环境基质中药物残留的固相提取与分析

废水流出物常常不可避免地进入地表水和用于饮用水资源的含水层．因废水再循环常常进入饮用水层,各种废水中的污染物最终会污染饮用水．以往环保部门一直比较注重农药和工业污染物,但最近的研究发现:废水流出物中的某些药物残留已达到了相当令人关注(１μｇ·１－１即ｐｐｂ)的程度．传统的分析技术(如液液萃取和ＧＣ/ＭＳ) 对极性较弱的化合物(ＰＣＢｓ和许多农药)比较有效,但对于极性相对较强的药物污染物而言,固相提取(ＳＰＥ)与ＬＣ/ＭＳ技术更适合于样品提取分析。     

Foliar nutrient and metal levels of crops in the Mount Cameroon area—reference values for plant nutrition and environmental monitoring

The growing population number and traffic loads, increasing environmental pressures, agricultural intensification, and the establishment of Mount Cameroon National Park demand farsighted environmental management in the region and the definition of a favorable ecological status. Since plants grow in the interface between soils and the atmosphere they can be used as passive biomonitors for the environmental quality. At the same time, the accumulation of nutrients and pollutants in crops is linked to human health, so that foliar elemental levels can be used as an integrative measure for environmental pollution and impact assessment. In the present study, we collected leaf samples of plantain, cassava, cocoyam, and maize on 28 sites at the southern flanks of Mt. Cameroon and determined 20 chemical elements. Air pollution in the study area comes from biomass and waste burning mainly, but emissions from traffic and a large refinery were believed to also play a significant role. However, spatial patterns in foliar elemental concentrations reflected the geochemistry rather than specific sources of pollution. Significant differences in foliar metal and nutrient levels were observed between the four species, indicating a different demand and uptake of specific elements. The results were compared to published data on nutrient concentrations in the tested species and the so-called reference plant. The data can be used as a baseline for future studies in plant nutrition and the environmental monitoring in inner tropical regions where these crops are grown.     

High-frequency measurements reveal spatial and temporal patterns of dissolved organic matter in an urban water conveyance

Stormwater runoff in urban areas can contribute high concentrations of dissolved organic matter (DOM) to receiving waters, potentially causing impairment to the aquatic ecosystem of urban streams and downstream water bodies. Compositional changes in DOM due to storm events in forested, agricultural, and urban landscapes have been well studied, but in situ sensors have not been widely applied to monitor stormwater contributions in urbanized areas, leaving the spatial and temporal characteristics of DOM within these systems poorly understood. We deployed fluorescent DOM (FDOM) sensors at upstream and downstream locations within a study reach to characterize the spatial and temporal changes in DOM quantity and sources within an urban water conveyance that receives stormwater runoff. Baseflow FDOM decreased over the summer season as seasonal flows upstream transported less DOM. FDOM fluctuated diurnally, the amplitude of which also declined as the summer season progressed. During storms, FDOM concentrations were rapidly elevated to values orders of magnitude greater than baseflow measurements, with greater concentrations at the downstream monitoring site, revealing high contributions from stormwater outfalls between the two locations. Observations from custom, in situ fluorometers resembled results obtained using laboratory methods for identifying DOM source material and indicated that DOM transitioned to a more microbially derived composition as the summer season progressed, while stormwater contributions contributed DOM from terrestrial sources. Deployment of a mobile sensing platform during varying flow conditions captured spatial changes in DOM concentration and composition and revealed contributions of DOM from outfalls during stormflows that would have otherwise been unobserved.     

<Emphasis Type="Italic">Noctiluca</Emphasis> and copepods grazing on the phytoplankton community in a nutrient-enriched coastal environment along the southwest coast of India

The relative grazing impact of Noctiluca scintillans (hereafter referred only Noctiluca) and copepods (Acrocalanus gracilis, Paracalanus parvus, Acartia danae and Oithona similis) on the phytoplankton community in an upwelling–mudbank environment along the southwest coast India is presented here. This study was carried out during the Pre-Southwest Monsoon (April–May) to the Late Southwest Monsoon (August) period in 2014. During the sampling period, large hydrographical transformation was evident in the study area (off Alappuzha, Southwest coast of India); warmer Pre-Southwest Monsoon water column condition got transformed into cooler and nitrate-rich hypoxic waters during the Southwest Monsoon (June–August) due to intense coastal upwelling. Copepods were present in the study area throughout the sampling period with a noticeable increase in their abundance during the Southwest Monsoon. On the other hand, the first appearance of Noctiluca in the sampling location was during the Early Southwest Monsoon (mid-June) and thereafter their abundance increased towards the Peak Southwest Monsoon. The grazing experiments carried out as per the food removal method showed noticeable differences in the feeding preferences of Noctiluca and copepods, especially on the different size fractions of phytoplankton. Noctiluca showed the highest positive electivity for the phytoplankton micro-fraction (av. 0.49 ± 0.04), followed by nano-fraction (av. 0.17 ± 0.04) and a negative electivity for the pico-fraction (av. ?0.66 ± 0.06). In total ingestion of Noctiluca, micro-fraction contribution (83.7%) was significantly higher compared to the nano- (15.7%) and pico-fractions (0.58%). On the other hand, copepods showed the highest positive electivity for the phytoplankton nano-fraction (av. 0.38 ± 0.04) followed by micro- (av. -0.17 ± 0.05) and pico-fractions (av. ?0.35 ± 0.05). Similarly, in total ingestion of copepods, nano-fraction (69.7%) was the highest followed by micro- (28.9%) and pico-fractions (1.37%). The grazing pressure of Noctiluca on the total phytoplankton was found to be 27.7% of the standing stock and 45.6% of the production, whereas in the case of copepods, it was 9.95% of the standing stock and 16.6% of the production. The study showed that the grazing pressure of Noctiluca on the total phytoplankton as well as larger phytoplankton fraction was 2.8- and 8-folds higher than that of the copepods. This suggests the leading role of Noctiluca as an effective grazer of larger phytoplankton along the southwest west coast of India, especially during the Peak/Late Southwest Monsoon.     

Quality assessment of groundwater from the south-eastern Arabian Peninsula

Assessment of groundwater quality plays a significant role in the utilization of the scarce water resources globally and especially in arid regions. The increasing abstraction together with man-made contamination and seawater intrusion have strongly affected groundwater quality in the Arabia Peninsula, exemplified by the investigation given here from the United Arab Emirates, where the groundwater is seldom reviewed and assessed. In the aim of assessing current groundwater quality, we here present a comparison of chemical data linked to aquifers types. The results reveal that most of the investigated groundwater is not suitable for drinking, household, and agricultural purposes following the WHO permissible limits. Aquifer composition and climate have vital control on the water quality, with the carbonate aquifers contain the least potable water compared to the ophiolites and Quaternary clastics. Seawater intrusion along coastal regions has deteriorated the water quality and the phenomenon may become more intensive with future warming climate and rising sea level.     

Development and Testing of 2D Finite Difference Model in Open Channels

This study develops a depth-averaged two-dimensional (2D) numerical model using a finite difference method (FDM) on a staggered grid. The governing equations were solved using the Marker and Cell method that was developed at the Los Alamos laboratories by Harlow and Welch in 1965. In the paper, an explicit FDM was used to solve the governing equations. A first-order approximation was used for the temporal derivative. Second-order central difference approximations were used for space discretization. The time step is limited by the Courant–Friedrichs–Lewy (CFL) condition. The time step used in this study depends on the grid spacing and velocity components in the x- and y-directions. The study is divided into two steps: the first step is to develop a depth-averaged 2D numerical model to simulate the flow process. The second constructs a module to calculate the bed load transport and simulate the river morphology in the areas that have steep slopes, torrents, and mountain rivers. Developed model was applied to the artificial channel and a flood event in the Asungjun River section of the mountainous Yangyang Namdae River (South Korea). General simulation results showed that the developed model was in good agreement with the observed data.     

A Tool for Classification and Regression Using Random Forest Methodology: Applications to Landslide Susceptibility Mapping and Soil Thickness Modeling

Classification and regression problems are a central issue in geosciences. In this paper, we present Classification and Regression Treebagger (ClaReT), a tool for classification and regression based on the random forest (RF) technique. ClaReT is developed in Matlab and has a simple graphic user interface (GUI) that simplifies the model implementation process, allows the standardization of the method, and makes the classification and regression process reproducible. This tool performs automatically the feature selection based on a quantitative criterion and allows testing a large number of explanatory variables. First, it ranks and displays the parameter importance; then, it selects the optimal configuration of explanatory variables; finally, it performs the classification or regression for an entire dataset. It can also provide an evaluation of the results in terms of misclassification error or root mean squared error. We tested the applicability of ClaReT in two case studies. In the first one, we used ClaReT in classification mode to identify the better subset of landslide conditioning variables (LCVs) and to obtain a landslide susceptibility map (LSM) of the Arno river basin (Italy). In the second case study, we used ClaReT in regression mode to produce a soil thickness map of the Terzona catchment, a small sub-basin of the Arno river basin. In both cases, we performed a validation of the results and a comparison with other state-of-the-art techniques. We found that ClaReT produced better results, with a more straightforward and easy application and could be used as a valuable tool to assess the importance of the variables involved in the modeling.