Biosorption of Pb(II) by biomass of KC-2: kinetic, equilibrium and characteristic studies

Performance and characteristics of biosorption of Pb(II) had been studied in a batch system using the fungal strain biomass, KC-2. The biosorption performance was investigated by analysing the effects of such factors as the initial pH, initial Pb(II) concentration, and contact time at 303 K. The maximum Pb(II) adsorption was obtained at pH 5.0. The experimental data were described by the pseudo first-order, pseudo second-order and intraparticle diffusion kinetic models, and were closely followed the pseudo second-order kinetic model. The equilibrium experimental data were well fitted to Langmuir model and the maximum biosorption capacity was 84.03 mg g(-1). The adsorption mechanism was examined by FTIR, SEM and EDAX analysis. Results indicated that carboxylic, hydroxyl and amine groups were involved in the biosorption and ion exchange mechanism existed.     

环境预警系统的类型和构成

环境预警系统的类型和构成研究可为各级政府和企业提供决策依据。通过调研国内外环境预警系统的类型和构成要素,提出石油企业环境预警系统的设想,并对目前存在的问题进行探讨,以实现对环境事件及时预防的作用。     

三效催化剂的研究进展

全世界汽车尾气污染问题日益严重,受到社会的广泛关注和重视.当前三效催化剂作为第四代汽车尾气催化剂在世界上得到了广泛的认同,并已进行了深入的研究和开发.阐述了我国机动车尾气污染与防治的现状、三效催化转化器的工作原理及其研究进展.     

Evaluating the air quality impacts of the 2008 Beijing Olympic Games: On-road emission factors and black carbon profiles

The aggressive traffic interventions and emission control measures implemented to improve air quality during the 2008 Beijing Olympic Games created a valuable case study to evaluate the effectiveness of these measures on mitigating air pollution and protecting public health. In this paper, we report the results from our field campaign in summer 2008 on the on-road emission factors of carbon monoxide, black carbon (BC) and ultrafine particles (UFP) as well as the ambient BC concentrations. The fleet average emission factors for light-duty gasoline vehicles (LDGV) showed considerable reduction in the Olympic year (2008) compared to the pre-Olympic year (2007). Our measurement of Black Carbon (BC), a primary pollutant, at different elevations at the ambient site suggests consistent decrease in BC concentrations as the height increased near the ground level, which indicates that the nearby ground level sources, probably dominated by traffic, contributed to a large portion of BC concentrations in the lower atmospheric layer in Beijing during summertime. These observations indicate that people living in near ground levels experience higher exposures than those living in higher floors in Beijing. The BC diurnal patterns on days when traffic control were in place during the Olympic Games were compared to those on non-traffic-control days in both 2007 and in 2008. These patterns strongly suggest that diesel trucks are a major source of summertime BC in Beijing. The median BC concentration on Olympic days was 3.7 μg m⁻³, which was dramatically lower than the value on non-traffic-control days, indicating the effectiveness of traffic control regulations in BC reduction in Beijing.     

焦化废水泡沫分离液的Fenton催化氧化预处理

以焦化废水处理过程产生的泡沫分离液为研究对象,对其进行Fenton催化氧化处理实验,考察H₂O₂用量、Fe²⁺浓度、pH和反应时间4个因素对处理效果的影响,并结合GC/MS方法比较处理前后泡沫分离液中有机物的种类及其生物降解性的变化。结果表明,采用［H₂O₂］=100 mmol/L、［Fe²⁺］=100 mg/L、pH=3、反应时间为30 min的Fenton催化氧化反应条件,可以使分离液的COD去除率达到68%以上;经Fenton处理后,分离液的B/C值由0.12提高至0.38,生物降解性明显改善;通过GC/MS的分析,基本明确分离液中含有的有机物主要为酚、胺、腈、酯类有机物及喹啉、吡啶等杂环化合物,大多数属于难降解且生物毒性较强的有机物。针对这些复杂组分共存的泡沫分离液,利用Fenton试剂较强的氧化能力能够将其含有的有毒/难降解有机物转化为低毒或无毒的小分子有机物,为其后续的生物处理创造良好的条件。     

TiO_2/NiFe_2O_4磁性纳米光催化剂的制备及其光催化性能研究

先用水热法制备了纳米级NiFe2O4磁核,然后采用均匀沉淀法在NiFe2O4磁核表面包覆TiO2,制备了一种新型磁性纳米光催化剂TiO2/NiFe2O4。通过实验确定了制备TiO2/NiFe2O4的最佳Ti/Ni(摩尔比)为30/1,用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外—可见(UV—Vis)漫反射、热重—差示扫描量热分析(TG—DSC)、磁力学测试等手段对其进行了表征。以甲基橙的水溶液为模拟污染物,评价了TiO2/NiFe2O4的光催化性能,在光照2h后,甲基橙的脱色率可达98.5%。研究结果表明,TiO2/NiFe2O4是一种可重复使用的高效光催化剂。     

Carbonaceous matter and PBDEs on indoor/outdoor glass window surfaces in Guangzhou and Hong Kong,South China

Organic films, collected from indoor and outdoor window surfaces in Guangzhou and Hong Kong of South China, were analyzed to quantify their organic carbon (OC), elemental carbon (EC), and polybrominated diphenyl ethers (PBDEs) content. The highest concentrations of OC, EC, and BDE-209 were found in Guangzhou with values of 10 000 μg m^?2, 2200 μg m^?2, and 4000 ng m^?2, respectively, and the highest concentration of Σ₇PBDE (sum of BDE-28, -47, -99, -100, -153, -154 and -183) was found in Hong Kong with a value of 25 ng m^?2. In most cases, the concentrations of PBDEs were higher in the exterior films than those in the interior films with BDE-209 as the predominant congener in both cities, suggesting that PBDEs mainly come from ambient environment, and deca-BDE accounts for major PBDE consumption. The growth rates of organic film on window surfaces were fast at the beginning, and reached a consistent level afterwards. The evolution rates ranged from 2.6 to 11 nm day^?1 for “bulk film”, while from 0.06 to 0.92 nm day^?1 for “pure film”. The concentrations of PBDEs on the window surfaces did not increase with the growth time, suggesting that the window surface may provide a good place for photo-degradation of PBDEs.     

好氧膜-生物反应器中微滤膜选择的实验研究

用扫描电镜表面观察和全自动压汞仪测定了2种亲水化改性PVDF微滤膜的平均孔径、孔隙率等基本性能参数。对2种膜的纯水通量,及其平板膜组件在好氧膜生物反应器内污染过程进行分析。结果显示,2种膜污染过程均呈现先缓慢后快速的"二阶段"趋势,第二阶段是膜污染的主导阶段。尽管平均孔径小、孔隙率高的膜本身阻力大、纯水通量低,但其污染速率较低,物理及化学清洗恢复率较高。膜孔径及孔隙率指标是影响其在MBR中运行的污染速率的主要因素,平均孔径小、孔隙率高的膜抗污染能力强。     

氧化/吸附/混凝协同工艺处理焦化废水生物处理出水的过程及效果分析

针对焦化废水生物处理出水中继续存在多种有机污染物而影响达标及存在安全隐患的现状,基于废水中有机物的物理化学特性,构建了氧化/吸附/混凝的深度处理过程。在NaC lO投加量为40 mg/L,AC投加量为500 mg/L,PFS投加量为300 mg/L,反应时间为0.5 h,以及pH为7.0的最佳条件下,先氧化后吸附混凝,该过程可以实现COD去除率为75%以上,色度去除率80%以上,处理后的水样其COD值与色度值分别下降到60 mg/L及20倍以下;通过GC/MS方法分析处理前后水样中的有机物组分,发现水样中大部分单环芳香族化合物和多环芳香族化合物,部分含氮杂环化学物、有机氯化物以及溴化物被去除,但是,长链烷烃和部分芳香烃继续保留。研究结果证明了氧化/吸附/混凝协同工艺的效果与焦化废水生物出水中有机污染物的分子结构、存在形态形成构效关系,催化作用与氧化作用的协同是获得高效去除率的关键。     

板框压滤机内酒精污泥过滤脱水特性

采用螺杆泵输送和板框过滤机压滤的方法对酒精污泥进行机械脱水,研究了絮凝剂(聚丙烯酰胺PAM)添加量、污泥的进口湿含量、螺杆泵转速、过滤介质和过滤时间对污泥过滤特性的影响,并对滤饼吹气压榨进一步脱水。实验表明,在PAM添加量wPAM=3 kg/(t干污泥),污泥的进口湿含量x0=95%,螺杆泵转速n=180 r/min,过滤时间t=2.5 h并进行吹气压榨可将污泥的湿含量降至69.91%。