they appear.     

Phenol electrooxidation on Fe-Co3O4 thin film electrodes in alkaline medium

Fe-Co₃O₄ thin film with different amounts of Fe have been used for the electro-oxidation of phenol in alkaline medium at room temperature. The electrodes were prepared by coating stainless steel supports with successive layers of the oxides, obtained by thermal decomposition at 673 K. The electrolysis was carried out at constant potential and the phenol disappearance, during the electrolysis, was monitored by UV-Vis absorbance measurements between 250 and 500 nm. After 3 h of electrolysis, the intermediates were identified by comparing the HPLC data and UV-Vis spectra to those from pure standards. The results indicate that the same oxidation products are formed on the different prepared electrodes, namely the decomposition products of phenol such as benzoquinone, hydroquinone and cathecol in basic medium. Simulated results show clearly the decrease of the amount of phenolic species with the electrolysis time. An enhancement of the phenol removal is observed with the presence of iron in the oxide. Under the operating conditions, around 30% of the initial phenol has been removed at ca. 3 h and the complete degradation is obtained after 54 h of electrolysis, when Fe-Co₃O₄ thin film with 10% of Fe is used as anode.     

Conductive-diamond electrochemical oxidation of chlorpyrifos in wastewater and identification of its main degradation products by LC-TOFMS

The electrochemical transformation of the organophosphorous insecticide chlorpyrifos (CPF) was investigated in wastewater. The oxidation of CPF was carried out in a single-compartment electrochemical flow cell working under batch operation mode, using diamond-based material as anode and stainless steel as cathode. In order to evaluate its persistence and degradation pathway, two different concentration levels (1.0 mg L⁻¹ and 0.1 mg L⁻¹) were studied. Liquid chromatography/mass spectrometry was used for evaluation of the initial and electrolyzed solutions. The identification of CPF transformation products was performed by liquid chromatography-time of flight-mass spectrometry (LC-TOFMS). Results showed that CPF is completely removed at the end of treatment time. Analysis by LC-TOFMS allowed the identification of six degradation products (with Mw 154, 170, 197, 305 321 and 333). Three of the identified intermediates (Mw 170, 305 and 321) were completely removed at the end of electrolysis time. Interestingly, the formation of diethyl 3,5,6-trichloropyridin-2yl phosphate (chlorpyrifos oxon) and 3,5,6-trichloropyridin-2-ol was also found in previous reported degradation pathways using different degradation technologies.     

Influence of pH and ozone dose on the content and structure of haloacetic acid precursors in groundwater

This study investigated the effects of pH (6-10) and ozone dose [0.4-3.0?mg O(3)/mg dissolved organic carbon (DOC)] on the content and structure of haloacetic acid (HAA) precursors in groundwater rich in natural organic matter (NOM; DOC 9.85?±?0.18?mg/L) during drinking water treatment. The raw water was ozonated in a 2 L glass column. NOM fractionation was carried out using XAD resins. HAA formation potential (HAAFP) was determined according to standard EPA Method 552. NOM characterization revealed it is mostly hydrophobic (65?% fulvic and 14?% humic acids). Hydrophobic NOM significantly influences HAA formation, as confirmed by the high HAAFP (309?±?15?μg/L). Ozonation at pH?6-10 led to changes in NOM structure, i.e. complete humic acid oxidation, and increased the hydrophilic NOM fraction content (65-90?% achieved using 3.0?mg O(3)/mg DOC). The highest degree of NOM oxidation and HAA precursor removal was achieved at pH?10 (up to 68?% HAAFP). Ozonation pH influenced the distribution of HAA precursor content, as increasing the pH from 6 to 10 increased the reactivity of the hydrophilic fraction, with the HAAFP increasing from 19.1?±?6.0?μg/mg DOC in raw water to 152?±?8?μg/mg DOC in ozonated water. The degree of HAA precursor removal depends on the dominant oxidation mechanism, which is related to the applied ozone dose and the pH of the oxidation process. Ozonation at pH?10 favours the mechanism of radical NOM oxidation and was the most effective for HAAFP reduction, with the efficacy of the process improving with increasing ozone dose.     

Assessing the chemical and biological accessibility of the herbicide isoproturon in soil amended with biochar

Decamethylcyclopentasiloxane (D5) is a cyclic volatile methyl siloxane (cVMS) commonly found in commercially available products. D5 is expected to enter the terrestrial environment through the deposit of biosolids from sewage treatment plants onto agricultural fields for nutrient enrichment. Little to no information currently exists as to the risks of D5 to the terrestrial environment. In order to evaluate the potential risk to terrestrial organisms, the toxicity of a D5 contaminated biosolid in an agricultural soil was assessed with a battery of standardized soil toxicity tests.D5 was spiked into a surrogate biosolid and then mixed with a sandy loam soil to create test concentrations ranging from 0 to 4074 mg kg⁻¹. Plant (Hordeum vulgare (barley) and Trifolium pratense (red clover)) and soil invertebrates (Eisenia andrei (earthworm) and Folsomia candida (springtail)) toxicity tests were completed to assess for lethal and sub-lethal effects. Plant testing evaluated the effects on seedling emergence, shoot and root length, and shoot and root dry mass. Invertebrate test endpoints included adult lethality, juvenile production, and individual juvenile dry mass (earthworms only). Soil samples were collected over time to confirm test concentrations and evaluate the loss of chemical over the duration of a test. The toxicity of the D5 was species and endpoint dependent, such that no significant adverse effects were observed for T. pratense or E. andrei test endpoints, however, toxicity was observed for H. vulgare plant growth and F. candida survival and reproduction. Chemical losses of up to 50% were observed throughout the tests, most significantly at high concentrations.     

Phytoremediation of 2,4-dichlorophenol using wild type and transgenic tobacco plants

Introduction

Transgenic plant strategies based on peroxidase expression or overexpression would be useful for phenolic compound removal since these enzymes play an important role in phenolic polymerizing reactions.

Material and methods

Thus, double transgenic (DT) plants for basic peroxidases were obtained and characterized in order to compare the tolerance and efficiency for 2,4-dichlorophenol (2,4-DCP) removal with WT and simple transgenic plants expressing TPX1 or TPX2 gene. Several DT plants showed the expression of both transgenes and proteins, as well as increased peroxidase activity.

Results

DT lines showed higher tolerance to 2,4-DCP at early stage of development since their germination index was higher than that of WT seedlings exposed to 25?mg/L of the pollutant. High 2,4-DCP removal efficiencies were found for WT tobacco plants. TPX1 transgenic plants and DT (line d) reached slightly higher removal efficiencies for 10?mg/L of 2,4-DCP than WT plants, while DT plants (line A) showed the highest removal efficiencies (98%). These plants showed an increase of 21% and 14% in 2,4-DCP removal efficiency for solutions containing 10 and 25?mg/L 2,4-DCP, respectively, compared with WT plants. In addition, an almost complete toxicity reduction of postremoval solutions using WT and DT plants was obtained through AMPHITOX test, which indicates that the 2,4-DCP degradation products would be similar for both plants.

Conclusion

These results are relevant in the field of phytoremediation application and, moreover, they highlight the safety of using DT tobacco plants because nontoxic products were formed after an efficient 2,4-DCP removal.