Simple biotoxicity tests for evaluation of carbonaceous soil additives: establishment and reproducibility of four test procedures

Biochar derived from pyrolysis has received much attention recently as a soil additive to sequester carbon and increase soil fertility. Hydrochar, a brown, coal-like substance produced via hydrothermal carbonization, has also been suggested as a beneficial soil additive. However, before soil application, both types of char need to be tested for potential toxic effects. The aim of this study was to develop simple, inexpensive, and easy-to-apply test procedures to identify negative effects of chars but not to provide false-negative results. The following tests, based partly on ISO norm biotoxicity test procedures, were chosen: (i) cress germination test for gaseous phytotoxic emissions; (ii) barley germination and growth test; (iii) salad germination test; and (iv) earthworm avoidance test for toxic substances. Test reproducibility was ensured by carrying out each test procedure three times with the same biochar. Several modifications were necessary to adapt the tests for biochars/hydrochars. The tested biochar did not induce negative effects in any of the tests. In contrast, the beet-root chip hydrochar showed negative effects in all tests. In an extension to the regular procedure, a regrowth of the harvested barley shoots without further nutrient additions yielded positive results for the hydrochar, which initially had negative effects. This implies that the harmful substance(s) must have been degraded or they were water soluble and leached. Tests with a biochar and hydrochar showed that the proposed modified quick-check test procedures provide a fast assessment of risks and effects of char application to soils within a short period of time (<2 wk).     

Monitoring of polychlorinated biphenyl contamination and estrogenic activity in water, commercial feed and farmed seafood

We evaluated the concentration and congener distribution of seven "target" polychlorinated biphenyls (PCBs) present in water collected in different aquaculture farms of the Mediterranean area, commercial feeds, and farmed seafood. PCBs were present in feed and in tissues of all the analysed organisms at levels ranging from 1.96 ng g(-1) to 124.00 ng g(-1) wet weight, and in 10.5% of the water samples, at levels from under detection limit to 33.0 ng l(-1) with total PCB concentrations significantly higher in samples from the Tyrrhenian Sea than the Adriatic Sea. PCB congener distribution in tissues resembled that of feed, suggesting that commercial feed is an important source of PCBs. The estrogenicity of organic extracts of the samples was also evaluated by using an in vitro yeast reporter assay. Estrogenic activity higher than 10% of the activity induced by 10 nM 17 beta-estradiol was observed in 20.0% of seafood samples and 15.8% of water samples. Seafood and water samples from the Tyrrhenian Sea were more frequently estrogenic than the Adriatic ones (16.45 versus 4.08%). A significant correlation of total PCB concentrations on biological activity was observed for sea bass and mussels from the Adriatic Sea (p < 0.045 and p < 0.04, respectively), and for sea bass of the Tyrrhenian Sea (p = 0.05). These results indicate the need of an integral approach in the exposure assessment to potential toxic compounds for human via food.     

The equivalence of diffusive samplers to reference methods for monitoring O3, benzene and NO2 in ambient air

A study of the equivalence to the reference methods of the Radiello samplers for ozone (O(3)) and benzene as well as the membrane-closed Palmes tube (MCPT) for nitrogen dioxide (NO(2)) is presented. These samplers benefit from new model equations capable of estimating their uptake rate. For O(3), the aim here was to demonstrate the equivalence for the reference period of 8 h and 120 microg m(-3), the target value of the 3rd European Daughter Directive. For benzene, the demonstration of equivalence to the annual limit value of 5 microg m(-3) of the 2nd European Daughter Directive was examined. In the case of NO(2), the equivalence to the annual limit value of the 1st European Daughter Directive (40 microg m(-3)) was considered. Results show that the radial sampler for O(3) fails to meet the Data Quality Objective (DQO) for continuous monitoring. However, with an expanded uncertainty of less than 30%, the O(3) diffusive sampler fulfils the DQO for indicative measurements. For benzene, the Radiello sampler exposed for 7 days gave satisfying results showing the ability of the sampler to meet the DQO of the reference method. Nevertheless, the field tests should be complemented by measurements for a wider range of benzene concentrations. In the case of NO(2), all the results of the laboratory and field experiments respected the requirements necessary for the demonstration of equivalence. Overall, these findings thus show that the Radiello sampler and the MCPT are equivalent to the reference methods only for assessment of benzene and NO(2), respectively.     

Existential threat and compliance with pro-environmental norms

Recent research on the effects of personal threat suggests that perceived threat might enhance pro-environmental behavior when pro-environmental norms are in focus. In three experiments we found support for the latter assumption, showing that mortality salience and salience of pro-environmental norms interacted in predicting pro-environmental attitudes and information search (Study 1), sustainable behavior in a forest management game (Study 2), as well as pro-environmental intentions and behavior (Study 3). Specifically, mortality salience increased pro-environmental conduct only when pro-environmental norms were salient. Moreover, norm salience only had an effect on pro-environmental attitudes and behavior when the threat of personal mortality was salient. We discuss the implications of these results for both terror management theory and the promotion of pro-environmental behaviors.     

Sex pheromone component ratios and mating isolation among three Lygus plant bug species of North America

The plant bugs Lygus hesperus, Lygus lineolaris, and Lygus elisus (Hemiptera: Miridae) are major pests of many agricultural crops in North America. Previous studies suggested that females release a sex pheromone attractive to males. Other studies showed that males and females contain microgram amounts of (E)-4-oxo-2-hexenal, hexyl butyrate, and (E)-2-hexenyl butyrate that are emitted as a defense against predators. Using gas chromatography–mass spectrometry, we found that female L. lineolaris and L. elisus have a 4:10 ratio of hexyl butyrate to (E)-2-hexenyl butyrate that is reversed from the 10:1 ratio in female L. hesperus (males of the three species have ~10:1 ratio). These reversed ratios among females of the species suggest a behavioral role. Because both sexes have nearly equal amounts of the major volatiles, females should release more to attract males. This expectation was supported because L. hesperus females released more hexyl butyrate (mean of 86 ng/h) during the night (1800–0700 hours) than did males (<1 ng/h). We used slow-rotating pairs of traps to test the attraction of species to blends of the volatiles with a subtractive method to detect synergism. Each species’ major butyrate ester was released at 3 μg/h, the minor butyrate according to its ratio, and (E)-4-oxo-2-hexenal at 2 μg/h. The resulting catches of only Lygus males suggest that (E)-4-oxo-2-hexenal is an essential sex pheromone component for all three species, (E)-2-hexenyl butyrate is essential for L. elisus and L. lineolaris, and hexyl butyrate is essential for L. hesperus. However, all three components are recognized by each species since ratios of the butyrate esters are critical for conspecific attraction and heterospecific avoidance by males and thus play a role in reproductive isolation among the three species. Because L. hesperus males and females are known to emit these major volatiles for repelling ant predators, our study links defensive allomones in Lygus bugs with an additional use as sex pheromones.     

AnSBBR applied to the treatment of wastewater from a personal care industry: Effect of organic load and fill time

The objective of this work was to study the technological feasibility of treating wastewater from a personal care industry (PCI-WW) in a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) containing immobilized biomass on polyurethane foam. An assessment was made on how system efficiency and stability would be affected by: increasing organic load; supplementation of nutrients and alkalinity; and different feed strategies. The AnSBBR operated with 8-h cycles, stirring speed of 400 rpm, temperature of 30 °C, and treated with 2.0 L wastewater per cycle. First the efficiency and stability of the AnSBBR were studied when submitted to an organic loading rate (OLR) of 3.1–9.4 gCOD/(L d), and when the PCI-WW was supplemented with nutrients (sucrose, urea, trace metals) and alkalinity. The AnSBBR was shown to be robust and presented stability and removal efficiency exceeding 90%. At an OLR of 12.0 gCOD/(L d) efficiency became difficult to maintain due to the presence of commercial cleansers and disinfectants in the wastewater lots. In a subsequent stage the AnSBBR treated the wastewater supplemented with alkalinity, but with no nutrients at varying feed strategies and maintaining an OLR of approximately 9.0 gCOD/(L d). The first strategy consists of feeding 2.0 L of the influent batchwise [OLR of 9.4 gCOD/(L d)]. In the second 1.0 L of influent was fed-batchwise and an additional 1.0 L was fed fed-batchwise [OLR of 9.2 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was maintained but supplied in different periods. In the third strategy 1.0 L of treated effluent was maintained in the reactor and 1.0 L of influent was fed fed-batchwise [OLR of 9.0 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was different but the feed period was the same and the OLR was maintained by increasing the influent concentration. Comparison of the first and second strategies revealed that organic matter removal efficiency was unaffected (exceeding 90%). The third strategy resulted in a reduction in average removal efficiency from 91 to 83% when compared to the first one. A kinetic study resulted in first order kinetic parameters ranges from 0.42 to 1.46 h⁻¹ at OLRs from 3.1 to 12.0 gCOD/(L d), respectively, and the second feed strategy [OLR of 9.2 gCOD/(L d)] was shown to be the most favorable.     

Flue gas desulfurization gypsum and coal fly ash as basic components of prefabricated building materials

The manufacture of prefabricated building materials containing binding products such as ettringite (6CaO·Al₂O₃·3SO₃·32H₂O) and calcium silicate hydrate (CSH) can give, in addition to other well-defined industrial activities, the opportunity of using wastes and by-products as raw materials, thus contributing to further saving of natural resources and protection of the environment.Two ternary mixtures, composed by 40% flue gas desulfurization (FGD) gypsum or natural gypsum (as a reference material), 35% calcium hydroxide and 25% coal fly ash, were submitted to laboratory hydrothermal treatments carried out within time and temperature ranges of 2 h–7 days and 55–85 °C, respectively. The formation of (i) ettringite, by hydration of calcium sulfate given by FGD or natural gypsum, alumina of fly ash and part of calcium hydroxide, and (ii) CSH, by hydration of silica contained in fly ash and residual lime, was observed within both the reacting systems. For the FGD gypsum-based mixture, the conversion toward ettringite and CSH was highest at 70 °C and increased with curing time. Some discrepancies in the hydration behavior between the mixtures were ascribed to differences in mineralogical composition between natural and FGD gypsum.     

Volatile fatty acid evolution in biomass mixture composts prepared in open and closed bioreactors

In this study we observed the production of volatile fatty acids (VFAs) during the composting process of compost heaps in two different bioreactors (open and closed) at three different depths (0, 40 and 80 cm). The compost was prepared as a mixture of bio-waste, horse manure, grass and sawdust to ensure sufficient pH conditions in compost heaps. VFA contents in the composting materials were analysed weekly over 14–119 d. The degradation process was monitored, along with temperature, pH, total organic carbon, oxidizable carbon and mono- and oligosaccharides. VFA contents were evaluated with regard to the depth of the sample site in the compost heap and to conditions in the bioreactors. The maximum VFA occurrence was observed during the first 35 d; acetic and propionic acids in particular were determined to occur in each sample. Considerable variations in their formation and elimination were observed in the two bioreactors as well as at the various depths in the compost heaps. Significant correlations were found between individual VFAs, as well as between VFA concentrations and organic carbon contents.